Yeti SB150 — T/Series Frameset 2021
2021 Mountain
Estimate price |
4,200$
Weight | 3.5 kg 
Bike details
Overview
Key information split into simple groups.
Frame summary
-
-
Frame Carbon -
Wheels 29" -
Travel Rear 150mm -
Suspension Full
Sizing
Recommended size guide.
SM
158cm - 171cm
MD
168cm - 180cm
LG
178cm - 189cm
XL
186cm - 199cm
Parts list
Components
Main components, grouped by system.
Bike components
Frame
Frame
TURQ Series carbon fiber frame, Switch Infinity suspension technology, press-fit BB92, internally tunneled cable routing, 148mm x 12mm BOOST dropouts, sealed enduro max pivot bearings, integrated derailleur hanger, and axle.
Rear Shock
FOX FACTORY X2 230 X 60MM
Drivetrain
Bottom Bracket
BB86/BB92, press-fit
Fit data
Geometry
Numbers for sizing and ride feel.
| Size | SM | MD | LG | XL |
|---|---|---|---|---|
| Stack Reach Ratio | 1.43 mm | 1.34 mm | 1.3 mm | 1.26 mm |
| Bottom Bracket Height | 347.8 mm | 347.8 mm | 347.9 mm | 347.9 mm |
| Front Center | 759.5 mm | 790.2 mm | 815 mm | 844.7 mm |
| Stack | 610.4 mm | 611.8 mm | 621.8 mm | 631.8 mm |
| Reach | 427.2 mm | 457.2 mm | 477.2 mm | 502.2 mm |
| Top Tube Length | 568.9 mm | 599.4 mm | 622.6 mm | 650.9 mm |
| Seat Tube Angle | 77 ° | 77 ° | 76.9 ° | 76.8 ° |
| Seat Tube Length | 380 mm | 410 mm | 450 mm | 495 mm |
| Head Tube Angle | 64.5 ° | 64.5 ° | 64.5 ° | 64.5 ° |
| Head Tube Length | 95 mm | 96.6 mm | 107.7 mm | 118.8 mm |
| Chainstay Length | 430 mm | 430 mm | 430 mm | 430 mm |
| Wheelbase | 1189 mm | 1220 mm | 1245 mm | 1274 mm |
| Bottom Bracket Drop | 27 mm | 27 mm | 27 mm | 27 mm |
| Standover Height | 717 mm | 724 mm | 737 mm | 758 mm |
| Wheels | 29" | 29" | 29" | 29" |
| Rider Min Height | 158 cm | 168 cm | 178 cm | 186 cm |
| Rider Max Height | 171 cm | 180 cm | 189 cm | 199 cm |
About this model
SB150 — T/Series Frameset completes the Yeti Sb150 model. 32 frames variations carry this model name so far. You can easily view all of the Yeti Sb150 frames models from 2021, here.
Safety
When you go for a ride, don’t forget to put your helmet on. Moreover, ride with traffic, not against it. This will help you stay visible to drivers and also makes it easier for them to see you.
Enduro frames average price
If you want an acceptable Enduro frame you should know that the average price is 1895$. However, you could also get a good Enduro frame even if you pay a lower amount than the average price. In short, before purchasing your ideal frame do some research about its components, and also check for reviews online.
When Yeti released this model in 2021, its price was 4200$. Comparing the average cost of an Enduro frame to this one, you will see that SB150 — T/Series Frameset price is 121.64% more expensive.
Enduro frames average weight
The average weight for Enduro frames is 3.43 kg (7.56 lbs). A lighter bike will give you some extra advantage when climbing. A heavier bike will have more speed for descents.
Yeti SB150 — T/Series Frameset it’s weighing 3.5 kg (7.72 lbs). At this weight, is slightly heavier than average. In short, the average Enduro frame weight is 2.04% lower than this one.
Internal Cable Routing
Moreover, this bike comes with internal cable routing allowing you to keep the cables in a good condition. It also makes it look more professional.
SB150 — T/Series Frameset components
Rear Shock
Yeti SB150 — T/Series Frameset frame has the FOX FACTORY X2 230 X 60MM model installed, and has a travel of 150mm. Rear shocks give you increased comfort, control, and traction, which is important when cornering or braking. This allows you to ride faster on bumpy roads. To sum up, get a full-suspension bike if you want the smoothest rides.
Sizes
There are 4 sizes available for this model. Rider height can be anywhere between 158 cm – 199 cm (5.18 ft – 6.53 ft). In conclusion, it won’t take much to find one that’s right for you.