FLX Baby Maker 2020
2020 E-bike
Estimate price |
1,999$
Weight | 15.05 kg E-bike
Bike details
Overview
Key information split into simple groups.
Bike summary
-
Category -
Frame Aluminum -
Wheels 700c -
Suspension Rigid -
Motor 250W 40Nm hub-drive -
Battery Weight: 2.5 lbs (1.13 kg), Brand: Samsung, Voltage: 36 volts, Amp Hours: 7 ah, Watt Hours: 252 wh, Chemistry: Lithium-ion -
Drivetrain Belt Drive -
Brakes Rim
Parts list
Components
Main components, grouped by system.
Bike components
Frame
Frame
Aluminum Alloy
Suspension Fork
Rigid Aluminum, 100mm Hub Spacing, 9mm Axle with Quick Release Skewer
Drivetrain
Cassette
1 Speed 1x1 22 Tooth Rear Belt Ring
Crank
Forged Aluminum Alloy Arms, 170mm Length, Square Taper Bottom Bracket Spindle, 64 Tooth Steel Front Belt Ring with Aluminum Guard and 5 Bolt Spider Provisions
Pedals
Wellgo M255, Aluminum Alloy Platform with Fixed Pins, Black
Wheels
Rims
Aluminum Alloy, Double Walled, 21mm Outer Width, 36 Hole, Black
Spokes
Stainless Steel, 13 Gauge Front 12 Gauge Rear, Black with Silver Screws
Tires
Kenda, 700 x 25c
Cockpit
Stem
Slight Rise, Aluminum Alloy, 35mm Length, 28.8mm Clamp Diameter
Handlebar
Bull Horn, Aluminum Alloy, 80mm Rise, 135º Bend, 475mm Width
Grips
Black Bar-Tape
Headset
Threadless, Sealed Cartridge Bearings, Tapered 1.2" - 1.5"
Seat
Saddle
FLX Branded, Vinyl Covered Gel, Active Footprint
Seatpost
Aluminum Alloy, Quick Release Collar
Motor & Battery
Motor
Weight: 4.4 lbs (1.99 kg), Brand: Aikema (AKM), Type: Rear-Mounted Geared Hub, Nominal Output: 250 watts, Peak Output: 350 watts, Torque: 40 Newton meters
Battery
Weight: 2.5 lbs (1.13 kg), Brand: Samsung, Voltage: 36 volts, Amp Hours: 7 ah, Watt Hours: 252 wh, Chemistry: Lithium-ion
Fit data
Geometry
Numbers for sizing and ride feel.
| Size | 42cm |
|---|---|
| Wheels | 700 |
| Rider Min Height | 120 cm |
About this model
Baby Maker is part of the Flx E Baby model. FLX launched 1 e-bike of this model so far.
Safety
When cycling always take safety very seriously. Wear a helmet, obey the traffic rules and wear hi-vis clothes. In short, take care of yourself so others can take care of you.
Average price for General Urban e-bikes
If you want to purchase a solid General Urban e-bike, it is important to know that the average cost is 2098$. However, this doesn’t mean that if you spend less money on a General Urban e-bike, you couldn’t get a decent one. To sum up, when you purchase your e-bike, make sure to check if it has reviews, and also do some components research.
When FLX released this model in 2020, its price was 1999$. Comparing the average cost of a General Urban e-bike to this one, you will see that Baby Maker price is 4.95% smaller.
General Urban e-bikes average weight
General Urban e-bikes have an average weight of 24.08 kg (53.09 lbs). It is a good advantage to have a lighter bike than the average. However, a heavier bike is more efficient on descents.
FLX Baby Maker it’s weighing 15.05 kg (33.18 lbs). At this weight, is much lighter than average. In other words, this model is 60% lighter than the average General Urban e-bike.
Overview of components
Fork material
Baby Maker has an aluminum fork, so there won’t be much extra weight added to the e-bike. However, they are not so stiff as carbon forks are.
Wheels
The Baby Maker 2020 e-bike is equipped with 700c aluminum wheels when leaving the factory. There is no doubt, that 700c wheels are very popular on all road bike models. However, these wheels don’t perform so well when passing over obstacles.
Brakes
Stopping the bike when needed, it’s essential for your safety. This e-bike has Rim brakes. Rim brakes are cheaper than hydraulic brakes, and also easier to maintain. However, they are not nearly as effective as hydraulic brakes are.