Bike details
Overview
Key information split into simple groups.
Bike summary
-
-
Frame Aluminum -
Wheels 26" -
Travel Front 63mm -
Fork SunTour NEX
-
Groupset Acera, Altus -
Suspension Hardtail -
Drivetrain 3 × 8 -
Brakes Rim
Parts list
Components
Main components, grouped by system.
Bike components
Frame
Frame
Specialized A1 Premium Aluminum, Ground Control geometry, 26"" low entry comfort frame, formed tubes, forged dropouts w/ replaceable hanger
Suspension Fork
SR Suntour NEX-4110V2, 63mm travel, 1pc. alloy lower, Hi-Ten stanchions and steerer, coil/mcu w/ preload adjust, spring assisted seals
Rear Shock
---
Drivetrain
Rear Derailleur
Shimano Acera, 8-speed
Front Derailleur
Shimano FD-M190, 31.8mm clamp, top swing, dual pull
Shift Levers
Shimano, SL-M310, 8-speed rapid fire
Cassette
SRAM 8-speed, 11-32t
Crank
Shimano FC-M171, w/ chainguard
Bottom Bracket
Cartridge bearing, square spindle with crank stop right side and capless bolts
Chain
KMC Z8 w/ reusable Missing Link
Pedals
Comfort pedal, composite body w/rubber top, sealed loose ball bearings
Wheels
Front Hub
Double sealed, ground race, dual lock nuts w/ 17mm contact side, 5mm QR
Rear Hub
Double sealed, ground race, dual lock nuts w/ 19mm contact side, 5mm QR
Rims
Alloy double sidewalls, pinned, 32h
Spokes
2mm (14g) stainless
Tires
Specialized Hemisphere Armadillo, 26x1.95"", 60TPI, wire bead
Brakes
Brakes
Alloy linear pull, 1pc. pad
Brake Levers
Alloy 4-finger, kraton lever pad, for rapid fire shifter
Cockpit
Stem
Ground control adjustable rise, alloy head/quill, 25.4mm clamp
Handlebar
Aluminum comfort riser bar, 25.4mm, 60mm rise, 620mm wide, 15 degree back sweep, 5 degree up
Headset
1-1/8"" threaded, sealed loose ball bearings
Seat
Saddle
Comfort Plus with dual density foam and springs for extra comfort
Seatpost
Alloy suspension, 2-bolt head, 27.2mm w/ 3.8mm spring
Model Overview
Expedition Elite Low Entry is a Specialized Expedition model. Specialized released 16 bikes variations of this model so far. Check out the entire range from 2011 of this model, by clicking this link.
Safety
Your safety should be the top priority when you go for a ride. In short, make sure that you always use a helmet, high visibility clothing, and proper lights when riding at night-time.
Comfort bikes average price
According to our calculations, the average cost of a Comfort bike that is reliable is 360$. However, paying less money than this amount doesn’t mean that you couldn’t get a great Comfort bike. In conclusion, always check bike reviews and their components before making a purchase to make sure you don’t overpay.
Overview of components
Fork
Specialized Expedition Elite Low Entry 2011 bike is equipped with the SunTour NEX fork, and has 63mm travel. Bike forks are great for shock absorption and provide you with a smooth ride. In short, you should always ensure you have a good fork when purchasing a bike.
Fork material
Expedition Elite Low Entry has an aluminum fork, which doesn’t add too much extra weight to the bike. However, it is not so stiff as steel or carbon forks are.
Wheels
The Expedition Elite Low Entry 2011 bike is equipped with 26″ aluminum wheels when leaving the factory. These wheels give you great handling over your bike. However, you will need increased suspension than in the case of 29″ wheels.
Brakes
For your safety, it is important to have quality breaks on your bike. Specialized Expedition Elite Low Entry has Rim brakes installed. Rim brakes are cheaper than hydraulic brakes, and also easier to maintain. However, they have problems in wet conditions.
Sizes
This bike has one size only, so it might not fit you. In short, make sure you double-check if it fits you.