Polygon BEND RIV 2020
2020 Road
Estimate price |
1,299$
Weight | 14.75 kg 
Bike details
Overview
Key information split into simple groups.
Bike summary
-
-
Frame Aluminum -
Wheels 700c -
Groupset Apex, SRAM -
Suspension Rigid -
Drivetrain 1 × 11 -
Brakes Hydraulic Disc
Parts list
Components
Main components, grouped by system.
Bike components
Frame
Frame
TOURING ALX W/ FLATMOUNT, FENDER & CARRIER READY
Suspension Fork
TOURING ALX W/ E-THRU & FLATMOUNT, FENDER & CARRIER READY
Rear Shock
-
Drivetrain
Rear Derailleur
SRAM APEX 11-SPEED
Shift Levers
SRAM APEX 11-SPEED
Cassette
SRAM PG 1130 11-SPEED 11-42T
Crank
SRAM FC-S350 11-SPEED 38T NARROW-WIDE
Bottom Bracket
SRAM GXP
Chain
KMC X-11
Wheels
Rims
ENTITY XL2 DISC 700C
Tires
SCHWALBE MARATHON PLUS TOUR, 700x40C
Brakes
Brakes
SRAM APEX HYDRAULIC
Cockpit
Stem
ENTITY XPERT
Handlebar
ENTITY XPERT DROPBAR W/ FLARE
Seat
Saddle
ENTITY W/ STEEL RAIL
Seatpost
ENTITY XPERT D:27.2MM OFFSET:15MM
Fit data
Geometry
Numbers for sizing and ride feel.
| Size | 49cm | 52cm | 56cm | 59cm |
|---|---|---|---|---|
| Stack Reach Ratio | 1.52 mm | 1.52 mm | 1.56 mm | 1.56 mm |
| Bottom Bracket Height | 288 mm | 288 mm | 288 mm | 288 mm |
| Front Center | 629 mm | 648 mm | 660 mm | 676 mm |
| Rake | 50 mm | 50 mm | 50 mm | 50 mm |
| Trail | 57 mm | 57 mm | 57 mm | 57 mm |
| Stack | 610.7 mm | 629.7 mm | 653.5 mm | 672.5 mm |
| Reach | 402 mm | 415 mm | 420 mm | 430 mm |
| Top Tube Length | 576 mm | 600 mm | 618 mm | 634 mm |
| Seat Tube Angle | 74 ° | 73.5 ° | 73 ° | 73 ° |
| Seat Tube Length | 490 mm | 520 mm | 560 mm | 590 mm |
| Head Tube Angle | 72 ° | 72 ° | 72 ° | 72 ° |
| Head Tube Length | 180 mm | 200 mm | 225 mm | 245 mm |
| Chainstay Length | 445 mm | 445 mm | 445 mm | 445 mm |
| Wheelbase | 1065 mm | 1084 mm | 1097 mm | 1113 mm |
| Bottom Bracket Drop | 65 mm | 65 mm | 65 mm | 65 mm |
| Standover Height | 771 mm | 798 mm | 834 mm | 861 mm |
| Wheels | 700 | 700 | 700 | 700 |
About this model
BEND RIV is a Polygon Bend model. There are 23 bikes that carry this model name. You can get a glimpse at all models from 2020, by clicking on this link.
Model range prices
Polygon BEND R2 2020 is the most economical model, with a starting price of 919$. Polygon BEND R5 2020 on the other hand costs 1559$, and is the most expensive model.
Safety
When you go for a ride, don’t forget to put your helmet on. Moreover, ride with traffic, not against it. This will help you stay visible to drivers and also makes it easier for them to see you.
Average price for Touring bikes
If you want an acceptable Touring bike you should know that the average price is 1007$. However, paying less money than this amount doesn’t mean that you couldn’t get a great Touring bike. As a general rule of thumb, you should always read reviews about the bike and its components before buying it to ensure you don’t pay too much.
When Polygon released this model in 2020, its price was 1299$. If we compare this with the average Touring bike cost we notice that the price is 29% higher.
Average weight for Touring bikes
Touring bikes have an average weight of 13.35 kg (29.43 lbs). A lighter bike will give you some extra advantage when climbing. A heavier bike will have more speed for descents.
considerably heavier than average, BEND RIV has a weight of 14.75 kg (32.52 lbs). To sum up, it’s 10.49% heavier than the average weight of Touring bikes.
BEND RIV components
Fork material
The fork is made out of aluminum, which is a lighter material. However, it is not as tough, nor durable as steel is.
Wheels
The BEND RIV 2020 bike is equipped with 700c aluminum wheels when leaving the factory. These wheels are the most used kind for road bikes in general. However, while they give you great speed and control, these wheels are not so bump-friendly.
Brakes
Stopping the bike when needed, it’s essential for your safety. This bike has Hydraulic Disc brakes. With Hydraulic Disc brakes, you’ll be able to stop on a dime, even in wet or icy conditions. To sum up, these are ideal for anyone.