Polygon BEND CT5 2019
2019 Road
Estimate price |
1,399$
Weight | 9.9 kg 
Bike details
Overview
Key information split into simple groups.
Bike summary
-
-
Frame Aluminum -
Wheels 700c -
Groupset Rival -
Suspension Rigid -
Drivetrain 1 × 11 -
Brakes Hydraulic Disc
Parts list
Components
Main components, grouped by system.
Bike components
Frame
Frame
URBAN SPORT ALX W/ FLATMOUNT, FENDER READY
Suspension Fork
URBAN SPORT ALX W/ E-THRU & FLATMOUNT, FENDER READY
Rear Shock
-
Drivetrain
Rear Derailleur
SRAM RIVAL 11-SPEED
Shift Levers
SRAM RIVAL 11-SPEED
Cassette
SRAM PG 1130 11-SPEED 11-42T
Crank
SRAM RIVAL 11-SPEED 38T NARROW-WIDE
Bottom Bracket
SRAM GXP
Chain
KMC X-11
Wheels
Rims
ENTITY XL3 DISC 700C
Tires
SCHWALBE S-ONE, 700x30C
Brakes
Brakes
SRAM RIVAL HYDRAULIC
Cockpit
Stem
ENTITY XPERT
Handlebar
ENTITY XPERT DROPBAR W/ FLARE
Seat
Saddle
ENTITY FLUX W/ CRMO RAIL
Seatpost
ENTITY XPERT D:27.2MM OFFSET:15MM
Fit data
Geometry
Numbers for sizing and ride feel.
| Size | 50cm | 53cm | 56cm | 58cm |
|---|---|---|---|---|
| Stack Reach Ratio | 1.49 mm | 1.52 mm | 1.52 mm | 1.52 mm |
| Bottom Bracket Height | 270.5 mm | 270.5 mm | 270.5 mm | 270.5 mm |
| Front Center | 590 mm | 595 mm | 599 mm | 619 mm |
| Rake | 45 mm | 45 mm | 46 mm | 45 mm |
| Trail | 68 mm | 63 mm | 59 mm | 60 mm |
| Stack | 553.4 mm | 575.2 mm | 583.5 mm | 605.6 mm |
| Reach | 372 mm | 377.5 mm | 383.1 mm | 397.2 mm |
| Top Tube Length | 531 mm | 543 mm | 563 mm | 583 mm |
| Seat Tube Angle | 74 ° | 74 ° | 73 ° | 73 ° |
| Seat Tube Length | 500 mm | 530 mm | 560 mm | 590 mm |
| Head Tube Angle | 71.25 ° | 72 ° | 72.5 ° | 72.5 ° |
| Head Tube Length | 140 mm | 160 mm | 170 mm | 190 mm |
| Chainstay Length | 428 mm | 428 mm | 428 mm | 428 mm |
| Wheelbase | 1007 mm | 1012 mm | 1017 mm | 1037 mm |
| Bottom Bracket Drop | 72 mm | 72 mm | 72 mm | 72 mm |
| Standover Height | 741 mm | 765 mm | 789 mm | 808 mm |
| Wheels | 700 | 700 | 700 | 700 |
About this model
BEND CT5 completes the Polygon Bend model. 23 bikes variations carry this model name so far. You can easily view all of the Polygon Bend bikes models from 2019, here.
Model range prices
Polygon BEND FX4 2019 is the most affordable bike of this model and has a price of 999$. On the other hand, Polygon BEND RV RIVAL 2019, is the most expensive and costs 1499$.
Safety
Take safety seriously when you ride your bike, and always wear your helmet. Moreover, don’t ride on the sidewalk. This is actually against the law in some states and can be dangerous for both you and pedestrians.
Average price for Endurance bikes
According to our calculations, the average cost of an Endurance bike that is reliable is 2346$. However, you could also get a good Endurance bike even if you pay a lower amount than the average price. In conclusion, always check bike reviews and their components before making a purchase to make sure you don’t overpay.
Furthermore, this bike was made available in 2019 for 1399$. Comparing the average cost of an Endurance bike to this one, you will see that BEND CT5 price is 67.69% smaller.
Average weight for Endurance bikes
The average weight for Endurance bikes is 8.2 kg (18.08 lbs). You will have a greater advantage on climbs if your bike is easier than the average. On descents, however, a heavier bike will give you extra speed.
Weighing 9.9 kg (21.83 lbs), the BEND CT5 model is much heavier than average. In other words, this model is 20.73% heavier than the average Endurance bike.
BEND CT5 components
Fork material
When it comes to the fork, this bike has an aluminum one, which is a lighter material. However, it is not as tough, nor durable as steel is.
Wheels size
The wheels on BEND CT5 are the 700c aluminum type. These wheels are the most used kind for road bikes in general. However, these wheels don’t perform so well when passing over obstacles.
Brakes
When you want to stop the bike in time, the brakes are vital. The BEND CT5 has Hydraulic Disc brakes. Hydraulic disc brakes provide amazing stopping power, no matter what the terrain. To sum up, these are ideal for anyone.