Bike details
Overview
Key information split into simple groups.
Bike summary
-
-
Frame Aluminum -
Wheels 20" -
Groupset Tourney, Shimano -
Suspension Rigid -
Drivetrain 1 × 6 -
Brakes Rim
Parts list
Components
Main components, grouped by system.
Bike components
Frame
Frame
Storm 20” Aluminum Frame
Suspension Fork
MTB Type Long Radius w/V-Brake Mounts
Drivetrain
Rear Derailleur
Shimano Tourney 6spd - Black
Shift Levers
Shimano RevoShift 6spd - Black
Cassette
Shimano Tourney 6spd 14-28T
Crank
Alloy 30T
Bottom Bracket
Sealed Bearing Square Taper 68mm - Black
Chain
KMC 6spd Chain
Pedals
Jr. MTB Pedal PP - Black
Wheels
Front Hub
Aluminum MTB Hub 28H Ball Bearing
Rear Hub
Aluminum MTB Hub 28H, w/Ball Bearing
Rims
Aluminum 20” MTB - Black
Tires
Fast Rolling Tread, 20 x 1.75”
Brakes
Brakes
Tektro Alloy V-Brake w/Linear Spring
Brake Levers
Tektro Alloy Jr. MTB Levers w/Reach Adjust - Black
Cockpit
Stem
Alloy Jr. MTB 35mm - Black
Handlebar
Alloy Jr. Bar 600mm, 45mm Rise - Black
Grips
Jr. MTB Grip, Soft Krayton Rubber - Black
Headset
Internal Threadless 1-1/8” Ball Bearing
Seat
Saddle
Norco Jr. MTB Saddle - Black
Seatpost
Alloy 27.2 w/Micro Adjust Clamp - Black
Fit data
Geometry
Numbers for sizing and ride feel.
| Size | One Size |
|---|---|
| Stack Reach Ratio | 1.399 mm |
| Bottom Bracket Height | 245 mm |
| Front Center | 513 mm |
| Rake | 40 mm |
| Stack | 431 mm |
| Reach | 308 mm |
| Top Tube Length | 465 mm |
| Seat Tube Angle | 70 ° |
| Seat Tube Length | 230 mm |
| Head Tube Angle | 69 ° |
| Head Tube Length | 100 mm |
| Chainstay Length | 356 mm |
| Wheelbase | 868 mm |
| Bottom Bracket Drop | 10 mm |
| Standover Height | 548 mm |
| Wheels | 20" |
Model Overview
Storm 2.3 is part of the Norco Storm model. Norco launched 177 bikes of this model so far. Check out the entire range from 2020 of this model, by clicking this link.
Model range prices
Norco Storm 2.3 2020 is the cheapest bike model and costs 349$. Norco Storm 1 29 2020 is the most expensive one and costs 949$.
Safety
Take safety seriously when you ride your bike, and always wear your helmet. Moreover, don’t ride on the sidewalk. This is actually against the law in some states and can be dangerous for both you and pedestrians.
Average price for Mountain bikes
Our math shows that the average cost of a dependable Mountain bike is 616$. However, even though the average price of a Mountain bike is lower, you might still be able to get a top-quality bike. To make sure you don’t pay a higher amount than normal for your bike, always do some components analysis and read reviews.
When Norco released this model in 2020, its price was 349$. Comparing this to the average Mountain bike price, we see that the price is 76.5% smaller.
Overview of components
Wheels
The Storm 2.3 2020 bike is equipped with 20″ aluminum wheels when leaving the factory. This wheel size is used on bike models like BMX, children, or folding bikes. In conclusion, they are great for flat ground or very easy trails.
Brakes
Nothing is more important on a bike than its ability to brake properly. Norco Storm 2.3 is equipped with Rim brakes. Rim brakes are cheaper than hydraulic brakes, and also easier to maintain. However, they are not nearly as effective as hydraulic brakes are.