yt Industries Tues CORE 4 27 2022
2022 Mountain
Estimate price |
5,999$
Weight | 15.2 kg 
Bike details
Overview
Key information split into simple groups.
Bike summary
-
-
Frame Carbon -
Wheels 27.5" -
Travel Front 203mm -
Travel Rear 200mm -
Fork Fox Factory Float 40
-
Groupset X01 -
Suspension Full -
Drivetrain 1 × 7 -
Brakes Hydraulic Disc
Sizing
Recommended size guide.
Regular
167cm - 181cm
Long
179cm - 193cm
X-Long
191cm - 205cm
Parts list
Components
Main components, grouped by system.
Bike components
Frame
Suspension Fork
FOX 40 FLOAT FACTORY, 27,5“ | 203 mm Travel | 110 x 20 mm Axle | 48 mm Offset I Flat Crown (S-L) I Drop Crown (XL-XXL) Grip2 Damper, Adjustable High- and Low-Speed Compression and Rebound, Air Pressure, Kashima Coating
Rear Shock
FOX FLOAT X2 FACTORY, Shock Length: 267 mm | Shock Stroke: 89 mm ? 200 mm Travel Adjustable High- and Low-Speed Compression and Rebound, Air Pressure, Kashima Coating
Drivetrain
Rear Derailleur
SRAM X01 DH, 7-speed | Medium Cage
Shift Levers
SRAM X01 DH, 7-speed
Cassette
E13 LG1, 9-21T | 7-speed
Crank
SRAM X01 DH, Crank Arm Length 165 mm | 34 T Custom | DUB Custom
Chain Guide
E13 LG1 PLUS, I05 | 32-34 T
Wheels
Rims
E13 LG1 RACE DH CARBON, Carbon Rim 27,5“ | Inner Width 30 mm | Front Hub 110 x 20 mm | Rear Hub 150 x 12 mm | Direct Mount
Tires
MAXXIS ASSEGAI, Tire Size 27.5“ x 2.5 | DH Casing | 3C MaxxGrip Compound | Tubeless Ready
Brakes
Brakes
SRAM CODE RSC, Rotor CENTERLINE Ø front 203 mm / rear 200 mm Adjustable Bite Point and Reach
Cockpit
Stem
RENTHAL INTEGRA 35, Length 50 mm | 35 mm Clamp | Rise 0°
Handlebar
RENTHAL FATBAR 35, Width 800 mm | Rise 30 mm | 7° Back Sweep | 5° Up Sweep | Custom Black
Grips
ODI ELITE MOTION V2.1, Lock On
Headset
ACROS AZX-255, ZS49 ZS56 | High Cap | 1 Spacer 5 mm
Seat
Saddle
SDG I-FLY 2.0, YT Custom | Width 128 mm I I-Beam
Seatpost
SDG I-BEAM CARBON, Ø 30.6 mm | Length 300 mm
Fit data
Geometry
Numbers for sizing and ride feel.
| Size | Regular | Long | X-Long |
|---|---|---|---|
| Stack Reach Ratio | 1.37 mm | 1.32 mm | 1.27 mm |
| Bottom Bracket Height | 349 mm | 349 mm | 349 mm |
| Front Center | 827 mm | 851 mm | 879 mm |
| Rake | 59 mm | 59 mm | 59 mm |
| Trail | 111 mm | 111 mm | 111 mm |
| Stack | 632 mm | 639 mm | 646 mm |
| Reach | 463 mm | 483 mm | 508 mm |
| Top Tube Length | 654 mm | 678 mm | 707 mm |
| Seat Tube Angle | 73.2 ° | 73 ° | 72.8 ° |
| Seat Tube Length | 420 mm | 420 mm | 420 mm |
| Head Tube Angle | 63.5 ° | 63.5 ° | 63.5 ° |
| Head Tube Length | 100 mm | 108 mm | 115 mm |
| Chainstay Length | 443 mm | 443 mm | 443 mm |
| Wheelbase | 1269 mm | 1293 mm | 1321 mm |
| Bottom Bracket Drop | 25 mm | 25 mm | 25 mm |
| Standover Height | 723 mm | 721 mm | 715 mm |
| Wheels | 27" | 27" | 27" |
| Rider Min Height | 167 cm | 179 cm | 191 cm |
| Rider Max Height | 181 cm | 193 cm | 205 cm |
About this model
Tues CORE 4 27 belongs to the Yt Tues model. YT Industries launched 35 bikes of this model so far. Check out the entire range from 2022 of this model, by clicking this link.
Model range prices
The most economical model, the YT Industries Tues CORE 2 27 2022 has a starting price of 3499$. YT Industries Tues Pro Race 29 2022 on the other hand is the most expensive at 6688$.
Safety
Take safety seriously when you ride your bike, and always wear your helmet. Moreover, don’t ride on the sidewalk. This is actually against the law in some states and can be dangerous for both you and pedestrians.
Average price for Downhill bikes
Our math shows that the average cost of a dependable Downhill bike is 3391$. However, this doesn’t mean that if you spend less money on a Downhill bike, you couldn’t get a decent one. As a general rule of thumb, you should always read reviews about the bike and its components before buying it to ensure you don’t pay too much.
Furthermore, this bike was made available in 2022 for 5999$. Comparing the average cost of a Downhill bike to this one, you will see that Tues CORE 4 27 price is 76.91% higher.
Average weight for Downhill bikes
The average weight for Downhill bikes is 15.89 kg (35.03 lbs). You will have a greater advantage on climbs if your bike is easier than the average. On descents, however, a heavier bike will give you extra speed.
YT Industries Tues CORE 4 27 it’s weighing 15.2 kg (33.51 lbs). At this weight, is slightly lighter than average. To sum up, it’s 4.54% lighter than the average weight of Downhill bikes.
Tues CORE 4 27 components
Fork
The Tues CORE 4 27 comes factory-installed with the Fox Factory Float 40 fork. This has a travel range of 203mm. Bike forks are perfect to absorb shocks and provide a great riding experience overall. To sum it all, when buying a bike, ensure that you look for a fork capable of decent travel.
Rear Shock
YT Industries Tues CORE 4 27 bike has the FOX FLOAT X2 FACTORY model installed, and has a travel of 200mm. Rear shocks offer better comfort, better traction, and better cornering. This allows for quicker riding on rough roads and trails. In short, if you want smooth rides, get a full-suspension bicycle.
Wheels
As for the wheels, YT Industries Tues CORE 4 27 2022, has a 27.5″ carbon model. 27.5″ wheels will reach higher speeds than smaller-sized wheels. However, these wheels have a slower top speed if you compare them to 29″ wheels.
Brakes
Nothing is more important on a bike than its ability to brake properly. YT Industries Tues CORE 4 27 is equipped with Hydraulic Disc brakes. Hydraulic disc brakes provide amazing stopping power, no matter what the terrain. To sum up, you can ride your bike with confidence.
Sizes
There are 3 sizes available for this model. Rider height can be anywhere between 167 cm – 205 cm (5.48 ft – 6.73 ft). In conclusion, it won’t take much to find one that’s right for you.