Bike details
Overview
Key information split into simple groups.
Bike summary
-
-
Frame Steel -
Wheels 26" -
Travel Front 100mm -
Fork RST
-
Suspension Hardtail -
Drivetrain Single Speed -
Brakes Mechanical Disc
Parts list
Components
Main components, grouped by system.
Bike components
Frame
Frame
Ryde 26 w/chromoly top tube and downtube
Suspension Fork
RST Dirt w/100mm travel
Rear Shock
N/A
Drivetrain
Rear Derailleur
N/A
Front Derailleur
N/A
Shift Levers
N/A
Cassette
BMX 14T FW
Crank
Dirt Jump BMX tubular chromoly w/8 spline, 28T
Bottom Bracket
Mid BB w/8 spline axle
Chain
KMC Z410
Chain Tensioner
N/A
Pedals
Plastic DJ/BMX w/steel pins
Wheels
Front Hub
Alloy disc hub w/disc mount 36H
Rear Hub
Alloy disc hub w/disc mount 36H
Rims
Aluminum 26" DJ profile 36H "
Tires
26x2.125 DJ/Street tread
Brakes
Brakes
Tektro Mechanical disc
Brake Levers
Tektro
Disk Rotors
160mm rotors
Cockpit
Stem
Alloy 50mm DJ type with 4 bolt front clamp
Handlebar
Norco 6061 aluminum 25mm rise
Grips
Norco BMX design w/small flange
Headset
Femin 809H integrated BMX type
Seat
Saddle
Norco DJ/BMX one piece
Seatpost
Integrated w/seat
Fit data
Geometry
Numbers for sizing and ride feel.
| Size | Short | Long |
|---|---|---|
| Stack Reach Ratio | 1.45 mm | 1.39 mm |
| Bottom Bracket Height | 320 mm | 320 mm |
| Front Center | 633 mm | 648 mm |
| Rake | 44 mm | 44 mm |
| Trail | 81 mm | 81 mm |
| Stack | 562 mm | 562 mm |
| Reach | 388 mm | 403 mm |
| Top Tube Length | 569 mm | 584 mm |
| Seat Tube Angle | 72 ° | 72 ° |
| Seat Tube Length | 285 mm | 285 mm |
| Head Tube Angle | 69.5 ° | 69.5 ° |
| Head Tube Length | 110 mm | 110 mm |
| Chainstay Length | 387 mm | 387 mm |
| Wheelbase | 1019 mm | 1034 mm |
| Bottom Bracket Drop | 20 mm | 20 mm |
| Standover Height | 743 mm | 736 mm |
| Front Travel | 100 mm | 100 mm |
| Wheels | 26" | 26" |
About this model
Ryde 26 is part of the Norco Ryde model. There are 20 bikes that carry this model name. Check out the entire range from 2017 of this model, by clicking this link.
Model range prices
The most economical model, the Norco Ryde 26 2017 has a starting price of 499$. Norco Ryde 24 2017 on the other hand is the most expensive at 499$.
Safety
When cycling always take safety very seriously. Wear a helmet, obey the traffic rules and wear hi-vis clothes. In short, take care of yourself so others can take care of you.
Dirt Jump bikes average price
If you want an acceptable Dirt Jump bike you should know that the average price is 863$. However, you could also get a good Dirt Jump bike even if you pay a lower amount than the average price. In conclusion, always check bike reviews and their components before making a purchase to make sure you don’t overpay.
Furthermore, this bike was made available in 2017 for 499$. If we compare this with the average Dirt Jump bike cost we notice that the price is 72.95% smaller.
Ryde 26 components
Fork
The fork installed on this bike is the RST model. The travel on this model is 100mm. Bike forks are perfect to absorb shocks and provide a great riding experience overall. In short, make sure you choose one with a decent fork when you purchase your dream bike.
Wheels
As for the wheels, Norco Ryde 26 2017, has a 26″ aluminum model. Being a little smaller, these wheels will fit both small and tall riders. However, you will need increased suspension than in the case of 29″ wheels.
Brakes
We ride faster and faster, so a good braking system is essential on a bike nowadays. The Ryde 26 comes with Mechanical Disc brakes. They are much easier to maintain than hydraulic disk brakes. However, performance-wise there is room for improvement.