Jamis HARDLINE C1 2022
2022 Mountain
Estimate price |
9,499$
Weight | 13.72 kg 
Bike details
Overview
Key information split into simple groups.
Bike summary
-
-
Frame Carbon -
Wheels 27.5" -
Travel Front 170mm -
Travel Rear 160mm -
Fork Fox Factory Float 38
-
Groupset XTR -
Suspension Full -
Drivetrain 1 × 12 -
Brakes Hydraulic Disc
Sizing
Recommended size guide.
SM
158cm - 171cm
MD
168cm - 180cm
LG
178cm - 189cm
XL
186cm - 199cm
Parts list
Components
Main components, grouped by system.
Bike components
Frame
Frame
Dyad Pro High Modulus Carbon Fiber, 160mm travel 3VO suspension, Enduro® Max sealed bearing pivots, 1.5 – 1 1/8” tapered head tube, 12x148mm thru-axle, Internal dropper post routing, Custom Jamis upper chainguide, MRP SXg lower chainguide, Fox DHX2 Factory Series coil shock w/2-position compression switch, SLS 400lb Spring, high/low speed compression, high/low speed rebound,10mm hardware, replaceable derailleur hanger
Suspension Fork
Fox 38 Factory Series Float 27.5? w/ 3-position adjust compression & lock-out,15x110mm axle, air spring compression, rebound adjust, tapered alloy steerer, 170mm travel, 44mm rake
Drivetrain
Rear Derailleur
Shimano XTR, 12-speed
Shift Levers
Shimano XTR, 1×12-speed
Cassette
Shimano M9100, 12-speed, 10-51T
Crank
Shimano XTR M9120, 32T
Bottom Bracket
Shimano BSA
Chain
Shimano M9100, 12-speed
Pedals
N/A
Wheels
Rims
Stans Flow CB7 Carbon 27.5? tubeless wheels, 15x110mm axle front and 12x148mm rear E-SYNC hubs, Sapim D-Light spokes
Tires
Vittoria Mazza 27.5 x 2.4?, TNT tubeless
Brakes
Brakes
Shimano XTR M9120 4-piston Ice-Tech hydraulic disc, RT-900 180mm rotors
Cockpit
Stem
Race Face Turbine R, 50mm extension, 35mm clamp diameter
Handlebar
Race Face Turbine R, 800mm x 20mm rise, 35mm diameter
Grips
Jamis Lock-On
Headset
FSA Orbit IS Integrated, 8mm cone spacer
Seat
Saddle
WTB Volt
Seatpost
Fox Transfer Factory Series Dropper, 1x remote
Fit data
Geometry
Numbers for sizing and ride feel.
| Size | SM | MD | LG | XL |
|---|---|---|---|---|
| Stack Reach Ratio | 1.41 mm | 1.36 mm | 1.31 mm | 1.28 mm |
| Bottom Bracket Height | 342 mm | 342 mm | 342 mm | 342 mm |
| Front Center | 728 mm | 753 mm | 779 mm | 804 mm |
| Rake | 40 mm | 39 mm | 39 mm | 39 mm |
| Trail | 122 mm | 123 mm | 123 mm | 123 mm |
| Stack | 579 mm | 589 mm | 598 mm | 607 mm |
| Reach | 412 mm | 433 mm | 455 mm | 476 mm |
| Top Tube Length | 579 mm | 604 mm | 629 mm | 654 mm |
| Seat Tube Angle | 73.5 ° | 73.5 ° | 73.5 ° | 73.5 ° |
| Seat Tube Length | 394 mm | 432 mm | 483 mm | 533 mm |
| Head Tube Angle | 65 ° | 65 ° | 65 ° | 65 ° |
| Head Tube Length | 100 mm | 110 mm | 120 mm | 130 mm |
| Chainstay Length | 423 mm | 423 mm | 423 mm | 423 mm |
| Wheelbase | 1151 mm | 1176 mm | 1202 mm | 1227 mm |
| Bottom Bracket Drop | 13 mm | 13 mm | 13 mm | 13 mm |
| Standover Height | 745 mm | 739 mm | 743 mm | 759 mm |
| Wheels | 27" | 27" | 27" | 27" |
| Rider Min Height | 158 cm | 168 cm | 178 cm | 186 cm |
| Rider Max Height | 171 cm | 180 cm | 189 cm | 199 cm |
About this model
HARDLINE C1 belongs to the Jamis Hardline model. There are 29 bikes that carry this model name. Check out the entire range from 2022 of this model, by clicking this link.
Model range prices
Jamis HARDLINE A2 2022 is the most economical model, with a starting price of 3799$. Jamis HARDLINE C1 2022 on the other hand costs 9499$, and is the most expensive model.
Safety
Your safety is a top priority so always wear a helmet when you ride your bike. Moreover, wear the right clothing. You want to be visible to other drivers, so avoid wearing dark clothing.
Average price for Enduro bikes
If you want an acceptable Enduro bike you should know that the average price is 3599$. However, this doesn’t mean that if you spend less money on an Enduro bike, you couldn’t get a decent one. As a general rule of thumb, you should always read reviews about the bike and its components before buying it to ensure you don’t pay too much.
Furthermore, this bike was made available in 2022 for 9499$. Doing a quick comparison, we notice that HARDLINE C1 price is 163.93% higher than the average cost of an Enduro bike.
Enduro bikes average weight
If we make a quick analysis of the average weight of an Enduro bike, we get 14.27 kg (31.46 lbs). It is a good advantage to have a lighter bike than the average. However, a heavier bike is more efficient on descents.
slightly lighter than average, HARDLINE C1 has a weight of 13.72 kg (30.25 lbs). In conclusion, the average Enduro bike weighs 4.01% more than HARDLINE C1.
Internal Cable Routing
Moreover, this bike comes with internal cable routing allowing you to keep the cables in a good condition. It also makes it look more professional.
HARDLINE C1 components
Fork
Jamis HARDLINE C1 2022 bike is equipped with the Fox Factory Float 38 fork, and has 170mm travel. Bike forks are good shock absorbers and provide a smooth ride and a great experience. In short, you should always ensure you have a good fork when purchasing a bike.
Fork material
HARDLINE C1 has an aluminum fork, which is a lighter material. However, it is not as tough, nor durable as steel is.
Rear Shock
Rear shocks improve riding comfort and give you greater control over all terrains. In short, a full-suspension bike will give you the smoothest ride possible.
Wheels
When leaving the production line, the HARDLINE C1 model has 27.5″ carbon wheels. The 27.5″ wheels are a great choice for smaller riders. However, the 27.5″ wheels are less forgiving than the 29″ wheels.
Brakes
For your safety, it is important to have quality breaks on your bike. Jamis HARDLINE C1 has Hydraulic Disc brakes installed. Hydraulic disc brakes are perfect for mountain biking, road cycling, and commuting. To sum up, you can ride your bike with confidence.
Sizes
There are 4 sizes available for this model. Rider height can be anywhere between 158 cm – 199 cm (5.18 ft – 6.53 ft). In short, it won’t be difficult to find the right one for you.
Dropper post
The Jamis model is also equipped with a dropper post. If you are a technical rider, a dropper post is essential. A dropper post provides increased safety while riding. The lever system, allows you to move your saddle up and down, which is very useful on climbs and descends.