Bike details
Overview
Key information split into simple groups.
Bike summary
-
Category -
Frame Steel -
Wheels 29" -
Suspension Rigid -
Drivetrain Single Speed -
Brakes Rim
Parts list
Components
Main components, grouped by system.
Bike components
Frame
Frame
Dyno 87' Pro Compe Design, Full Cr-Mo, DT Gusset, MID BB, Inverted Seat Stay V-Brake, Integrated 1-1/8" H/T w/ Removable Rotor Tabs, 2.5" Tire Clearance
Suspension Fork
Dyno 87' Pro Compe Design, 100% Cr-Mo 2pc. Steerer, 3/8" Axle Dropouts
Drivetrain
Cassette
16T Cog
Crank
GT Power Series Alloy 3pc. 175mm Arms, 22mm Square Cr-Mo Spindle, GT 5mm 36T 86' Performer Design Alloy Chainwheel
Bottom Bracket
MID Sealed Bearing
Chain
KMC Z1 Wide
Pedals
GT Low Profile FS Platform Design
Wheels
Front Hub
GT Superlace High, Alloy CNC Body, Sealed Bearings, 36h, 3/8" x 17mm Female Bolt
Rear Hub
GT Superlace High Cassette, Alloy CNC body, 5 Sealed Bearings, 3 Pawl Cassette, 36h, 3/8" x 17mm Female Bolts
Rims
Alloy Double Wall, 36h
Spokes
Stainless Steel, 14g
Tires
GT Smoothie 29 x 2.5"
Brakes
Brakes
Promax P-1 Aluminum V-Brake w/ Soft Compound Pad
Brake Levers
Alloy V-type
Cockpit
Stem
GT Mallet 100% CNC Front Load, 1-1/8", 19mm Rise, 43mm
Handlebar
Dyno Pretzel Cheat Code 2pc. 100% Cr-Mo, 7.875"H x 31.5"W, 5°Up, 9° Back
Grips
GT Super Soft 155mm Single Compound w/o Flange w/ GT Removable Plug
Headset
1 1/8" Integrated Design, 45X45 Degree Sealed Bearings
Seat
Saddle
GT Cheat Code Railed
Seatpost
Alloy Micro Adjust 25.4 x 300mm
About this model
Dyno Pro Compe 29 is a Gt Dyno model. 10 bikes variations carry this model name so far. Check out the entire range from 2021 of this model, by clicking this link.
Model range prices
GT Dyno Pro Compe LTD 29 2021 is the most affordable bike of this model and has a price of 885$. On the other hand, GT Dyno Pro Compe 29 2021, is the most expensive and costs 920$.
Safety
When you go for a ride, don’t forget to put your helmet on. Moreover, ride with traffic, not against it. This will help you stay visible to drivers and also makes it easier for them to see you.
BMX bikes average price
According to our math, the average price for a trustworthy BMX bike is 348$. However, paying less money than this amount doesn’t mean that you couldn’t get a great BMX bike. As a general rule of thumb, you should always read reviews about the bike and its components before buying it to ensure you don’t pay too much.
Furthermore, if we have a quick look at this model’s cost, we can see that at its release date the price was 920$. In conclusion, this bike price is 164.37% higher than the price of the average BMX bike.
Dyno Pro Compe 29 components
Fork material
Dyno Pro Compe 29 has a steel fork, which is tougher than carbon in the case of an impact. However, it can add some extra weight to the bike.
Wheels size
When leaving the production line, the Dyno Pro Compe 29 model has 29″ aluminum wheels. Having 29″ wheels means that you need less fork travel, leading to a reduction of the pedal bob effect. However, 29″ wheels will make your bike react slower to obstacles you may encounter.
Brakes
We ride faster and faster, so a good braking system is essential on a bike nowadays. The Dyno Pro Compe 29 comes with Rim brakes. Rim brakes are cheaper than hydraulic brakes, and also easier to maintain. However, you could spend a little extra and get a bike that has hydraulic brakes.
Sizes
This bike has one size only, so it might not fit you. In conclusion, double-check its size to make sure it’s a good fit for you.