Rocky Mountain Slayer Alloy 30 2021
2021 Mountain
Estimate price |
3,759$
Weight | 17.05 kg 
Bike details
Overview
Key information split into simple groups.
Bike summary
-
-
Frame Aluminum -
Wheels 27.5" / 29" -
Travel Front 180mm -
Travel Rear 180mm -
Fork Marzocchi Bomber Z1
-
Groupset Deore, Race Face -
Suspension Full -
Drivetrain 1 × 12 -
Brakes Hydraulic Disc
Sizing
Recommended size guide.
SM
158cm - 171cm
MD
168cm - 180cm
MD
168cm - 180cm
LG
178cm - 189cm
XL
186cm - 199cm
Parts list
Components
Main components, grouped by system.
Bike components
Frame
Frame
FORM™ Alloy. Full Sealed Cartridge Bearings. Press Fit BB92. Internal Cable Routing. 2-Bolt ISCG05 Tabs. RIDE-4™ Adjustable Geometry + Suspension Rate. 29: 170mm Travel / 27.5: 180mm Travel. FORM™ Alloy Rear Triangle
Suspension Fork
Marzocchi Z1 Float EVOL GRIP. 29: 170mm, 44mm Offset| 27.5: 180mm, 44mm Offset
Rear Shock
Marzocchi Bomber CR | Steel Spring | Sealed Bearing Eyelet | 25x8mm F Hardware | All Sizes = 230x65mm | Size-Specific tune in FAQ
Drivetrain
Rear Derailleur
Shimano Deore 12spd
Shift Levers
Shimano Deore 12spd
Cassette
Shimano Deore 10-51T 12spd
Crank
Race Face Ride Cinch | 27.5 = 34T | 29 = 32T | 24mm Spindle | 170mm Crank Length
Bottom Bracket
Shimano SM-BBMT500
Chain
Shimano M6100
Wheels
Front Hub
Shimano MT410 | 15mm Boost
Rear Hub
Shimano MT410 Boost 148mm | RMB Axle | 163mm x 12mm x 1.5mm
Rims
WTB ST i30 TCS 2.0 Tubeless | Tubeless Ready - Tape | Valves Incl | 32H
Spokes
2.0 Stainless
Tires
F: Maxxis Minion DHF 2.5 WT 3C MaxxGrip DD Tubeless Ready // R: Maxxis Minion DHR II 2.4 WT 3C MaxxGrip DD Tubeless Ready
Brakes
Brakes
Shimano 6120 Trail 4 Piston | Metal Pads | RT64 203mm F Rotor | RT64 203mm R Rotor
Cockpit
Stem
Rocky Mountain 35 AM | 5° Rise | All Sizes = 40m
Handlebar
Rocky Mountain AM | 780mm Width | 27.5 = 38mm Rise | 29 = 25mm Rise | 9° Backsweep | 5° Upsweep | 35mm Clamp
Grips
Ergon GD10 EVO Lock On
Headset
FSA Orbit NO.57E | 36°x45° Bearings | 30.2mm x 41mm x 7.1mm Upper | 40mm x 51.8mm x 7.5mm Lower | 1.5" Crown Race
Seat
Saddle
WTB Volt Race | Cromoly Rails | 142mm Width
Seatpost
Rocky Mountain Toonie Drop Alloy 30.9mm | SM = 125mm | MD - LG = 150mm | XL = 170mm
Fit data
Geometry
Numbers for sizing and ride feel.
| Size | SM | MD | MD | LG | XL |
|---|---|---|---|---|---|
| Stack Reach Ratio | 1.42 mm | 1.35 mm | 1.43 mm | 1.39 mm | 1.33 mm |
| Bottom Bracket Height | 337 mm | 337 mm | 347 mm | 347 mm | 347 mm |
| Front Center | 750 mm | 775 mm | 791 mm | 820 mm | 857 mm |
| Rake | 43 mm | 41 mm | 44 mm | 43 mm | 42 mm |
| Trail | 126 mm | 129 mm | 140 mm | 141 mm | 142 mm |
| Stack | 592 mm | 597 mm | 622 mm | 636 mm | 650 |
| Reach | 416 mm | 441 mm | 436 mm | 459 mm | 490 mm |
| Top Tube Length | 571 mm | 595 mm | 601 mm | 626 mm | 661 mm |
| Seat Tube Angle | 75.4 ° | 75.4 ° | 75.2 ° | 75.2 ° | 75.2 ° |
| Seat Tube Length | 380 mm | 420 mm | 420 mm | 445 mm | 480 mm |
| Head Tube Angle | 63.9 ° | 63.9 ° | 63.2 ° | 63.2 ° | 63.2 ° |
| Head Tube Length | 90 mm | 95 mm | 95 mm | 110 mm | 125 mm |
| Chainstay Length | 428 mm | 428 mm | 440 mm | 440 mm | 440 mm |
| Wheelbase | 1177 mm | 1202 mm | 1230 mm | 1259 mm | 1296 mm |
| Bottom Bracket Drop | 18 mm | 18 mm | 27 mm | 27 mm | 27 mm |
| Standover Height | 803 mm | 803 mm | 829 mm | 829 mm | 829 mm |
| Wheels | 27" | 27" | 29" | 29" | 29" |
| Rider Min Height | 158 cm | 168 cm | 168 cm | 178 cm | 186 cm |
| Rider Max Height | 171 cm | 180 cm | 180 cm | 189 cm | 199 cm |
Model Overview
Slayer Alloy 30 is part of the Rockymountain Slayer model. There are 64 bikes that carry this model name. Check out the entire range from 2021 of this model, by clicking this link.
Model range prices
The most economical model, the Rocky Mountain Slayer Alloy 30 2021 has a starting price of 3759$. Rocky Mountain Slayer Carbon 90 2021 on the other hand is the most expensive at 8359$.
Safety
Your safety should be the top priority when you go for a ride. In short, make sure that you always use a helmet, high visibility clothing, and proper lights when riding at night-time.
Average price for Enduro bikes
Our math shows that the average cost of a dependable Enduro bike is 3599$. However, paying less money than this amount doesn’t mean that you couldn’t get a great Enduro bike. In conclusion, always check bike reviews and their components before making a purchase to make sure you don’t overpay.
This bike was released in 2021 and its price was 3759$. Doing a quick comparison, we notice that Slayer Alloy 30 price is 4.45% higher than the average cost of an Enduro bike.
Enduro bikes average weight
Enduro bikes weigh an average of 14.27 kg (31.46 lbs). Having an easier bike than average will give you a great advantage on climbs. However, a heavier bike will gain more speed on descends.
Weighing 17.05 kg (37.59 lbs), the Slayer Alloy 30 model is much heavier than average. To sum up, it’s 19.48% heavier than the average weight of Enduro bikes.
Internal Cable Routing
This bike has an internal cable routing. As a result, this helps to preserve the bike’s cables. No more cables around your bike.
Slayer Alloy 30 components
Fork
The Slayer Alloy 30 comes factory-installed with the Marzocchi Bomber Z1 fork. This has a travel range of 180mm. Bike forks are perfect to absorb shocks and provide a great riding experience overall. In conclusion, always look for a fork with decent travel when you buy a bike.
Rear Shock
The shock that’s installed on this bike is Marzocchi Bomber CR | Steel Spring, with a travel distance of 180mm. Bike rear shocks increase the riding comfort, and also give you more control over technical trails. To sum up, always consider getting a bike that has a rear shock as well.
Wheels size
The wheels on Slayer Alloy 30 are the 27.5″ aluminum type. These wheels will provide you with more control over the bike. However, these wheels have a slower top speed if you compare them to 29″ wheels.
Brakes
Nothing is more important on a bike than its ability to brake properly. Rocky Mountain Slayer Alloy 30 is equipped with Hydraulic Disc brakes. Hydraulic disc brakes provide amazing stopping power, no matter what the terrain. To sum up, these are ideal for anyone.
Sizes
There are 5 sizes available for this model. Rider height can be anywhere between 158 cm – 199 cm (5.18 ft – 6.53 ft). In short, you can easily find one that suits you.
Dropper post
The Rocky Mountain model is also equipped with a dropper post. A dropper post is a must-have these days if you’re riding anything remotely technical. The main benefit of a dropper post is increased safety while riding. As mentioned above, the lever system allows you to quickly move the saddle out of the way when approaching descents or trail obstacles.