Jamis HARDLINE C1 2023
Bike details
Key information split into simple groups.
Bike summary
-
-
Frame Carbon
-
Wheels 27.5"
-
Travel Front 170mm
-
Travel Rear 160mm
-
Fork Fox Factory Float 38
-
Groupset XTR
-
Suspension Full
-
Drivetrain 1 × 12
-
Brakes Hydraulic Disc
Recommended size guide.
SM
158cm - 171cm
MD
168cm - 180cm
LG
178cm - 189cm
XL
186cm - 199cm
Parts list
Main components, grouped by system.
Bike components
Frame
Frame
Dyad Pro High Modulus Carbon Fiber, 160mm travel 3VO suspension, Enduro® Max sealed bearing pivots, 1.5 – 1 1/8” tapered head tube, 12x148mm thru-axle, Internal dropper post routing, Custom Jamis upper chainguide, MRP SXg lower chainguide, Fox DHX2 Factory Series coil shock w/2-position compression switch, SLS 400lb Spring, high/low speed compression, high/low speed rebound,10mm hardware, replaceable derailleur hanger
Suspension Fork
Fox 38 Factory Series Float 27.5? w/ 3-position adjust compression & lock-out,15x110mm axle, air spring compression, rebound adjust, tapered alloy steerer, 170mm travel, 44mm rake
Drivetrain
Rear Derailleur
Shimano XTR, 12-speed
Shift Levers
Shimano XTR, 1×12-speed
Cassette
Shimano M9100, 12-speed, 10-51T
Crank
Shimano XTR M9120, 32T
Bottom Bracket
Shimano BSA
Chain
Shimano M9100, 12-speed
Pedals
N/A
Wheels
Rims
Stans Flow CB7 Carbon 27.5? tubeless wheels, 15x110mm axle front and 12x148mm rear E-SYNC hubs, Sapim D-Light spokes
Tires
Vittoria Mazza 27.5 x 2.4?, TNT tubeless
Brakes
Brakes
Shimano XTR M9120 4-piston Ice-Tech hydraulic disc, RT-900 180mm rotors
Cockpit
Stem
Race Face Turbine R, 50mm extension, 35mm clamp diameter
Handlebar
Race Face Turbine R, 800mm x 20mm rise, 35mm diameter
Grips
Jamis Lock-On
Headset
FSA Orbit IS Integrated, 8mm cone spacer
Seat
Saddle
WTB Volt
Seatpost
Fox Transfer Factory Series Dropper, 1x remote
Fit data
Numbers for sizing and ride feel.
| Size | SM | MD | LG | XL |
|---|---|---|---|---|
| Stack Reach Ratio | 1.41 mm | 1.36 mm | 1.31 mm | 1.28 mm |
| Bottom Bracket Height | 342 mm | 342 mm | 342 mm | 342 mm |
| Front Center | 728 mm | 753 mm | 779 mm | 804 mm |
| Rake | 40 mm | 39 mm | 39 mm | 39 mm |
| Trail | 122 mm | 123 mm | 123 mm | 123 mm |
| Stack | 579 mm | 589 mm | 598 mm | 607 mm |
| Reach | 412 mm | 433 mm | 455 mm | 476 mm |
| Top Tube Length | 579 mm | 604 mm | 629 mm | 654 mm |
| Seat Tube Angle | 73.5 ° | 73.5 ° | 73.5 ° | 73.5 ° |
| Seat Tube Length | 394 mm | 432 mm | 483 mm | 533 mm |
| Head Tube Angle | 65 ° | 65 ° | 65 ° | 65 ° |
| Head Tube Length | 100 mm | 110 mm | 120 mm | 130 mm |
| Chainstay Length | 423 mm | 423 mm | 423 mm | 423 mm |
| Wheelbase | 1151 mm | 1176 mm | 1202 mm | 1227 mm |
| Bottom Bracket Drop | 13 mm | 13 mm | 13 mm | 13 mm |
| Standover Height | 745 mm | 739 mm | 743 mm | 759 mm |
| Wheels | 27" | 27" | 27" | 27" |
| Rider Min Height | 158 cm | 168 cm | 178 cm | 186 cm |
| Rider Max Height | 171 cm | 180 cm | 189 cm | 199 cm |
About this model
HARDLINE C1 completes the Jamis Hardline model. Jamis released 29 bikes variations of this model so far. You can easily view all of the Jamis Hardline bikes models from 2023, here.
Model range prices
Jamis HARDLINE A2 2023 is the cheapest bike model and costs 3799$. Jamis HARDLINE C1 2023 is the most expensive one and costs 9499$.
Safety
When you go for a ride, don’t forget to put your helmet on. Moreover, ride with traffic, not against it. This will help you stay visible to drivers and also makes it easier for them to see you.
Enduro bikes average price
According to our calculations, the average cost of an Enduro bike that is reliable is 3599$. However, even though the average price of an Enduro bike is lower, you might still be able to get a top-quality bike. To make sure you don’t pay a higher amount than normal for your bike, always do some components analysis and read reviews.
This bike was released in 2023 and its price was 9499$. Comparing the average cost of an Enduro bike to this one, you will see that HARDLINE C1 price is 163.93% more expensive.
Enduro bikes average weight
Enduro bikes have an average weight of 14.27 kg (31.46 lbs). It is a good advantage to have a lighter bike than the average. However, a heavier bike is more efficient on descents.
With a weight of 13.72 kg (30.25 lbs), Jamis bike is slightly lighter than average. In conclusion, the average Enduro bike weighs 4.01% more than HARDLINE C1.
Internal Cable Routing
It’s also important to mention the internal cable routing that this bike has. In short, this will allow you to keep your bike cables in great condition. Say goodbye to hanging cables.
Overview of components
Fork
The Fox Factory Float 38 is included from the factory. It has a travel distance of 170mm. Bike forks are great for shock absorption and provide you with a smooth ride. In short, you should always ensure you have a good fork when purchasing a bike.
Fork material
The fork on this bike is made out of aluminum, which is a lighter material. However, it is not as tough, nor durable as steel is.
Rear Shock
Rear shocks give you increased comfort, control, and traction, which is important when cornering or braking. This allows you to ride faster on bumpy roads. To sum up, get a full-suspension bike if you want the smoothest rides.
Wheels
As for the wheels, Jamis HARDLINE C1 2023, has a 27.5″ carbon model. The 27.5″ wheels are a great choice for smaller riders. However, these wheels have a slower top speed if you compare them to 29″ wheels.
Brakes
Stopping the bike when needed, it’s essential for your safety. This bike has Hydraulic Disc brakes. These kinds of brakes are among the most popular models used on bikes. To sum up, these are ideal for anyone.
Sizes
There are 4 sizes available for this model. Rider height can be anywhere between 158 cm – 199 cm (5.18 ft – 6.53 ft). In conclusion, it won’t take much to find one that’s right for you.
Dropper post
A dropper post is included with the HARDLINE C1. If you are a technical rider, a dropper post is essential. A dropper post provides increased safety while riding. The lever system, allows you to move your saddle up and down, which is very useful on climbs and descends.
