Bike details
Overview
Key information split into simple groups.
Bike summary
-
-
Frame Aluminum -
Wheels 20" -
Travel Front 50mm -
Groupset Altus -
Suspension Hardtail -
Drivetrain 1 × 8 -
Brakes Hydraulic Disc
Parts list
Components
Main components, grouped by system.
Bike components
Frame
Frame
Norco Charger 20", Aluminum, 9x135mm QR Dropouts, Lightweight/Low Standover Height
Suspension Fork
Spinner Grind 20" 50mm travel air spring w/lockout and aluminum steer tube
Drivetrain
Rear Derailleur
Shimano Altus RD-M310, 8 Speed
Shift Levers
Shimano Altus, RapidFire, 8 Speed
Cassette
Shimano CS-HG30, 11-32T, 8 Speed
Crank
3-Piece Aluminum, Narrow/Wide Chainring 28T
Bottom Bracket
Cartridge BB, Square Taper
Chain
KMC Z72, 8 Speed
Pedals
VP505 aluminum Jr. MTB flat pedall 9/16"
Wheels
Front Hub
KT aluminum disc 32H MTB hub
Rear Hub
KT Aluminum Disc, 32 Hole, 10x135mm QR
Rims
Double Wall Aluminum, 28 Hole
Tires
Kenda Small Block 8, 20x1.95"
Brakes
Brakes
Shimano BR-M365, Hydraulic Disc, Shimano 160mm Rotor
Brake Levers
Shimano BL-M365
Cockpit
Stem
Kalloy 35mm ext. 1-1/8" threadless MTB
Handlebar
Jr. MTB aluminum 600mm wide x 30mm rise
Grips
Jr. MTB Type, Soft Krayton Rubber, Lock-On
Headset
Internal threadless 1-1/8" ball bearing type
Seat
Saddle
Norco Jr. MTB saddle with cutaway design
Seatpost
Aluminum, Micro Adjust Top, 250mm Long, 27.2mm
Fit data
Geometry
Numbers for sizing and ride feel.
| Size | One Size |
|---|---|
| Stack Reach Ratio | 1.44 mm |
| Bottom Bracket Height | 248 mm |
| Front Center | 530 mm |
| Rake | 40 mm |
| Stack | 434 mm |
| Reach | 302 mm |
| Top Tube Length | 463 mm |
| Seat Tube Angle | 70 ° |
| Seat Tube Length | 255 mm |
| Head Tube Angle | 68 ° |
| Head Tube Length | 95 mm |
| Chainstay Length | 329 mm |
| Wheelbase | 859 mm |
| Bottom Bracket Drop | 7 mm |
| Standover Height | 550 mm |
| Wheels | 20" |
Model Overview
Charger 2.1 is a Norco Charger model. Norco launched 83 bikes of this model so far. Check out the entire range from 2019 of this model, by clicking this link.
Model range prices
Norco Charger 20 2019 is the most economical model, with a starting price of 679$. Norco Charger 1 29 2019 on the other hand costs 1499$, and is the most expensive model.
Safety
Your safety is a top priority so always wear a helmet when you ride your bike. Moreover, wear the right clothing. You want to be visible to other drivers, so avoid wearing dark clothing.
Mountain bikes average price
If you want an acceptable Mountain bike you should know that the average price is 616$. However, even if your budget is less than the average, you might still be able to get a top-quality Mountain bike. In short, before purchasing your ideal bike do some research about its components, and also check for reviews online.
When Norco released this model in 2019, its price was 679$. Comparing the average cost of a Mountain bike to this one, you will see that Charger 2.1 price is 10.23% higher.
Charger 2.1 components
Fork material
When it comes to the fork, this bike has an aluminum one, so there won’t be much extra weight added to the bike. However, they are not so stiff as carbon forks are.
Wheels
When it comes to wheels, the Charger 2.1 bike is equipped with the 20″ aluminum model. The 20″ wheels are a good fit for folding bikes, BMX, or children bikes. In conclusion, they are great for flat ground or very easy trails.
Brakes
Stopping the bike when needed, it’s essential for your safety. This bike has Hydraulic Disc brakes. These kinds of brakes are among the most popular models used on bikes. To sum up, you can ride your bike with confidence.