Yeti SB115 — T/Series / T2 2021
2021 Mountain
Estimate price |
7,300$
Weight | 12.52 kg 
Bike details
Overview
Key information split into simple groups.
Bike summary
-
Category -
Frame Carbon -
Wheels 29" -
Travel Front 130mm -
Travel Rear 115mm -
Fork Fox Factory Float 34
-
Groupset X01 Eagle, X1 -
Suspension Full -
Brakes Hydraulic Disc
Sizing
Recommended size guide.
SM
158cm - 171cm
MD
168cm - 180cm
LG
178cm - 189cm
XL
186cm - 199cm
Parts list
Components
Main components, grouped by system.
Bike components
Frame
Frame
TURQ Series carbon fiber frame, Switch Infinity suspension technology, press-fit BB92, internally tunneled cable routing, 148mm x 12mm BOOST dropouts, sealed enduro max pivot bearings, integrated derailleur hanger, and axle.
Suspension Fork
FOX FACTORY 34/130MM
Rear Shock
FOX FACTORY DPS 190 X 45MM
Drivetrain
Rear Derailleur
SRAM X01 EAGLE Upgradable
Shift Levers
SRAM X01 EAGLE Upgradable
Cassette
SRAM X01 EAGLE 1295 10-52
Crank
SRAM X1 EAGLE 30T 170MM
Bottom Bracket
SRAM DUB BB92
Chain
SRAM GX EAGLE
Wheels
Rims
DT SWISS XM1700 30MM Upgradable
Tires
MAXXIS MINION DHF 2.5 EXO
Brakes
Brakes
SRAM G2 RSC
Disk Rotors
SRAM CENTERLINE 180/SRAM CENTERLINE 180
Cockpit
Stem
RACE FACE TURBINE BASIC 35X50MM
Handlebar
YETI CARBON 35X780MM
Grips
ODI ELITE PRO
Headset
CANE CREEK 40 INTEGRATED
Seat
Saddle
SILVERADO CUSTOM
Seatpost
FOX TRANSFER 30.9MM / SM: 125MM, MD: 150MM, LG-XL: 175MM
Fit data
Geometry
Numbers for sizing and ride feel.
| Size | SM | MD | LG | XL |
|---|---|---|---|---|
| Stack Reach Ratio | 1.5 mm | 1.43 mm | 1.4 mm | 1.38 mm |
| Bottom Bracket Height | 339.5 mm | 339.4 mm | 339.3 mm | 339.2 mm |
| Front Center | 688.8 mm | 717.8 mm | 743.9 mm | 771.9 mm |
| Stack | 596 mm | 606.1 mm | 621.2 mm | 641.3 mm |
| Reach | 398.5 mm | 423.6 mm | 443.6 mm | 463.5 mm |
| Top Tube Length | 570.3 mm | 598.7 mm | 623.9 mm | 650.8 mm |
| Seat Tube Angle | 74.1 ° | 74.1 ° | 74 ° | 73.9 ° |
| Seat Tube Length | 393 mm | 419 mm | 457 mm | 495 mm |
| Head Tube Angle | 67.6 ° | 67.6 ° | 67.6 ° | 67.6 ° |
| Head Tube Length | 92.6 mm | 107 mm | 123.2 mm | 144.7 mm |
| Chainstay Length | 429 mm | 429 mm | 429 mm | 429 mm |
| Wheelbase | 1118 mm | 1147 mm | 1173 mm | 1201 mm |
| Bottom Bracket Drop | 35 mm | 35 mm | 35 mm | 35 mm |
| Standover Height | 724 mm | 724 mm | 724 mm | 725 mm |
| Wheels | 29" | 29" | 29" | 29" |
| Rider Min Height | 158 cm | 168 cm | 178 cm | 186 cm |
| Rider Max Height | 171 cm | 180 cm | 189 cm | 199 cm |
About this model
SB115 — T/Series / T2 completes the Yeti Sb115 model. There are 20 bikes that carry this model name. You can get a glimpse at all models from 2021, by clicking on this link.
Model range prices
Yeti SB115 — C/Series / C1 2021 is the most affordable bike of this model and has a price of 5100$. On the other hand, Yeti SB115 — SE 2021, is the most expensive and costs 8600$.
Safety
When you go for a ride, don’t forget to put your helmet on. Moreover, ride with traffic, not against it. This will help you stay visible to drivers and also makes it easier for them to see you.
Average price for Crosscountry bikes
According to our calculations, the average cost of a Crosscountry bike that is reliable is 1905$. However, paying less money than this amount doesn’t mean that you couldn’t get a great Crosscountry bike. To sum up, when you purchase your bike, make sure to check if it has reviews, and also do some components research.
This bike was released in 2021 and its price was 7300$. Comparing the average cost of a Crosscountry bike to this one, you will see that SB115 — T/Series / T2 price is 283.2% more expensive.
Average weight for Crosscountry bikes
If we make a quick analysis of the average weight of a Crosscountry bike, we get 12.4 kg (27.34 lbs). You will have a greater advantage on climbs if your bike is easier than the average. On descents, however, a heavier bike will give you extra speed.
Weighing 12.52 kg (27.6 lbs), the SB115 — T/Series / T2 model is slightly heavier than average. In short, the average Crosscountry bike weight is 0.97% lower than this one.
Internal Cable Routing
It’s also important to mention the internal cable routing that this bike has. In short, this will allow you to keep your bike cables in great condition. Say goodbye to hanging cables.
SB115 — T/Series / T2 components
Fork
This bike has the Fox Factory Float 34 fork installed. The fork’s travel is 130mm. Bike forks are perfect to absorb shocks and provide a great riding experience overall. To sum up, when buying a bicycle, make sure you get a fork that is capable of delivering decent travel.
Rear Shock
As for the rear shock, this bike has the FOX FACTORY DPS 190 X 45MM model, with a travel of 115mm. Bike rear shocks increase the riding comfort, and also give you more control over technical trails. In short, if you want smooth rides, get a full-suspension bicycle.
Wheels
When leaving the production line, the SB115 — T/Series / T2 model has 29″ aluminum wheels. These wheels are more forgiving when you go over roots, rocks, bumps, or other obstacles you encounter on your ride. However, if you’re not a tall person, you might find it difficult to adapt to this wheel size.
Brakes
For your safety, it is important to have quality breaks on your bike. Yeti SB115 — T/Series / T2 has Hydraulic Disc brakes installed. With Hydraulic Disc brakes, you’ll be able to stop on a dime, even in wet or icy conditions. To sum up, your safety is in good hands.
Sizes
This bike is available in 4 sizes. They vary from 158 cm – 199 cm (5.18 ft – 6.53 ft). In conclusion, finding one for you shouldn’t be a problem.
Dropper post
Every bike should have a dropper post, and this one does. A dropper post is a must-have these days if you’re riding anything remotely technical. The main benefit of a dropper post is increased safety while riding. As mentioned above, the lever system allows you to quickly move the saddle out of the way when approaching descents or trail obstacles.