Bike details
Overview
Key information split into simple groups.
Bike summary
-
-
Frame Aluminum -
Wheels 26" -
Travel Front 100mm -
Groupset microSHIFT, microSHIFT Mezzo -
Suspension Hardtail -
Drivetrain 1 × 7 -
Brakes Rim
Parts list
Components
Main components, grouped by system.
Bike components
Frame
Frame
26" GT LegitFit Design, Alloy w/ Replaceable Hanger
Suspension Fork
All Terra CH-565, 100mm, Coil
Drivetrain
Rear Derailleur
microSHIFT RD-M26C
Shift Levers
microSHIFT TS39-7, 7-speed
Cassette
Sunrace, 14-34, 7-speed Freewheel
Crank
Prowheel w/ Double Guard, 30T, 130mm
Bottom Bracket
Cartridge Sealed
Chain
KMC Z7, 7-speed
Pedals
GT BMX Flat Pedal, Resin
Wheels
Front Hub
Alloy, QR
Rear Hub
Alloy Freewheel, QR
Rims
All Terra Double Wall, 32h
Spokes
Stainless Steel, 14g
Tires
Front: Kenda Small Block Eight, 26 x 2.10", Rear: Kenda Small Block Eight, 26 x 2.10"
Brakes
Brakes
GT V-Brake
Brake Levers
Tektro 3 Finger
Cockpit
Stem
Alloy Ahead, 30mm
Handlebar
Steel Riser Bar, 20mm Rise, 540mm Width
Grips
GT MTB
Headset
1 1/8" Ahead
Seat
Saddle
GT MTB
Seatpost
Alloy Micro Adjust
Fit data
Geometry
Numbers for sizing and ride feel.
| Size | One Size |
|---|---|
| Stack Reach Ratio | 1.45 mm |
| Bottom Bracket Height | 243 mm |
| Front Center | 474 mm |
| Rake | 40 mm |
| Trail | 57 mm |
| Stack | 402 mm |
| Reach | 277 mm |
| Top Tube Length | 443 mm |
| Seat Tube Angle | 68 ° |
| Seat Tube Length | 255 mm |
| Head Tube Angle | 69.5 ° |
| Head Tube Length | 88 mm |
| Chainstay Length | 357 mm |
| Wheelbase | 830 mm |
| Bottom Bracket Drop | 23 mm |
| Standover Height | 507 mm |
| Wheels | 26" |
Model Overview
Stomper Prime 26 is a Gt Stomper model. GT launched 33 bikes of this model so far. Check out the entire range from 2023 of this model, by clicking this link.
Model range prices
GT Stomper Prime 20 2023 is the most affordable bike of this model and has a price of 425$. On the other hand, GT Stomper FS Ace 2023, is the most expensive and costs 1500$.
Safety
Make sure you wear a helmet on every ride, and that your bike performs well. In short, this means checking the tires, brakes, and chain to make sure everything is in good working order.
Average price for Mountain bikes
Our math shows that the average cost of a dependable Mountain bike is 616$. However, you could also get a good Mountain bike even if you pay a lower amount than the average price. In short, before purchasing your ideal bike do some research about its components, and also check for reviews online.
When GT released this model in 2023, its price was 550$. Comparing this to the average Mountain bike price, we see that the price is 12% lower.
Overview of components
Wheels
The Stomper Prime 26 2023 bike is equipped with 26″ aluminum wheels when leaving the factory. Being a little smaller, these wheels will fit both small and tall riders. However, they provide less traction than 29″ wheels do.
Brakes
We ride faster and faster, so a good braking system is essential on a bike nowadays. The Stomper Prime 26 comes with Rim brakes. Slightly lighter than hydraulic brakes, rim brakes are a budget choice. However, they have problems in wet conditions.