Specialized S-Works Turbo Creo SL 2020
Bike details
Key information split into simple groups.
Bike summary
-
-
Frame Carbon
-
Wheels 700c
-
Groupset XTR Di2, Dura-Ace Di2
-
Suspension Rigid
-
Motor Specialized 240W 35Nm mid-drive
-
Battery Specialized SL1-320, fully integrated, 320Wh
-
Drivetrain 1 × 11 Electronic
-
Brakes Hydraulic Disc
Parts list
Main components, grouped by system.
Bike components
Frame
Frame
FACT 11r carbon, Open Road Geometry, front/rear thru-axles, fully integrated down tube battery, internal cable routing, fender/rack mounts, Boost™ 12x148mm
Suspension Fork
Future Shock 2.0 w/ Smooth Boot, Boost™ 12x110mm thru-axle, flat-mount disc
Drivetrain
Rear Derailleur
Shimano XTR M9050 Di2, Shadow Plus, GS cage, 11-speed
Shift Levers
Shimano Dura-Ace Di2 Disc R9170
Cassette
Shimano XT, 11-speed, 11-42t
Crank
Praxis, Carbon M30, custom offset, 40T
Chain
Shimano Dura-Ace
Wheels
Rims
Front: Roval CLX 50 Disc, carbon, tubeless-ready, Win Tunnel Engineered, 50mm depth, CeramicSpeed bearings, 21h, Rear: Roval CLX 50 Disc, carbon, tubeless-ready, Win Tunnel Engineered, 50mm depth, DT Swiss 240 internals, CeramicSpeed bearings, 24h
Tires
Front: S-Works Turbo, 700x28mm, Rear: S-Works Turbo, 700x28mm
Brakes
Brakes
Shimano Dura-Ace 9170, Hydraulic disc
Cockpit
Stem
S-Works Future Stem w/ Integrated Computer mount
Handlebar
S-Works Carbon Hover Drop 125mm, Reach 75mm, w/Di2 hole
Seat
Saddle
S-Works Power, carbon rails, carbon base, synthetic leather
Seatpost
S-Works FACT carbon 27.2mm, 20mm offset
Motor & Battery
Motor
Specialized SL 1.1, custom lightweight motor
Battery
Specialized SL1-320, fully integrated, 320Wh
Charger
Custom charger, 48V System w/ SL system charger plug
Fit data
Numbers for sizing and ride feel.
| Size | SM | MD | LG | XL | XXL |
|---|---|---|---|---|---|
| Stack Reach Ratio | 1.55 mm | 1.57 mm | 1.61 mm | 1.65 mm | 1.7 mm |
| Bottom Bracket Height | 264.5 mm | 267 mm | 267 mm | 269.5 mm | 269.5 mm |
| Front Center | 592 mm | 598 mm | 605 mm | 621 mm | 636 mm |
| Rake | 50 mm | 50 mm | 50 mm | 50 mm | 50 mm |
| Trail | 60 mm | 56 mm | 53 mm | 53 mm | 52 mm |
| Stack | 571.5 mm | 588.5 mm | 611.5 mm | 639.5 mm | 671.5 mm |
| Reach | 369.5 mm | 375.5 mm | 380.5 mm | 387.5 mm | 395.5 mm |
| Top Tube Length | 535.5 mm | 544.5 mm | 562.5 mm | 577.5 mm | 601.5 mm |
| Seat Tube Angle | 74 ° | 74 ° | 73.5 ° | 73.5 ° | 73 ° |
| Seat Tube Length | 447.5 mm | 477.5 mm | 502.5 mm | 527.5 mm | 557.5 mm |
| Head Tube Angle | 72 ° | 72.5 ° | 73 ° | 73 ° | 73 ° |
| Head Tube Length | 145.5 mm | 163.5 mm | 185.5 mm | 217 mm | 250 mm |
| Chainstay Length | 422 mm | 422 mm | 423 mm | 423 mm | 424 mm |
| Wheelbase | 1001 mm | 1008 mm | 1016 mm | 1032 mm | 1048 mm |
| Bottom Bracket Drop | 80 mm | 78 mm | 78 mm | 75 mm | 75 mm |
| Standover Height | 727 mm | 755 mm | 778 mm | 806 mm | 836 mm |
| Wheels | 700 | 700 | 700 | 700 | 700 |
Model Overview
S-Works Turbo Creo SL completes the Specialized E Turbo Creo model. 26 e-bikes variations carry this model name so far. Check out the entire range from 2020 of this model, by clicking this link.
Model range prices
The most economical model, the Specialized Turbo Creo SL Comp E5 2020 has a starting price of 5000$. Specialized S-Works Turbo Creo SL – Founder’s Edition 2020 on the other hand is the most expensive at 16500$.
Safety
Take safety seriously when you ride your bike, and always wear your helmet. Moreover, don’t ride on the sidewalk. This is actually against the law in some states and can be dangerous for both you and pedestrians.
Average price for Endurance e-bikes
According to our calculations, the average cost of an Endurance e-bike that is reliable is 3800$. However, you could also get a good Endurance e-bike even if you pay a lower amount than the average price. As a general rule of thumb, you should always read reviews about the e-bike and its components before buying it to ensure you don’t pay too much.
This e-bike was released in 2020 and its price was 13500$. In conclusion, this e-bike price is 255.26% higher than the price of the average Endurance e-bike.
Internal Cable Routing
This bike has an internal cable routing. As a result, this helps to preserve the bike’s cables. No more cables around your bike.
Overview of components
Fork material
S-Works Turbo Creo SL has a carbon fork, so, it won’t add up to much weight to your e-bike. However, the price you have to pay for a carbon fork is considerably higher.
Wheels size
When leaving the production line, the S-Works Turbo Creo SL model has 700c carbon wheels. There is no doubt, that 700c wheels are very popular on all road bike models. However, these wheels don’t perform so well when passing over obstacles.
Brakes
When you want to stop the bike in time, the brakes are vital. The S-Works Turbo Creo SL has Hydraulic Disc brakes. Hydraulic disc brakes provide amazing stopping power, no matter what the terrain. To sum up, you can ride your bike with confidence.
