YT Industries YT Capra Pro Race 29 2021
Bike details
Key information split into simple groups.
Bike summary
-
-
Frame Carbon
-
Wheels 29"
-
Travel Front 170mm
-
Travel Rear 170mm
-
Fork Fox Factory Float 36
-
Groupset X01 Eagle, Truvativ Descendant Carbon
-
Suspension Full
-
Drivetrain 1 × 12
-
Brakes Hydraulic Disc
Recommended size guide.
MD
164cm - 176cm
LG
173cm - 185cm
XL
182cm - 194cm
XXL
191cm - 202cm
Parts list
Main components, grouped by system.
Bike components
Frame
Suspension Fork
FOX 36 Float Factory, 29“ | 170mm | 15QRx110 | 44mm Rake, Grip2 damper adjustable high and Low-speed compression and rebound, air volumne, air pressure, Kashima Coating
Rear Shock
FOX Float X2 Factory, 230x65mm | w/2-Pos Lever, 2times adjustable Low-speed compression, adjustable High-speed compression, high and Low-speed rebound, air volumne, air pressure, Kashima Coating
Drivetrain
Rear Derailleur
SRAM X01 Eagle, 12-Speed
Shift Levers
SRAM X01 Eagle, 12-Speed
Cassette
SRAM XG1295 Eagle, 10-50T | 12-Speed
Crank
SRAM Descendant Carbon, 170mm | 32T Boost | DUB
Chain Guide
E13 TRS Plus, I05 | 28-34T | Compact Slider
Pedals
included / inklusive The included pedals were not made for demanding trails or racing. That is why we also offer you quality pedals at an attractive price in the shopping cart.
Wheels
Rims
E13 LG1 Race EN Carbon, 29“ x 30mm | 110x15mm | 148x12mm
Tires
E13 LG1 Race, 29“ x 2.4
Brakes
Brakes
SRAM Code RSC, Rotor CENTERLINE 200mm/200mm, Adjustable reach and contact point
Cockpit
Stem
Renthal Apex 35, 50mm
Handlebar
Renthal Fatbar Carbon 35, Black | 30mm Rise | 800mm Width
Grips
ODI Elite Motion V2.1, Lock-On
Headset
Acros AZX-576, High Cap
Seat
Saddle
SDG RADAR MNT, YT Custom
Seatpost
FOX Transfer Factory, 31.6mm | 125mm/150mm/175mm Drop
Fit data
Numbers for sizing and ride feel.
| Size | MD | LG | XL | XXL |
|---|---|---|---|---|
| Stack Reach Ratio | 1.41 mm | 1.37 mm | 1.33 mm | 1.29 mm |
| Bottom Bracket Height | 351 mm | 351 mm | 351 mm | 351 mm |
| Front Center | 769 mm | 793 mm | 817 mm | 840 mm |
| Rake | 46 mm | 46 mm | 46 mm | 46 mm |
| Trail | 124 mm | 124 mm | 124 mm | 124 mm |
| Stack | 624 mm | 633 mm | 642 mm | 647 mm |
| Reach | 443 mm | 463 mm | 483 mm | 503 mm |
| Top Tube Length | 587 mm | 624 mm | 648 mm | 670 mm |
| Seat Tube Angle | 75.5 ° | 75.5 ° | 75.5 ° | 75.5 ° |
| Seat Tube Length | 420 mm | 445 mm | 465 mm | 490 mm |
| Head Tube Angle | 65 ° | 65 ° | 65 ° | 65 ° |
| Head Tube Length | 95 mm | 105 mm | 115 mm | 120 mm |
| Chainstay Length | 438 mm | 438 mm | 443 mm | 443 mm |
| Wheelbase | 1206 mm | 1230 mm | 1259 mm | 1282 mm |
| Bottom Bracket Drop | 25 mm | 25 mm | 25 mm | 25 mm |
| Standover Height | 702 mm | 726 mm | 738 mm | 748 mm |
| Wheels | 29" | 29" | 29" | 29" |
| Rider Min Height | 164 cm | 173 cm | 182 cm | 191 cm |
| Rider Max Height | 176 cm | 185 cm | 194 cm | 202 cm |
About this model
Capra Pro Race 29 is part of the Yt Capra model. YT launched 84 bikes of this model so far. Check out the entire range from 2021 of this model, by clicking this link.
Model range prices
YT Capra Base AL 29 2021 is the most economical model, with a starting price of 2699$. YT Capra Launch Edition MX 2021 on the other hand costs 7999$, and is the most expensive model.
Safety
Take safety seriously when you ride your bike, and always wear your helmet. Moreover, don’t ride on the sidewalk. This is actually against the law in some states and can be dangerous for both you and pedestrians.
Enduro bikes average price
Our math shows that the average cost of a dependable Enduro bike is 3599$. However, you could also get a good Enduro bike even if you pay a lower amount than the average price. As a general rule of thumb, you should always read reviews about the bike and its components before buying it to ensure you don’t pay too much.
Furthermore, this bike was made available in 2021 for 5499$. Comparing this to the average Enduro bike price, we see that the price is 52.79% higher.
Average weight for Enduro bikes
Enduro bikes weigh an average of 14.27 kg (31.46 lbs). A lighter bike will give you some extra advantage when climbing. A heavier bike will have more speed for descents.
With a weight of 14.5 kg (31.97 lbs), YT bike is slightly heavier than average. In conclusion, the average Enduro bike weighs 1.61% less than Capra Pro Race 29.
Overview of components
Fork
The Fox Factory Float 36 is included from the factory. It has a travel distance of 170mm. Bike forks absorb the shocks and give you a smooth and pleasant ride. In short, you should always ensure you have a good fork when purchasing a bike.
Rear Shock
YT Capra Pro Race 29 bike has the FOX Float X2 Factory model installed, and has a travel of 170mm. Rear shocks improve riding comfort and give you greater control over all terrains. In conclusion, to increase your riding experience, get a bike with a rear shock if possible.
Wheels
When leaving the production line, the Capra Pro Race 29 model has 29″ carbon wheels. These wheels are more forgiving when you go over roots, rocks, bumps, or other obstacles you encounter on your ride. However, if you’re not a tall person, you might find it difficult to adapt to this wheel size.
Brakes
When you want to stop the bike in time, the brakes are vital. The Capra Pro Race 29 has Hydraulic Disc brakes. Hydraulic disc brakes are perfect for mountain biking, road cycling, and commuting. To sum up, your safety is in good hands.
Sizes
There are 4 sizes available for this model. Rider height can be anywhere between 164 cm – 202 cm (5.38 ft – 6.63 ft). In conclusion, you won’t have a problem finding one that suits you.
Dropper post
The YT model is also equipped with a dropper post. If used correctly, a dropper post gives you more faith, maneuverability, and greater control over your bike.
