Specialized S-Works Enduro 27.5 Frame 2018
2018 Mountain
Estimate price |
3,500$
Bike details
Overview
Key information split into simple groups.
Frame summary
-
-
Frame Carbon -
Wheels 27.5" -
Travel Rear 170mm -
Suspension Full
Sizing
Recommended size guide.
SM
158cm - 171cm
MD
168cm - 180cm
LG
178cm - 189cm
XL
186cm - 199cm
Parts list
Components
Main components, grouped by system.
Bike components
Frame
Frame
S-Works FACT 11m, X-Wing layout, 27.5 All Mountain Geometry, SWAT™ Door integration, threaded BB, fully enclosed internal cable routing, ManFu link, oversized pivot bearings, alloy link and adjustable shock extension, 12x148mm dropouts, replaceable derailleur hanger, 170mm of travel
Rear Shock
Custom Öhlins STX, Single-Tube design, Rx All Mountain Tune, AUTOSAG, adjustable compression & rebound damping, 216x57mm
Drivetrain
Bottom Bracket
BSA, 73mm, threaded
Fit data
Geometry
Numbers for sizing and ride feel.
| Size | SM | MD | LG | XL |
|---|---|---|---|---|
| Stack Reach Ratio | 1.4 mm | 1.35 mm | 1.32 mm | 1.27 mm |
| Bottom Bracket Height | 342 mm | mm | 342 mm | mm |
| Front Center | 739 mm | 764 mm | 792 mm | 819 mm |
| Rake | 46 mm | 46 mm | 46 mm | 46 mm |
| Trail | 113 mm | 113 mm | 113 mm | 113 mm |
| Stack | 586 mm | 595 mm | 609 mm | 618 mm |
| Reach | 419 mm | 440 mm | 462 mm | 485 mm |
| Top Tube Length | 556 mm | 581 mm | 608 mm | 635 mm |
| Seat Tube Angle | 76 ° | ° | 76 ° | ° |
| Seat Tube Length | 396 mm | 430 mm | 467 mm | 521 mm |
| Head Tube Angle | 65 ° | 65 ° | 65 ° | 65 ° |
| Head Tube Length | 95 mm | 105 mm | 120 mm | 130 mm |
| Chainstay Length | 429 mm | 429 mm | 429 mm | 429 mm |
| Wheelbase | 1167 mm | 1193 mm | 1221 mm | 1248 mm |
| Bottom Bracket Drop | 8 mm | 5 mm | 8 mm | 5 mm |
| Standover Height | 745 mm | 755 mm | 768 mm | 782 mm |
| Wheels | 27" | 27" | 27" | 27" |
| Rider Min Height | 158 cm | 168 cm | 178 cm | 186 cm |
| Rider Max Height | 171 cm | 180 cm | 189 cm | 199 cm |
About this model
S-Works Enduro 27.5 Frame is part of the Specialized Enduro model. 117 frames variations carry this model name so far. You can easily view all of the Specialized Enduro frames models from 2018, here.
Model range prices
The most economical model, the Specialized S-Works Enduro 27.5 Frame 2018 has a starting price of 3500$. Specialized S-Works Enduro 29/6Fattie Frame 2018 on the other hand is the most expensive at 3500$.
Safety
When cycling always take safety very seriously. Wear a helmet, obey the traffic rules and wear hi-vis clothes. In short, take care of yourself so others can take care of you.
Average price for Downhill frames
According to our calculations, the average cost of a Downhill frame that is reliable is 1923$. However, even if your budget is less than the average, you might still be able to get a top-quality Downhill frame. To sum up, when you purchase your frame, make sure to check if it has reviews, and also do some components research.
This frame was released in 2018 and its price was 3500$. Comparing the average cost of a Downhill frame to this one, you will see that S-Works Enduro 27.5 Frame price is 82.01% higher.
Internal Cable Routing
Moreover, this bike comes with internal cable routing allowing you to keep the cables in a good condition. It also makes it look more professional.
Overview of components
Rear Shock
As for the rear shock, this frame has the Custom Öhlins STX model, with a travel of 170mm. Rear shocks improve riding comfort and give you greater control over all terrains. In short, a full-suspension bike will give you the smoothest ride possible.
Sizes
This frame is available in 4 sizes. They vary from 158 cm – 199 cm (5.18 ft – 6.53 ft). In short, it won’t be difficult to find the right one for you.