Haro Steel Reserve 1.1 2020
2020 Mountain
Estimate price |
629$
Weight | 13.2 kg 
Bike details
Overview
Key information split into simple groups.
Bike summary
-
-
Frame Steel -
Wheels 26" -
Suspension Rigid -
Drivetrain Single Speed -
Brakes Mechanical Disc
Parts list
Components
Main components, grouped by system.
Bike components
Frame
Frame
Haro full Chromoly Steel Reserve frame w/ internal head tube & Euro BB shell
Suspension Fork
Suspension Corrected Rigid Chromoly w/ Disc Brake Tabs
Drivetrain
Cassette
14T Chromoly Cog
Crank
Haro Chromoly 8 Spline 3-pc 28t
Bottom Bracket
4 x Sealed bearing
Chain
KMC S1 1/2" X 1/8"
Pedals
Wellgo Platform alloy w/ Replaceable Pins
Wheels
Front Hub
Pivit alloy disc singlespeed cassette 36h
Rear Hub
Pivit alloy disc singlespeed cassette 36h
Rims
Weinmann XM260 alloy double wall, 36h
Tires
Kenda K-Rad 26 x 2.3"
Brakes
Brakes
Tektro Aries MD-M280
Brake Levers
Tektro ML-520-RS
Cockpit
Stem
Haro front load alloy 1-1/8"
Handlebar
Haro Steel 65mm riser bar, 730mm wide, 6 Deg. back sweep
Headset
VP-A46ACM, 1-1/8" Alloy, 45°X45° Semi-Cartridge Bearings
Seat
Saddle
Haro Padded Slim one piece seat/post
Seatpost
Alloy 25.4mm included w/ seat
Fit data
Geometry
Numbers for sizing and ride feel.
| Size | Long |
|---|---|
| Stack Reach Ratio | 1.4 mm |
| Bottom Bracket Height | 325 mm |
| Front Center | 649 mm |
| Rake | 40 mm |
| Trail | 89 mm |
| Stack | 561 mm |
| Reach | 402 mm |
| Top Tube Length | 583 mm |
| Seat Tube Angle | 70 ° |
| Seat Tube Length | 285 mm |
| Head Tube Angle | 69 ° |
| Head Tube Length | 117 mm |
| Chainstay Length | 403 mm |
| Wheelbase | 1051 mm |
| Bottom Bracket Drop | 17 mm |
| Standover Height | 683 mm |
| Wheels | 26" |
| Rider Min Height | 120 cm |
About this model
Steel Reserve 1.1 is part of the Haro Steel model. Haro released 12 bikes variations of this model so far. You can get a glimpse at all models from 2020, by clicking on this link.
Model range prices
Haro Steel Reserve 1.1 2020 is the cheapest bike model and costs 629$. Haro Steel Reserve 1.2 2020 is the most expensive one and costs 949$.
Safety
When you go for a ride, don’t forget to put your helmet on. Moreover, ride with traffic, not against it. This will help you stay visible to drivers and also makes it easier for them to see you.
Average price for Dirt Jump bikes
Our math shows that the average cost of a dependable Dirt Jump bike is 863$. However, even though the average price of a Dirt Jump bike is lower, you might still be able to get a top-quality bike. To make sure you don’t pay a higher amount than normal for your bike, always do some components analysis and read reviews.
This bike was released in 2020 and its price was 629$. Comparing the average cost of a Dirt Jump bike to this one, you will see that Steel Reserve 1.1 price is 37.2% lower.
Average weight for Dirt Jump bikes
Dirt Jump bikes have an average weight of 12.37 kg (27.27 lbs). An easier bike will give you a big advantage in climbs. However, a heavier bike can gain speed when you descend.
a bit heavier than average, Steel Reserve 1.1 has a weight of 13.2 kg (29.1 lbs). In other words, this model is 6.71% heavier than the average Dirt Jump bike.
Internal Cable Routing
Moreover, this bike comes with internal cable routing allowing you to keep the cables in a good condition. It also makes it look more professional.
Steel Reserve 1.1 components
Fork material
The fork on this bike is made out of steel, which tends to be more flexible than carbon forks in general. However, a carbon fork is considerably lighter.
Wheels
When leaving the production line, the Steel Reserve 1.1 model has 26″ aluminum wheels. The 26″ wheels are lighter than the 27.5 or 29″ wheels. However, they are less forgiving when riding over obstacles such as bumps and roots.
Brakes
Stopping the bike when needed, it’s essential for your safety. This bike has Mechanical Disc brakes. They are much easier to maintain than hydraulic disk brakes. However, performance-wise there is room for improvement.