Felt Burner 2-SP 2017
2017 Urban
Estimate price |
599$
Weight | 16.1 kg 
Bike details
Overview
Key information split into simple groups.
Bike summary
-
-
Frame Aluminum -
Wheels 29" -
Groupset Shimano -
Suspension Rigid -
Drivetrain Single Speed -
Brakes Coaster
Parts list
Components
Main components, grouped by system.
Bike components
Frame
Frame
Felt curved cantilever aluminum w/ carrier bosses
Suspension Fork
Unicrown steel, straight blades
Rear Shock
n/a
Drivetrain
Rear Derailleur
n/a
Front Derailleur
n/a
Shift Levers
Shimano Revo 7-speed twist
Cassette
22T cog
Crank
3-piece, 8-spline tubular heat-treated Cr-Mo, 170mm
Bottom Bracket
USA size, looseball
Chain
KMC Z410, 1/8"
Chain Guide
n/a
Pedals
Aluminum body w/ cage
Wheels
Front Hub
Felt aluminum mid-flange, semi sealed, 36H
Rear Hub
Sturmey Archer 2-speed kick back aluminum coaster brake, 36H
Rims
Aluminum 30mm wide, double-wall
Spokes
14G stainless steel
Tires
Knobby, 29 x 2.0"
Brakes
Brakes
Coaster brake
Brake Levers
Tektro aluminum 2 finger
Cockpit
Stem
Front mount 4-bolt, forged aluminum, 50mm extension, Ø22.2mm
Handlebar
MX cruiser w/ crossbar, Ø22.2mm, 120mm rise, 675mm wide
Grips
MX design, Kraton rubber w/ flanges
Headset
1-1/8" semi-integrated threadless w/ Felt aluminum Lifestyle top cap
Seat
Saddle
Felt old school w/ custom cover & steel rails
Seatpost
Ø27.2 x 350mm
Fit data
Geometry
Numbers for sizing and ride feel.
| Size | One Size |
|---|---|
| Stack Reach Ratio | 1.49 mm |
| Front Center | 673 mm |
| Rake | 67 mm |
| Trail | 61 mm |
| Stack | 588 mm |
| Reach | 395 mm |
| Top Tube Length | 647 mm |
| Seat Tube Angle | 67 ° |
| Seat Tube Length | 465 mm |
| Head Tube Angle | 69 ° |
| Head Tube Length | 140 mm |
| Chainstay Length | 522 mm |
| Wheelbase | 1185 mm |
| Bottom Bracket Drop | 75 mm |
| Standover Height | 738 mm |
| Wheels | 29" |
| Rider Min Height | 120 cm |
Model Overview
Burner 2-SP is part of the Felt Burner model. Felt released 4 bikes variations of this model so far.
Safety
When cycling always take safety very seriously. Wear a helmet, obey the traffic rules and wear hi-vis clothes. In short, take care of yourself so others can take care of you.
Cruiser bikes average price
If you want an acceptable Cruiser bike you should know that the average price is 332$. However, you could also get a good Cruiser bike even if you pay a lower amount than the average price. To sum up, when you purchase your bike, make sure to check if it has reviews, and also do some components research.
At the moment of the release date, Felt Burner 2-SP price was 599$. If we compare this with the average Cruiser bike cost we notice that the price is 80.42% more expensive.
Cruiser bikes average weight
The average weight for Cruiser bikes is 15.83 kg (34.9 lbs). A lighter bike will give you some extra advantage when climbing. A heavier bike will have more speed for descents.
Weighing 16.1 kg (35.49 lbs), the Burner 2-SP model is slightly heavier than average. In short, the average Cruiser bike weight is 1.71% lower than this one.
Overview of components
Fork material
The fork on this bike is made out of steel, which tends to be more flexible than carbon forks in general. However, a carbon fork is considerably lighter.
Wheels size
The Burner 2-SP 2017 bike is equipped with 29″ aluminum wheels when leaving the factory. Having 29″ wheels means that you need less fork travel, leading to a reduction of the pedal bob effect. However, the 29″ wheels will add a little more weight to the bike itself.
Brakes
For your safety, it is important to have quality breaks on your bike. Felt Burner 2-SP has Coaster brakes installed. These brakes are pretty efficient, and they’re not so pricey. However, they have flaws, especially if the chain falls off.