Bike details
Overview
Key information split into simple groups.
Bike summary
-
-
Frame Aluminum -
Wheels 24" -
Fork Manitou Machete JUNIT -
Suspension Hardtail -
Drivetrain Single Speed -
Brakes Hydraulic Disc
Parts list
Components
Main components, grouped by system.
Bike components
Frame
Frame
6061 Aluminum, BSA BB, Disc Brake Mount, Integrated 1-1/8"-1.5" Taper H/T, 3/8" Horizontal Adjustable Dropout w/ Integrated Chain Tensioners
Suspension Fork
Manitou Machete J-Unit, Air Spring w/ Rebound Adjust, 15mm Thru Axle Dropout, 1-1/8"-1.5" Taper AL Steerer, Pre Load Adjust, Black Stanchions
Drivetrain
Cassette
13T Cog
Crank
GT Power Series 3pc Chromoly 140mm, 19mm x 8T Spindle, GT NBS 28T Alloy Chainwheel
Bottom Bracket
BSA Sealed
Chain
KMC HL1 Wide
Pedals
GT Logo PC Platform
Wheels
Front Hub
Sealed Alloy Disc, 15x110 Boost
Rear Hub
Alloy Disc Body, Sealed Bearings, 32 Hole, 3/8" x 17mm Female Bolt
Rims
Alloy Double Wall, 32h
Spokes
Stainless Steel, 14g
Tires
Front: Kenda Small Block Eight 2.10", Rear: Kenda Small Block Eight 2.10"
Brakes
Brakes
Hydro Disc, 160mm Rotor (F/R)
Brake Levers
Brake Levers Alloy, 2 Finger Hydro
Cockpit
Stem
GT 3D Forged Alloy Stem 35mm, 31.8mm Clamp
Handlebar
GT Alloy Riser Bar, 30mm Rise, 650mm Wide, 5° Up, 9° Back
Grips
GT Super Soft Flanged
Headset
1-1/8-1.5" Taper Sealed Integrated, (45)
Seat
Saddle
GT Pivotal Slim Padded
Seatpost
Alloy Pivotal 27.2 x 200mm
Fit data
Geometry
Numbers for sizing and ride feel.
| Size | One Size |
|---|---|
| Stack Reach Ratio | 1.39 mm |
| Bottom Bracket Height | 290 mm |
| Front Center | 623 mm |
| Rake | 40 mm |
| Trail | 83 mm |
| Stack | 511 mm |
| Reach | 367 mm |
| Top Tube Length | 517 mm |
| Seat Tube Angle | 75.6 ° |
| Seat Tube Length | 290 mm |
| Head Tube Angle | 68.5 ° |
| Head Tube Length | 110 mm |
| Chainstay Length | 345 mm |
| Wheelbase | 978 mm |
| Bottom Bracket Drop | 10 mm |
| Standover Height | 632 mm |
| Wheels | 24" |
| Rider Min Height | 120 cm |
About this model
LaBomba 24 belongs to the Gt Labomba model. GT launched 3 bikes of this model so far. You can easily view all of the Gt Labomba bikes models from 2023, here.
Model range prices
The most economical model, the GT LaBomba Rigid 2023 has a starting price of 1000$. GT LaBomba Pro 2023 on the other hand is the most expensive at 1450$.
Safety
Take safety seriously when you ride your bike, and always wear your helmet. Moreover, don’t ride on the sidewalk. This is actually against the law in some states and can be dangerous for both you and pedestrians.
Average price for Dirt Jump bikes
If you want to purchase a solid Dirt Jump bike, it is important to know that the average cost is 863$. However, even though the average price of a Dirt Jump bike is lower, you might still be able to get a top-quality bike. To make sure you don’t pay a higher amount than normal for your bike, always do some components analysis and read reviews.
Furthermore, this bike was made available in 2023 for 1200$. If we compare this with the average Dirt Jump bike cost we notice that the price is 39.05% more expensive.
Overview of components
Fork
GT LaBomba 24 2023 bike is equipped with the Manitou Machete JUNIT fork, and has mm travel. Bike forks are perfect to absorb shocks and provide a great riding experience overall. In conclusion, always look for a fork with decent travel when you buy a bike.
Fork material
When it comes to the fork, this bike has an aluminum one, which doesn’t add too much extra weight to the bike. However, it is not so stiff as steel or carbon forks are.
Wheels
When it comes to wheels, the LaBomba 24 bike is equipped with the 24″ aluminum model. The 24″ wheels are a good fit for folding bikes, BMX, or children bikes. In conclusion, they are great for flat ground or very easy trails.
Brakes
We ride faster and faster, so a good braking system is essential on a bike nowadays. The LaBomba 24 comes with Hydraulic Disc brakes. With Hydraulic Disc brakes, you’ll be able to stop on a dime, even in wet or icy conditions. To sum up, you can ride your bike with confidence.