Yeti SB6 — T/Series / XX1 2019
2019 Mountain
Estimate price |
9,499$
Weight | 12.73 kg 
Bike details
Overview
Key information split into simple groups.
Bike summary
-
-
Frame Carbon -
Wheels 27.5" -
Travel Front 170mm -
Travel Rear 152mm -
Fork Fox Factory Float 36
-
Groupset X01 Eagle, XX1 Eagle -
Suspension Full -
Brakes Hydraulic Disc
Parts list
Components
Main components, grouped by system.
Bike components
Frame
Frame
TURQ Series carbon fiber frame, Switch Infinity suspension technology, press-fit BB92, fully enclosed internal cable routing, 148mm x 12mm BOOST dropouts, sealed Enduro Max pivot bearings, integrated derailleur hanger, and axle.
Suspension Fork
FOX FACTORY 36/170MM GRIP 2
Rear Shock
FOX FACTORY X2, 8.5” X 2.5”
Drivetrain
Rear Derailleur
SRAM X01 EAGLE
Shift Levers
SRAM XX1 EAGLE
Cassette
SRAM XX1 1299 EAGLE 10-50
Crank
SRAM X01 CARBON EAGLE 30T
Bottom Bracket
SRAM DUB BB92
Chain
SRAM XX1 EAGLE
Wheels
Rims
DT SWISS XM 1501 SPLINE ONE 30MM
Tires
MAXXIS MINION DHF 2.5
Brakes
Brakes
SRAM CODE RSC
Disk Rotors
SRAM CENTERLINE Front 200mm / Rear 180mm
Cockpit
Stem
RACE FACE TURBINE 35X50MM
Handlebar
YETI CARBON 35X800MM
Grips
ERGON GE1
Headset
CANE CREEK 40 INSET
Seat
Saddle
ERGON CUSTOM SME3
Seatpost
FOX TRANSFER FACTORY 30.9MM / XS-S: 100MM, MD: 125MM, L-XL: 150MM
Fit data
Geometry
Numbers for sizing and ride feel.
| Size | SM | MD | LG | XL | XS |
|---|---|---|---|---|---|
| Stack Reach Ratio | 1.54 mm | 1.49 mm | 1.44 mm | 1.41 mm | 1.39 mm |
| Bottom Bracket Height | 350 mm | 349.9 mm | 349.9 mm | 349.7 mm | 349.6 mm |
| Front Center | 690.1 mm | 717.5 mm | 744.2 mm | 771.6 mm | 799.6 mm |
| Stack | 577.2 mm | 592.3 mm | 602.5 mm | 617.6 mm | 637.7 mm |
| Reach | 375.7 mm | 396.2 mm | 418.4 mm | 438.9 mm | 457.7 mm |
| Top Tube Length | 552.4 mm | 577.8 mm | 603.2 mm | 628.7 mm | 654.1 mm |
| Seat Tube Angle | 73 ° | 73 ° | 73 ° | 73 ° | 72.9 ° |
| Seat Tube Length | 381 mm | 419.1 mm | 444.5 mm | 482.6 mm | 520.7 mm |
| Head Tube Angle | 64.94 ° | 64.9 ° | 64.9 ° | 64.9 ° | 64.9 ° |
| Head Tube Length | 93.5 mm | 110 mm | 121 mm | 137.5 mm | 159.5 mm |
| Chainstay Length | 440 mm | 440 mm | 440 mm | 440 mm | 440 mm |
| Wheelbase | 1130 mm | 1157 mm | 1184 mm | 1211 mm | 1239 mm |
| Bottom Bracket Drop | 5 mm | 6 mm | 6 mm | 6 mm | 6 mm |
| Standover Height | 758 mm | 761 mm | 762 mm | 763 mm | 762 mm |
| Wheels | 27" | 27" | 27" | 27" | 27" |
Model Overview
SB6 — T/Series / XX1 belongs to the Yeti Sb6 model. Yeti launched 17 bikes of this model so far. You can easily view all of the Yeti Sb6 bikes models from 2019, here.
Model range prices
The most economical model, the Yeti SB6 — C/Series / GX 2019 has a starting price of 5199$. Yeti SB6 — T/Series / XX1 2019 on the other hand is the most expensive at 9499$.
Safety
When you go for a ride, don’t forget to put your helmet on. Moreover, ride with traffic, not against it. This will help you stay visible to drivers and also makes it easier for them to see you.
Average price for Enduro bikes
According to our calculations, the average cost of an Enduro bike that is reliable is 3599$. However, this doesn’t mean that if you spend less money on an Enduro bike, you couldn’t get a decent one. As a general rule of thumb, you should always read reviews about the bike and its components before buying it to ensure you don’t pay too much.
This bike was released in 2019 and its price was 9499$. Comparing the average cost of an Enduro bike to this one, you will see that SB6 — T/Series / XX1 price is 163.93% more expensive.
Average weight for Enduro bikes
The average weight for Enduro bikes is 14.27 kg (31.46 lbs). An easier bike will give you a big advantage in climbs. However, a heavier bike can gain speed when you descend.
considerably lighter than average, SB6 — T/Series / XX1 has a weight of 12.73 kg (28.06 lbs). In conclusion, the average Enduro bike weighs 12.1% more than SB6 — T/Series / XX1.
Internal Cable Routing
It’s also important to mention the internal cable routing that this bike has. In short, this will allow you to keep your bike cables in great condition. Say goodbye to hanging cables.
SB6 — T/Series / XX1 components
Fork
This bike has the Fox Factory Float 36 fork installed. The fork’s travel is 170mm. Bike forks are good shock absorbers and provide a smooth ride and a great experience. In short, make sure you choose one with a decent fork when you purchase your dream bike.
Rear Shock
The shock that’s installed on this bike is FOX FACTORY X2, with a travel distance of 152mm. Rear shocks improve riding comfort and give you greater control over all terrains. To sum up, get a full-suspension bike if you want the smoothest rides.
Wheels size
The wheels on SB6 — T/Series / XX1 are the 27.5″ aluminum type. These wheels will provide you with more control over the bike. However, the 27.5″ wheels are less forgiving than the 29″ wheels.
Brakes
When you want to stop the bike in time, the brakes are vital. The SB6 — T/Series / XX1 has Hydraulic Disc brakes. With Hydraulic Disc brakes, you’ll be able to stop on a dime, even in wet or icy conditions. To sum up, your safety is in good hands.
Dropper post
A dropper post is included with the SB6 — T/Series / XX1. If used correctly, a dropper post gives you more faith, maneuverability, and greater control over your bike.