Bike details
Overview
Key information split into simple groups.
Bike summary
-
Category -
Frame aluminium -
Wheels 29" -
Travel Front 60mm -
Fork Suntour NEX
-
Groupset Alivio -
Suspension Hardtail -
Motor Bosch 250W 50Nm mid-drive -
Drivetrain 1 × 9 -
Brakes Hydraulic Disc
Parts list
Components
Main components, grouped by system.
Bike components
Frame
Frame
AL-6061 Low-step Alloy with Ultra Light butted tubing, fully-internal battery and internal cables
Suspension Fork
Suntour NEX E-25 HLO, 60mm, 30mm stanchions, tapered steerer, hydraulic lockout
Drivetrain
Rear Derailleur
Shimano Alivio 9 speed
Shift Levers
Shimano Alivio 9 speed
Cassette
Shimano HG200 Cassette, 9-speed 11-34T
Crank
Prowheel Alloy, 38T
Chain
KMC X9
Pedals
VP retro with alloy body and rubber gripper
Wheels
Front Hub
Front: Shimano M3050 Centrelock 32H, Rear: Shimano M3050 Centrelock Cassette 32H
Rear Hub
Front: Shimano M3050 Centrelock 32H, Rear: Shimano M3050 Centrelock Cassette 32H
Rims
Alex TD26 Double-wall Alloy 32H
Spokes
Stainless Steel
Tires
Kenda Small Block 8 29 x 1.75 with K Shield, reflective logos & AV tube
Brakes
Brakes
Shimano MT200 Hydraulic Disc, 180 front/160 rear Centrelock Rotors
Brake Levers
Shimano MT200 hydraulic
Cockpit
Handlebar
Alloy riser bar, 15deg rear sweep
Grips
Ergonomic comfort
Headset
Integrated Threadless 1/8th-1.5" tapered
Seat
Saddle
Selle Royal Lookin comfort with RoyalGel padding
Seatpost
Alloy Micro Adjust 31.6mm
Motor & Battery
Motor
Bosch G3 Active Line Plus
Fit data
Geometry
Numbers for sizing and ride feel.
| Size | SM/MD | MD/LG |
|---|---|---|
| Stack Reach Ratio | 1.54 mm | 1.59 mm |
| Front Center | 650 | 655 mm |
| Rake | 51 mm | 50 mm |
| Trail | 73 mm | 74 mm |
| Stack | 604 mm | 623 mm |
| Reach | 392 mm | 391 mm |
| Top Tube Length | 578 mm | 588 mm |
| Seat Tube Angle | 73 ° | 73.5 ° |
| Seat Tube Length | 415 mm | 455 mm |
| Head Tube Angle | 70 ° | 70 ° |
| Head Tube Length | 130 mm | 150 mm |
| Chainstay Length | 471 mm | 471 mm |
| Wheelbase | 1114 mm | 1119 mm |
| Bottom Bracket Drop | 60 mm | 60 mm |
| Standover Height | 700 | 714 mm |
| Wheels | 29" | 29" |
About this model
Explorer-E2 Low is part of the Avanti E Explorer E2 model. There are 6 e-bikes that carry this model name. You can get a glimpse at all models from 2021, by clicking on this link.
Safety
When you go for a ride, don’t forget to put your helmet on. Moreover, ride with traffic, not against it. This will help you stay visible to drivers and also makes it easier for them to see you.
General Urban e-bikes average price
If you want to purchase a solid General Urban e-bike, it is important to know that the average cost is 2098$. However, you could also get a good General Urban e-bike even if you pay a lower amount than the average price. As a general rule of thumb, you should always read reviews about the e-bike and its components before buying it to ensure you don’t pay too much.
Internal Cable Routing
Moreover, this bike comes with internal cable routing allowing you to keep the cables in a good condition. It also makes it look more professional.
Explorer-E2 Low components
Fork
The Explorer-E2 Low comes factory-installed with the Suntour NEX fork. This has a travel range of 60mm. Bike forks are perfect to absorb shocks and provide a great riding experience overall. To sum it all, when buying a bike, ensure that you look for a fork capable of decent travel.
Wheels
When it comes to wheels, the Explorer-E2 Low e-bike is equipped with the 29″ aluminum model. With 29″ wheels, bumps will feel lighter and you’ll gain more speed on descends, compared to smaller wheel-sized bikes. However, the 29″ wheels will add a little more weight to the e-bike itself.
Brakes
Nothing is more important on a bike than its ability to brake properly. Avanti Explorer-E2 Low is equipped with Hydraulic Disc brakes. With Hydraulic Disc brakes, you’ll be able to stop on a dime, even in wet or icy conditions. To sum up, you can ride your bike with confidence.