Yeti SB100 — C/Series / C1 2020
2020 Mountain
Estimate price |
5,099$
Weight | 13 kg 
Bike details
Overview
Key information split into simple groups.
Bike summary
-
Category -
Frame Carbon -
Wheels 29" -
Travel Front 120mm -
Travel Rear 100mm -
Fork Fox Performance Float 34
-
Groupset GX Eagle -
Suspension Full -
Brakes Hydraulic Disc
Sizing
Recommended size guide.
SM
158cm - 171cm
MD
168cm - 180cm
LG
178cm - 189cm
XL
186cm - 199cm
Parts list
Components
Main components, grouped by system.
Bike components
Frame
Frame
C/Series carbon fiber frame, Switch Infinity suspension technology, press-fit BB92, internally tunneled cable routing, 148mm x 12mm BOOST dropouts, sealed enduro max pivot bearings, integrated derailleur hanger, and axle.
Suspension Fork
FOX PERFORMANCE 34/120MM SC
Rear Shock
FOX PERFORMANCE DPS 190 X 37.5MM
Drivetrain
Rear Derailleur
SRAM GX EAGLE
Shift Levers
SRAM GX EAGLE
Cassette
SRAM GX EAGLE 1275 10-50
Crank
SRAM GX EAGLE 30T SM: 170MM, MD-XL: 175MM
Bottom Bracket
SRAM DUB BB92
Chain
SRAM GX EAGLE
Wheels
Rims
DT SWISS M1900 25MM
Tires
MAXXIS MINION DHF 2.3 EXO
Brakes
Brakes
SRAM GUIDE R
Disk Rotors
SRAM CENTERLINE 180/160
Cockpit
Stem
RACE FACE RIDE 35X50MM
Handlebar
RACE FACE AEFFECT R 35X760MM
Grips
ODI ELITE PRO
Headset
CANE CREEK 40 INTEGRATED
Seat
Saddle
WTB VOLT CUSTOM
Seatpost
FOX TRANSFER 30.9MM / SM: 125MM, MD-LG: 150MM, XL: 175MM
Fit data
Geometry
Numbers for sizing and ride feel.
| Size | SM | MD | LG | XL |
|---|---|---|---|---|
| Stack Reach Ratio | 1.49 mm | 1.42 mm | 1.39 mm | 1.38 mm |
| Bottom Bracket Height | 332.1 mm | 332.1 mm | 332 mm | 332 mm |
| Front Center | 985.2 mm | 714.2 mm | 740.2 mm | 768.3 mm |
| Stack | 595 mm | 605.1 mm | 620.1 mm | 640.2 mm |
| Reach | 400.1 mm | 425.1 mm | 445.1 mm | 465.1 mm |
| Top Tube Length | 569.7 mm | 598.2 mm | 623.3 mm | 650.2 mm |
| Seat Tube Angle | 74.3 ° | 74.2 ° | 74.1 ° | 74 ° |
| Seat Tube Length | 393 mm | 419 mm | 457 mm | 495 mm |
| Head Tube Angle | 67.8 ° | 67.8 ° | 67.8 ° | 67.8 ° |
| Head Tube Length | 96.2 mm | 107 mm | 123.2 mm | 144.7 mm |
| Chainstay Length | 430 mm | 430 mm | 430 mm | 430 mm |
| Wheelbase | 1115 mm | 1144 mm | 1170 mm | 1198 mm |
| Bottom Bracket Drop | 42 mm | 42 mm | 42 mm | 42 mm |
| Standover Height | 717 mm | 717 mm | 717 mm | 717 mm |
| Wheels | 29" | 29" | 29" | 29" |
| Rider Min Height | 158 cm | 168 cm | 178 cm | 186 cm |
| Rider Max Height | 171 cm | 180 cm | 189 cm | 199 cm |
Model Overview
SB100 — C/Series / C1 completes the Yeti Sb100 model. 24 bikes variations carry this model name so far. Check out the entire range from 2020 of this model, by clicking this link.
Model range prices
Yeti SB100 Beti — C/Series / GX 2020 is the cheapest bike model and costs 4999$. Yeti SB100 Beti — T/Series / XX1 2020 is the most expensive one and costs 8999$.
Safety
Take safety seriously when you ride your bike, and always wear your helmet. Moreover, don’t ride on the sidewalk. This is actually against the law in some states and can be dangerous for both you and pedestrians.
Crosscountry bikes average price
If you want an acceptable Crosscountry bike you should know that the average price is 1905$. However, even though the average price of a Crosscountry bike is lower, you might still be able to get a top-quality bike. To sum up, when you purchase your bike, make sure to check if it has reviews, and also do some components research.
This bike was released in 2020 and its price was 5099$. Comparing the average cost of a Crosscountry bike to this one, you will see that SB100 — C/Series / C1 price is 167.66% higher.
Average weight for Crosscountry bikes
If we make a quick analysis of the average weight of a Crosscountry bike, we get 12.4 kg (27.34 lbs). Having an easier bike than average will give you a great advantage on climbs. However, a heavier bike will gain more speed on descends.
slightly heavier than average, SB100 — C/Series / C1 has a weight of 13 kg (28.66 lbs). In conclusion, the average Crosscountry bike weighs 4.84% less than SB100 — C/Series / C1.
Internal Cable Routing
It’s also important to mention the internal cable routing that this bike has. In short, this will allow you to keep your bike cables in great condition. Say goodbye to hanging cables.
SB100 — C/Series / C1 components
Fork
This bike has the Fox Performance Float 34 fork installed. The fork’s travel is 120mm. Bike forks are great for shock absorption and provide you with a smooth ride. To sum it all, when buying a bike, ensure that you look for a fork capable of decent travel.
Rear Shock
Yeti SB100 — C/Series / C1 bike has the FOX PERFORMANCE DPS 190 X 37.5MM model installed, and has a travel of 100mm. Rear shocks offer better comfort, better traction, and better cornering. This allows for quicker riding on rough roads and trails. In short, if you want smooth rides, get a full-suspension bicycle.
Wheels size
When leaving the production line, the SB100 — C/Series / C1 model has 29″ aluminum wheels. Having 29″ wheels means that you need less fork travel, leading to a reduction of the pedal bob effect. However, these wheels are not ideal for smaller people.
Brakes
When you want to stop the bike in time, the brakes are vital. The SB100 — C/Series / C1 has Hydraulic Disc brakes. These kinds of brakes are among the most popular models used on bikes. To sum up, you can ride your bike with confidence.
Sizes
Yeti SB100 — C/Series / C1 bike has 4 sizes, in the range of 158 cm – 199 cm (5.18 ft – 6.53 ft). In conclusion, it won’t take much to find one that’s right for you.
Dropper post
Yeti SB100 — C/Series / C1 includes a dropper post. A dropper post is a must-have these days if you’re riding anything remotely technical. The main benefit of a dropper post is increased safety while riding. As mentioned above, the lever system allows you to quickly move the saddle out of the way when approaching descents or trail obstacles.