Bike details
Overview
Key information split into simple groups.
Bike summary
-
-
Frame Steel -
Wheels 26" -
Travel Front 80mm -
Fork Marzocchi
-
Suspension Hardtail -
Brakes Mechanical Disc
Parts list
Components
Main components, grouped by system.
Bike components
Frame
Frame
P. Series Reynolds 520 Cr-Mo, double-butted TT/DT, SS-specific dirt/park/strett geo, externally relieved HT, horizontal drop out w/ disc mount, integrated tensioner & hardware, disc only
Suspension Fork
Marzocchi DJ2, 80mm, 32mm stanchions, magnesium lower, cold forged crown, hydraulic damping w/ rebound adj, coil spring w/ air preload adj.
Drivetrain
Cassette
Cr-Mo 1/2x1/8x12t cog
Crank
P. 2pc Tubulars, heat treated Cr-Mo for 8 spline, 175mm length
Bottom Bracket
Mid BB, 2x sealed cartridge bearing w/ 19mm spindle, alloy tube and cone spacers
Chain
KMC Z510HX, 1/2"" x 1/8"", anti-drop inner links
Pedals
SBC Lo Pro plastic platform, loose ball, 9/16""
Wheels
Front Hub
P. Low flange, forged alloy, 3/8"" bolt on axle, cartridge bearings, 36h
Rear Hub
P. Disc Cassette, Forged alloy single speed cassette, machined flanges and disc mount, 3/8"" bolt on axle, cartridge bearings, 36h
Rims
P. Disc 26"", alloy double wall, pinned w/ eyelets, 36h
Spokes
2mm (14g) stainless
Tires
Specialized Rhythm Lite Control, 26 x 2.3"", 60TPI, aramid bead
Brakes
Brakes
Avid BB5, mechanical disc, 140mm G2 Clean Sweep rotor
Brake Levers
Avid FR-5, alloy, two-finger, linear pull
Cockpit
Stem
SBC Aggro Stem, 3D forged/CNC, 4-bolt, 35mm length
Handlebar
Butted 31.8mm alloy riserbar, 60mm rise, 8 degree back sweep, 6 degree up
Grips
P. Grip, flanged soft compound, closed end, 150mm
Headset
Integrated FSA Impact, 1-1/8"" threadless, Campy type cartridge bearings
Seat
Saddle
P. Combo, 1pc co-molded composite saddle and alloy seat post combination
Seatpost
Alloy, no offset, 25.4mm
Fit data
Geometry
Numbers for sizing and ride feel.
| Size | LG |
|---|---|
| Stack Reach Ratio | 1.453 mm |
| Bottom Bracket Height | 317 mm |
| Stack | 555 mm |
| Reach | 382 mm |
| Top Tube Length | 600 mm |
| Seat Tube Angle | 71 ° |
| Seat Tube Length | 332 mm |
| Head Tube Angle | 69.5 ° |
| Head Tube Length | 128 mm |
| Chainstay Length | 390 mm |
| Wheelbase | 1049 mm |
| Bottom Bracket Drop | 26 mm |
| Standover Height | 712 mm |
| Wheels | 26" |
| Rider Min Height | 120 cm |
About this model
P.2 belongs to the Specialized P2 model. Specialized launched 6 bikes of this model so far.
Safety
Your safety should be the top priority when you go for a ride. In short, make sure that you always use a helmet, high visibility clothing, and proper lights when riding at night-time.
Average price for Dirt Jump bikes
If you want to purchase a solid Dirt Jump bike, it is important to know that the average cost is 863$. However, you could also get a good Dirt Jump bike even if you pay a lower amount than the average price. To sum up, when you purchase your bike, make sure to check if it has reviews, and also do some components research.
Overview of components
Fork
The fork installed on this bike is the Marzocchi model. The travel on this model is 80mm. Bike forks are great for shock absorption and provide you with a smooth ride. In conclusion, always look for a fork with decent travel when you buy a bike.
Fork material
The fork on this bike is made out of magnesium, so, it’s a bit lighter than steel. However, it is not so resistant as a fork steel is.
Wheels size
When leaving the production line, the P.2 model has 26″ aluminum wheels. These wheels give you great handling over your bike. However, they provide less traction than 29″ wheels do.
Brakes
When you want to stop the bike in time, the brakes are vital. The P.2 has Mechanical Disc brakes. They are much easier to maintain than hydraulic disk brakes. However, they don’t have the stopping power of hydraulic brakes.