Haibike XDURO NDURO 10.0 2020
Bike details
Key information split into simple groups.
Bike summary
-
-
Frame Carbon
-
Wheels 27.5"
-
Travel Front 180mm
-
Travel Rear 180mm
-
Fork Fox Factory Float 36
-
Groupset EX1
-
Suspension Full
-
Motor 120Nm mid-drive
-
Battery Flyon, The Battery, 630 Wh
-
Drivetrain 1 × 8
-
Brakes Hydraulic Disc
Recommended size guide.
SM
158cm - 171cm
MD
168cm - 180cm
LG
178cm - 189cm
XL
186cm - 199cm
Parts list
Main components, grouped by system.
Bike components
Frame
Frame
Haibike, XDURO NDURO, Carbon/aluminium, Thru-axle M12 (1.75) x 148mm, Disc brake Post Mount, Travel= 180 mm
Suspension Fork
FOX, 36 Float Factory, Air, Travel= 180 mm, Aluminium steerer tube 1 1/8" - 1 1/2" tapered, 15 x 100mm thru-axle
Drivetrain
Rear Derailleur
SRAM, EX1
Shift Levers
SRAM, EX1, Trigger switch, 8 speed
Cassette
SRAM, XG899, 11 - 48 teeth
Crank
Haibike Components, Aluminium, 38 teeth
Bottom Bracket
integrated in the motor
Chain
SRAM, EX1
Pedals
Haibike, Freeride pedal, Aluminium
Wheels
Rims
DT Swiss, FR1950
Tires
Schwalbe, Magic Mary, 65-584, 27.5" x 2.60"
Brakes
Brake Levers
Magura, MT7 HC-lever, Aluminium
Cockpit
Stem
Haibike Components, TheStem 2, A-head, Bar bore: 31.8 mm
Handlebar
Haibike Components, The Bar +++, 780 mm
Grips
Haibike, MTB grips
Headset
Feimin, A-Head Tapered, Aluminium, cartridge bearing
Seat
Saddle
Prologo, PROXIM TiroX
Seatpost
Kind Shock, LEV-Integra, Telescope, 34.9 mm, Aluminium
Motor & Battery
Motor
Flyon, HPR120S, 25 km/h, 120 Nm
Battery
Flyon, The Battery, 630 Wh
Remote
Flyon, The Display
Fit data
Numbers for sizing and ride feel.
| Size | SM | MD | LG | XL |
|---|---|---|---|---|
| Stack Reach Ratio | 1.442 mm | 1.344 mm | 1.31 mm | 1.231 mm |
| Bottom Bracket Height | 350 mm | 350 mm | 350 mm | 350 mm |
| Front Center | 756 mm | 786 mm | 820 mm | 850 mm |
| Rake | 51 mm | 51 mm | 51 mm | 51 mm |
| Trail | 117 mm | 117 mm | 117 mm | 117 mm |
| Stack | 594 mm | 594 mm | 612 mm | 612 mm |
| Reach | 412 mm | 442 mm | 467 mm | 497 mm |
| Top Tube Length | 570 mm | 600 mm | 630 mm | 660 mm |
| Seat Tube Angle | 74 ° | 74 ° | 74 ° | 74 ° |
| Head Tube Angle | 64 ° | 64 ° | 64 ° | 64 ° |
| Head Tube Length | 110 mm | 110 mm | 130 mm | 130 mm |
| Chainstay Length | 470 mm | 470 mm | 470 mm | 470 mm |
| Wheelbase | 1226 mm | 1256 mm | 1290 mm | 1320 mm |
| Bottom Bracket Drop | 5 mm | 5 mm | 5 mm | 5 mm |
| Standover Height | 820 mm | 820 mm | 830 mm | 840 mm |
| Wheels | 27" | 27" | 27" | 27" |
| Rider Min Height | 158 cm | 168 cm | 178 cm | 186 cm |
| Rider Max Height | 171 cm | 180 cm | 189 cm | 199 cm |
About this model
XDURO NDURO 10.0 completes the Haibike E Xduro model. Haibike launched 44 e-bikes of this model so far. Take a sneak peek at all Haibike E Xduro e-bikes models from 2020, by clicking here.
Model range prices
Haibike XDURO FatSix 8.0 2020 is the most affordable e-bike of this model and has a price of 3715$. On the other hand, Haibike XDURO AllMtn 10.0 2020, is the most expensive and costs 9555$.
Safety
Take safety seriously when you ride your bike, and always wear your helmet. Moreover, don’t ride on the sidewalk. This is actually against the law in some states and can be dangerous for both you and pedestrians.
Average price for Enduro e-bikes
According to our calculations, the average cost of an Enduro e-bike that is reliable is 4785$. However, you could also get a good Enduro e-bike even if you pay a lower amount than the average price. To sum up, when you purchase your e-bike, make sure to check if it has reviews, and also do some components research.
Furthermore, if we have a quick look at this model’s cost, we can see that at its release date the price was 9555$. Comparing this to the average Enduro e-bike price, we see that the price is 99.69% higher.
Average weight for Enduro e-bikes
If we make a quick analysis of the average weight of an Enduro e-bike, we get 23.42 kg (51.63 lbs). A lighter bike will give you some extra advantage when climbing. A heavier bike will have more speed for descents.
Haibike XDURO NDURO 10.0 it’s weighing 28 kg (61.73 lbs). At this weight, is much heavier than average. In conclusion, the average Enduro e-bike weighs 19.56% less than XDURO NDURO 10.0.
XDURO NDURO 10.0 components
Fork
This e-bike has the Fox Factory Float 36 fork installed. The fork’s travel is 180mm. Bike forks are good shock absorbers and provide a smooth ride and a great experience. In conclusion, always look for a fork with decent travel when you buy a bike.
Fork material
The fork is made out of aluminum, so there won’t be much extra weight added to the e-bike. However, they are not so stiff as carbon forks are.
Rear Shock
Bike rear shocks increase the riding comfort, and also give you more control over technical trails. In conclusion, to increase your riding experience, get a bike with a rear shock if possible.
Wheels
The wheels on XDURO NDURO 10.0 are the 27.5″ aluminum type. 27.5″ wheels will reach higher speeds than smaller-sized wheels. However, these wheels have a slower top speed if you compare them to 29″ wheels.
Brakes
For your safety, it is important to have quality breaks on your bike. Haibike XDURO NDURO 10.0 has Hydraulic Disc brakes installed. With Hydraulic Disc brakes, you’ll be able to stop on a dime, even in wet or icy conditions. To sum up, you can ride your bike with confidence.
Sizes
There are 4 sizes available for this model. Rider height can be anywhere between 158 cm – 199 cm (5.18 ft – 6.53 ft). In conclusion, you won’t have a problem finding one that suits you.
Dropper post
Every bike should have a dropper post, and this one does. Therefore, climbing or descending will be a breeze.
