Bike details
Overview
Key information split into simple groups.
Bike summary
-
-
Frame Aluminum -
Wheels 26" -
Travel Front 100mm -
Travel Rear 80mm -
Fork Manitou Circus Expert
-
Groupset FSA -
Suspension Full -
Drivetrain Single Speed -
Brakes Mechanical Disc
Parts list
Components
Main components, grouped by system.
Bike components
Frame
Frame
Haro Full X6 Alloy Thread Slope, dual suspension frame w/ internal head tube, Euro BB shell & ISCG Mount
Suspension Fork
Manitou Circus Expert, 100mm travel, tapered steerer tube w/ 20mm thru-axle
Rear Shock
Rockshox RS Deluxe R, 190X45 Debonair, 2 Tokens, MM Tune
Drivetrain
Rear Derailleur
N/A
Front Derailleur
N/A
Shift Levers
N/A
Cassette
14T Crmo Cog
Crank
FSA Gradient Modular 1X Direct Mount, 170mm, Megatooth 30t Forged Alloy Chainring
Bottom Bracket
FSA BB-392-EVO, sealed bearings
Chain
KMC Z1 HX 1/2" X 1/8"
Chain Guide
None
Pedals
Premium Slim Nylon w/ sealed bearings
Wheels
Front Hub
Pivit sealed bearing alloy disc, singlespeed cassette w/ 20mm front thru axle, 32h
Rear Hub
Pivit sealed bearing alloy disc, singlespeed cassette w/ 20mm front thru axle, 32h
Rims
Spank Ind. Spoon alloy doublewall, 32h
Tires
Kenda Small Block 8 26x2.35" Front & 26"x2.10" Rear, 60 TPI
Brakes
Brakes
TRP HY/RD-C 160, Cable / Hydraulic Disc Brake for IS Rear Mount, 160mm disc
Brake Levers
Odyssey Trigger for Single Gyro upper cable
Cockpit
Stem
FSA Gradient 1-1/8", 45mm Ext.
Handlebar
FSA Gradient Riser, 40mm Rise, 9 Deg. Backsweep, 6 deg. Upsweep; 31.8mm Clamp
Grips
Velo Lock-on
Headset
FSA # 51, 1-1/8"-1.5" Alloy, w/ top & lower AC Bearings
Seat
Saddle
Haro Padded Slim w/ Crmo rails
Seatpost
Pivit Alloy 31.6mm, 2-Bolt
Fit data
Geometry
Numbers for sizing and ride feel.
| Size | One Size |
|---|---|
| Stack Reach Ratio | 1.3 mm |
| Bottom Bracket Height | 349 mm |
| Front Center | 668 mm |
| Rake | 33 mm |
| Trail | 96 mm |
| Stack | 553 mm |
| Reach | 425 mm |
| Top Tube Length | 579 mm |
| Seat Tube Angle | 67 ° |
| Seat Tube Length | 320 mm |
| Head Tube Angle | 69 ° |
| Head Tube Length | 115 mm |
| Chainstay Length | 395 mm |
| Wheelbase | 1063 mm |
| Bottom Bracket Drop | -6 mm |
| Standover Height | 715 mm |
| Wheels | 26" |
| Rider Min Height | 120 cm |
About this model
Thread Slope belongs to the Haro Thread model. Haro released 9 bikes variations of this model so far. Take a sneak peek at all Haro Thread bikes models from 2019, by clicking here.
Model range prices
Haro Thread One 2019 is the most economical model, with a starting price of 1249$. Haro Thread Slope 2019 on the other hand costs 2699$, and is the most expensive model.
Safety
Take safety seriously when you ride your bike, and always wear your helmet. Moreover, don’t ride on the sidewalk. This is actually against the law in some states and can be dangerous for both you and pedestrians.
Average price for Dirt Jump bikes
Our math shows that the average cost of a dependable Dirt Jump bike is 863$. However, you could also get a good Dirt Jump bike even if you pay a lower amount than the average price. In conclusion, always check bike reviews and their components before making a purchase to make sure you don’t overpay.
Furthermore, this bike was made available in 2019 for 2699$. Doing a quick comparison, we notice that Thread Slope price is 212.75% higher than the average cost of a Dirt Jump bike.
Internal Cable Routing
It’s also important to mention the internal cable routing that this bike has. In short, this will allow you to keep your bike cables in great condition. Say goodbye to hanging cables.
Thread Slope components
Fork
Haro Thread Slope 2019 bike is equipped with the Manitou Circus Expert fork, and has 100mm travel. Bike forks absorb the shocks and give you a smooth and pleasant ride. To sum it all, when buying a bike, ensure that you look for a fork capable of decent travel.
Rear Shock
As for the rear shock, this bike has the Rockshox RS Deluxe R model, with a travel of 80mm. Rear shocks give you increased comfort, control, and traction, which is important when cornering or braking. This allows you to ride faster on bumpy roads. To sum up, always consider getting a bike that has a rear shock as well.
Wheels
The Thread Slope 2019 bike is equipped with 26″ aluminum wheels when leaving the factory. These wheels give you great handling over your bike. However, you will need increased suspension than in the case of 29″ wheels.
Brakes
For your safety, it is important to have quality breaks on your bike. Haro Thread Slope has Mechanical Disc brakes installed. They are much easier to maintain than hydraulic disk brakes. However, with hydraulic disk brakes, you have the ultimate braking power!