Yeti SB6 — C/Series / GX 2019
2019 Mountain
Estimate price |
5,199$
Weight | 13.23 kg 
Bike details
Overview
Key information split into simple groups.
Bike summary
-
-
Frame Carbon -
Wheels 27.5" -
Travel Front 170mm -
Travel Rear 152mm -
Fork Fox Performance Float 36
-
Groupset GX Eagle -
Suspension Full -
Drivetrain 1 × 12 -
Brakes Hydraulic Disc
Parts list
Components
Main components, grouped by system.
Bike components
Frame
Frame
C/Series carbon fiber frame, Switch Infinity suspension technology, press-fit BB92, fully enclosed internal cable routing, 148mm x 12mm BOOST dropouts, sealed Enduro Max pivot bearings, integrated derailleur hanger, and axle.
Suspension Fork
FOX PERFORMANCE 36/170MM
Rear Shock
FOX PERFORMANCE DPX2, 8.5” X 2.5”
Drivetrain
Rear Derailleur
SRAM GX EAGLE
Shift Levers
SRAM GX EAGLE
Cassette
SRAM 1275 EAGLE 10-50
Crank
SRAM GX EAGLE 30T
Bottom Bracket
SRAM DUB BB92
Chain
SRAM GX EAGLE
Wheels
Rims
DT SWISS M1900 30MM
Tires
MAXXIS MINION DHF 2.50
Brakes
Brakes
SRAM GUIDE R
Disk Rotors
SRAM CENTERLINE Front 200m / Rear 180mm
Cockpit
Stem
RACE FACE AEFFECT 35X50MM
Handlebar
RACE FACE AEFFECT R 35X780MM
Grips
ERGON GE1
Headset
CANE CREEK 40 INSET
Seat
Saddle
WTB CUSTOM VOLT
Seatpost
FOX TRANSFER 30.9MM / XS-S: 100MM, MD: 125MM, L-XL: 150MM
Fit data
Geometry
Numbers for sizing and ride feel.
| Size | SM | MD | LG | XL | XS |
|---|---|---|---|---|---|
| Stack Reach Ratio | 1.54 mm | 1.49 mm | 1.44 mm | 1.41 mm | 1.39 mm |
| Bottom Bracket Height | 350 mm | 349.9 mm | 349.9 mm | 349.7 mm | 349.6 mm |
| Front Center | 690.1 mm | 717.5 mm | 744.2 mm | 771.6 mm | 799.6 mm |
| Stack | 577.2 mm | 592.3 mm | 602.5 mm | 617.6 mm | 637.7 mm |
| Reach | 375.7 mm | 396.2 mm | 418.4 mm | 438.9 mm | 457.7 mm |
| Top Tube Length | 552.4 mm | 577.8 mm | 603.2 mm | 628.7 mm | 654.1 mm |
| Seat Tube Angle | 73 ° | 73 ° | 73 ° | 73 ° | 72.9 ° |
| Seat Tube Length | 381 mm | 419.1 mm | 444.5 mm | 482.6 mm | 520.7 mm |
| Head Tube Angle | 64.94 ° | 64.9 ° | 64.9 ° | 64.9 ° | 64.9 ° |
| Head Tube Length | 93.5 mm | 110 mm | 121 mm | 137.5 mm | 159.5 mm |
| Chainstay Length | 440 mm | 440 mm | 440 mm | 440 mm | 440 mm |
| Wheelbase | 1130 mm | 1157 mm | 1184 mm | 1211 mm | 1239 mm |
| Bottom Bracket Drop | 5 mm | 6 mm | 6 mm | 6 mm | 6 mm |
| Standover Height | 758 mm | 761 mm | 762 mm | 763 mm | 762 mm |
| Wheels | 27" | 27" | 27" | 27" | 27" |
About this model
SB6 — C/Series / GX completes the Yeti Sb6 model. There are 17 bikes that carry this model name. You can get a glimpse at all models from 2019, by clicking on this link.
Model range prices
Yeti SB6 — C/Series / GX 2019 is the most economical model, with a starting price of 5199$. Yeti SB6 — T/Series / XX1 2019 on the other hand costs 9499$, and is the most expensive model.
Safety
Take safety seriously when you ride your bike, and always wear your helmet. Moreover, don’t ride on the sidewalk. This is actually against the law in some states and can be dangerous for both you and pedestrians.
Enduro bikes average price
If you want an acceptable Enduro bike you should know that the average price is 3599$. However, even if your budget is less than the average, you might still be able to get a top-quality Enduro bike. As a general rule of thumb, you should always read reviews about the bike and its components before buying it to ensure you don’t pay too much.
At the moment of the release date, Yeti SB6 — C/Series / GX price was 5199$. If we compare this with the average Enduro bike cost we notice that the price is 44.46% higher.
Average weight for Enduro bikes
If we make a quick analysis of the average weight of an Enduro bike, we get 14.27 kg (31.46 lbs). A lighter bike will give you some extra advantage when climbing. A heavier bike will have more speed for descents.
Weighing 13.23 kg (29.17 lbs), the SB6 — C/Series / GX model is a bit lighter than average. To sum up, it’s 7.86% lighter than the average weight of Enduro bikes.
Internal Cable Routing
Moreover, this bike comes with internal cable routing allowing you to keep the cables in a good condition. It also makes it look more professional.
SB6 — C/Series / GX components
Fork
Yeti SB6 — C/Series / GX 2019 bike is equipped with the Fox Performance Float 36 fork, and has 170mm travel. Bike forks are great for shock absorption and provide you with a smooth ride. In short, make sure you choose one with a decent fork when you purchase your dream bike.
Rear Shock
The SB6 — C/Series / GX has a rear shock with a travel of 152mm. The model FOX PERFORMANCE DPX2 is the one installed in this bike. Bike rear shocks increase the riding comfort, and also give you more control over technical trails. To sum up, always consider getting a bike that has a rear shock as well.
Wheels size
When it comes to wheels, the SB6 — C/Series / GX bike is equipped with the 27.5″ aluminum model. The 27.5″ wheels are a great choice for smaller riders. However, the 27.5″ wheels are less forgiving than the 29″ wheels.
Brakes
Nothing is more important on a bike than its ability to brake properly. Yeti SB6 — C/Series / GX is equipped with Hydraulic Disc brakes. Hydraulic disc brakes are perfect for mountain biking, road cycling, and commuting. To sum up, these are ideal for anyone.
Dropper post
Every bike should have a dropper post, and this one does. Therefore, climbing or descending will be a breeze.