Bike details
Overview
Key information split into simple groups.
Bike summary
-
Category -
Frame Steel -
Wheels 29" -
Suspension Rigid -
Drivetrain Single Speed -
Brakes Rim
Parts list
Components
Main components, grouped by system.
Bike components
Frame
Frame
Dyno 87' Pro Compe Design, Full Cr-Mo, DT Gusset, MID BB, Inverted Seat Stay V-Brake, Integrated 1-1/8" H/T w/ Removable Rotor Tabs, 2.5" Tire Clearance
Suspension Fork
Dyno 87' Pro Compe Design, 100% Cr-Mo 2pc. Steerer, 3/8" Axle Dropouts
Drivetrain
Cassette
16T Cog
Crank
GT Power Series Alloy 3pc. 175mm Arms, 22mm Square Cr-Mo Spindle, GT 5mm 36T 86' Performer Design Alloy Chainwheel
Bottom Bracket
MID Sealed Bearing
Chain
KMC Z1 Wide
Pedals
GT Low Profile FS Platform Design
Wheels
Front Hub
GT Superlace High, Alloy CNC Body, Sealed Bearings, 36h, 3/8" x 17mm Female Bolt
Rear Hub
GT Superlace High Cassette, Alloy CNC body, 5 Sealed Bearings, 3 Pawl Cassette, 36h, 3/8" x 17mm Female Bolts
Rims
Alloy Double Wall, 36h
Spokes
Stainless Steel, 14g
Tires
GT Smoothie 29 x 2.5"
Brakes
Brakes
Promax P-1 Aluminum V-Brake w/ Soft Compound Pad
Brake Levers
Alloy V-type
Cockpit
Stem
GT Mallet 100% CNC Front Load, 1-1/8", 19mm Rise, 43mm
Handlebar
Dyno Pretzel Cheat Code 2pc. 100% Cr-Mo, 7.875"H x 31.5"W, 5°Up, 9° Back
Grips
GT Super Soft 155mm Single Compound w/o Flange w/ GT Removable Plug
Headset
1 1/8" Integrated Design, 45X45 Degree Sealed Bearings
Seat
Saddle
GT Cheat Code Railed
Seatpost
Alloy Micro Adjust 25.4 x 300mm
About this model
Dyno Pro Compe LTD 29 is part of the Gt Dyno model. There are 10 bikes that carry this model name. Take a sneak peek at all Gt Dyno bikes models from 2021, by clicking here.
Model range prices
The most economical model, the GT Dyno Pro Compe LTD 29 2021 has a starting price of 885$. GT Dyno Pro Compe 29 2021 on the other hand is the most expensive at 920$.
Safety
Your safety should be the top priority when you go for a ride. In short, make sure that you always use a helmet, high visibility clothing, and proper lights when riding at night-time.
Average price for BMX bikes
According to our calculations, the average cost of a BMX bike that is reliable is 348$. However, you could also get a good BMX bike even if you pay a lower amount than the average price. To sum up, when you purchase your bike, make sure to check if it has reviews, and also do some components research.
Furthermore, this bike was made available in 2021 for 885$. Doing a quick comparison, we notice that Dyno Pro Compe LTD 29 price is 154.31% higher than the average cost of a BMX bike.
Dyno Pro Compe LTD 29 components
Fork material
Dyno Pro Compe LTD 29 has a steel fork, which tends to be more flexible than carbon forks in general. However, a carbon fork is considerably lighter.
Wheels
As for the wheels, GT Dyno Pro Compe LTD 29 2021, has a 29″ aluminum model. Having 29″ wheels means that you need less fork travel, leading to a reduction of the pedal bob effect. However, the 29″ wheels will add a little more weight to the bike itself.
Brakes
For your safety, it is important to have quality breaks on your bike. GT Dyno Pro Compe LTD 29 has Rim brakes installed. Rim brakes deliver an average performance overall. However, they have problems in wet conditions.
Sizes
This bike has one size only, so it might not fit you. In short, make sure you double-check if it fits you.