Ariel Rider N-Class 2019
2019 E-bike
Estimate price |
1,699$
Weight | 27.89 kg E-bike
Bike details
Overview
Key information split into simple groups.
Bike summary
-
Category -
Frame Carbon -
Wheels 26" -
Travel Front 25mm -
Groupset Shimano -
Suspension Hardtail -
Motor 75Nm hub-drive -
Battery Weight: 7 lbs (3.17 kg), Brand: Samsung 18650 25E, Voltage: 48 volts, Amp Hours: 12.4 ah, Watt Hours: 595.2 wh, Chemistry: Lithium-ion -
Drivetrain 1 × 7 -
Brakes Rim
Parts list
Components
Main components, grouped by system.
Bike components
Frame
Frame
6061 Aluminum Alloy, Double Heat Treated T4 and T6 for Strength, Polycarbonate Plastic
Suspension Fork
Custom Made Chromoly Steel Springer Style Suspension Fork, 25mm Travel, 100mm Hub Spacing, 9mm Axle with Quick Release Skewer
Drivetrain
Shift Levers
Shimano ASLTX50R-7CT SIS Index Thumb Shifter
Cassette
7 Speed 1x7 Shimano Altus ARDM310DLC Derailleur, 11-32 Tooth
Crank
Prowheel, Forged Alloy, 170mm Length, 46 Tooth Steel Chainring with Alloy Bash Guard
Pedals
Wellgo B087DU Aluminum Alloy Platform
Wheels
Rims
Double Walled, Aluminum Alloy, Paint-Matched, 30mm Width, 36 Hole
Spokes
Stainless Steel, 13 Gauge Front 12 Gauge Rear, Silver with Nipples
Tires
CST Palm Bay, 26" x 2.35" (60-559)
Cockpit
Stem
Promax MA-579, Tool-Free Adjustable Angle, 100mm Length, 10mm Sloped Bottom Spacer
Handlebar
Zoom BH-21S Cruiser Bar, Alloy, 700mm Length
Grips
Faux-Leather Padded, Stitched
Headset
Neco, Internal Cups, Straight 1-1/8"
Seat
Saddle
Velo 8030 Extra-Wide Plush Plus, Sprung, Faux-Leather
Seatpost
Promax, Aluminum Alloy, Forged Head
Motor & Battery
Motor
Weight: 8.15 lbs (3.69 kg), Brand: Dapu M155, Type: Rear-Mounted Geared Hub, Nominal Output: 750 watts, Peak Output: 900 watts, Torque: 75 Newton meters
Battery
Weight: 7 lbs (3.17 kg), Brand: Samsung 18650 25E, Voltage: 48 volts, Amp Hours: 12.4 ah, Watt Hours: 595.2 wh, Chemistry: Lithium-ion
Fit data
Geometry
Numbers for sizing and ride feel.
| Size | 07cm |
|---|---|
| Wheels | 26" |
| Rider Min Height | 120 cm |
About this model
N-Class is part of the Arielrider E N Class model. There is 1 e-bike that carries this model name.
Safety
When you go for a ride, don’t forget to put your helmet on. Moreover, ride with traffic, not against it. This will help you stay visible to drivers and also makes it easier for them to see you.
General Urban e-bikes average price
According to our calculations, the average cost of a General Urban e-bike that is reliable is 2098$. However, even though the average price of a General Urban e-bike is lower, you might still be able to get a top-quality e-bike. To make sure you don’t pay a higher amount than normal for your e-bike, always do some components analysis and read reviews.
At the moment of the release date, Ariel Rider N-Class price was 1699$. Doing a quick comparison, we notice that N-Class price is 23.48% smaller than the average cost of a General Urban e-bike.
General Urban e-bikes average weight
General Urban e-bikes have an average weight of 24.08 kg (53.09 lbs). It is a good advantage to have a lighter bike than the average. However, a heavier bike is more efficient on descents.
N-Class weighs 27.89 kg (61.49 lbs) and is much heavier than the average. In short, the average General Urban e-bike weight is 15.82% lower than this one.
Overview of components
Fork material
N-Class has a steel fork, which tends to be more flexible than carbon forks in general. However, a carbon fork is considerably lighter.
Wheels
When it comes to wheels, the N-Class e-bike is equipped with the 26″ aluminum model. Being a little smaller, these wheels will fit both small and tall riders. However, you will need increased suspension than in the case of 29″ wheels.
Brakes
Nothing is more important on a bike than its ability to brake properly. Ariel Rider N-Class is equipped with Rim brakes. Rim brakes are cheaper than hydraulic brakes, and also easier to maintain. However, they have problems in wet conditions.