Haro Thread Slope 2020
2020 Mountain
Estimate price |
2,699$
Weight | 13.02 kg 
Bike details
Overview
Key information split into simple groups.
Bike summary
-
-
Frame Aluminum -
Wheels 26" -
Travel Front 100mm -
Fork Manitou Circus Expert
-
Groupset FSA -
Suspension Full -
Drivetrain Single Speed -
Brakes Mechanical Disc
Parts list
Components
Main components, grouped by system.
Bike components
Frame
Frame
Haro Full X6 Alloy Thread Slope, dual suspension frame w/ internal head tube, Euro BB shell & ISCG Mount
Suspension Fork
Manitou Circus Expert, 100mm travel, tapered steerer tube w/ 20mm thru-axle
Rear Shock
Rockshox RS Deluxe R, 190X45 Debonair, 2 Tokens, MM Tune
Drivetrain
Cassette
14T Chromoly Cog
Crank
FSA Gradient Modular 1X Direct Mount, 170mm, Megatooth 30t Forged Alloy Chainring
Bottom Bracket
FSA BB-392-EVO, sealed bearings
Chain
KMC Z1 HX 1/2" X 1/8"
Pedals
Haro SD Nylon w/ sealed bearings
Wheels
Front Hub
Pivit sealed bearing alloy disc, singlespeed cassette w/ 20mm front thru axle, 32h
Rear Hub
Pivit sealed bearing alloy disc, singlespeed cassette w/ 20mm front thru axle, 32h
Rims
Spank Ind. Spoon alloy doublewall, 32h
Tires
Kenda Small Block 8 26x2.35" Front & 26"x2.10" Rear, 60 TPI
Brakes
Brakes
TRP HY/RD-C 160, Cable / Hydraulic Disc Brake for IS Rear Mount, 160mm disc
Brake Levers
Odyssey Trigger for Single Gyro upper cable
Cockpit
Stem
FSA Gradient 1-1/8", 45mm Ext.
Handlebar
FSA Gradient Riser, 25mm Rise, 9 Deg. Backsweep, 6 deg. Upsweep; 31.8mm Clamp
Headset
FSA # 57, 1-1/8"-1.5" Alloy, w/ top & lower AC Bearings
Seat
Saddle
Haro Pivotal w/ hollow bolt
Seatpost
Alloy 31.6mm, Pivotal
Fit data
Geometry
Numbers for sizing and ride feel.
| Size | Thread Slo |
|---|---|
| Stack Reach Ratio | 1.3 mm |
| Bottom Bracket Height | 337 mm |
| Front Center | 668 mm |
| Rake | 41 mm |
| Trail | 92 mm |
| Stack | 553 mm |
| Reach | 425 mm |
| Top Tube Length | 579 mm |
| Seat Tube Angle | 67 ° |
| Seat Tube Length | 320 mm |
| Head Tube Angle | 69 ° |
| Head Tube Length | 115 mm |
| Chainstay Length | 395 mm |
| Wheelbase | 1063 mm |
| Bottom Bracket Drop | 6 mm |
| Standover Height | 715 mm |
| Wheels | 26" |
| Rider Min Height | 120 cm |
About this model
Thread Slope completes the Haro Thread model. There are 9 bikes that carry this model name. You can easily view all of the Haro Thread bikes models from 2020, here.
Model range prices
Haro Thread One 2020 is the most affordable bike of this model and has a price of 1249$. On the other hand, Haro Thread Slope 2020, is the most expensive and costs 2699$.
Safety
When cycling always take safety very seriously. Wear a helmet, obey the traffic rules and wear hi-vis clothes. In short, take care of yourself so others can take care of you.
Average price for Dirt Jump bikes
If you want to purchase a solid Dirt Jump bike, it is important to know that the average cost is 863$. However, even though the average price of a Dirt Jump bike is lower, you might still be able to get a top-quality bike. In conclusion, always check bike reviews and their components before making a purchase to make sure you don’t overpay.
Furthermore, this bike was made available in 2020 for 2699$. In conclusion, this bike price is 212.75% higher than the price of the average Dirt Jump bike.
Dirt Jump bikes average weight
The average weight for Dirt Jump bikes is 12.37 kg (27.27 lbs). You will have a greater advantage on climbs if your bike is easier than the average. On descents, however, a heavier bike will give you extra speed.
Haro Thread Slope it’s weighing 13.02 kg (28.7 lbs). At this weight, is a bit heavier than average. In short, the average Dirt Jump bike weight is 5.25% lower than this one.
Internal Cable Routing
It’s also important to mention the internal cable routing that this bike has. In short, this will allow you to keep your bike cables in great condition. Say goodbye to hanging cables.
Thread Slope components
Fork
This bike has the Manitou Circus Expert fork installed. The fork’s travel is 100mm. Bike forks absorb the shocks and give you a smooth and pleasant ride. In short, you should always ensure you have a good fork when purchasing a bike.
Wheels
When leaving the production line, the Thread Slope model has 26″ aluminum wheels. Being a little smaller, these wheels will fit both small and tall riders. However, they provide less traction than 29″ wheels do.
Brakes
We ride faster and faster, so a good braking system is essential on a bike nowadays. The Thread Slope comes with Mechanical Disc brakes. They deliver good performance and cost less than hydraulic disk brakes. However, with hydraulic disk brakes, you have the ultimate braking power!