Bike details
Overview
Key information split into simple groups.
Bike summary
-
-
Frame Steel -
Wheels 26" -
Travel Front 100mm -
Fork Marzocchi
-
Suspension Hardtail -
Drivetrain Single Speed -
Brakes Hydraulic Disc
Parts list
Components
Main components, grouped by system.
Bike components
Frame
Frame
Haro Full Crmo Steel Reserve frame w/ internal head tube & Euro BB shell
Suspension Fork
Marzocchi DJ3; 100mm travel
Rear Shock
N/A
Drivetrain
Rear Derailleur
N/A
Front Derailleur
N/A
Shift Levers
N/A
Cassette
12T Crmo Cog
Crank
Haro Crmo 8 Spline 3-pc 25t
Bottom Bracket
4 x Sealed bearing
Chain
KMC HV410 1/2" X 1/8"
Chain Guide
None
Pedals
Wellgo Platform alloy w/ Replaceable Pins
Wheels
Front Hub
Pivit alloy disc singlespeed cassette 36h
Rear Hub
Pivit alloy disc singlespeed cassette 36h
Rims
Weinmann KMAX Pro alloy doublewall
Spokes
Stainless steel
Tires
Kenda K-Rad 26 x 2.3"
Brakes
Brakes
Tektro Auriga HD-M275
Brake Levers
Tektro Auriga HD-M275
Cockpit
Stem
Haro front load alloy 1-1/8"
Handlebar
Haro Steel 65mm riser bar, 730mm wide, 6 Deg. Sweep
Grips
Haro Counterfeit
Headset
VP-A46ACM, 1-1/8" Alloy, 45°X45° Semi-Cartridge Bearings
Seat
Saddle
Haro Padded Slim one piece seat/post
Seatpost
Alloy 25.4mm included w/ seat
Fit data
Geometry
Numbers for sizing and ride feel.
| Size | Short | Long |
|---|---|---|
| Stack Reach Ratio | 1.43 mm | 1.36 mm |
| Bottom Bracket Height | 325 mm | 325 mm |
| Front Center | 624 mm | 642 mm |
| Rake | 40 mm | 40 mm |
| Trail | 89 mm | 90 mm |
| Stack | 546 mm | 546 mm |
| Reach | 383 mm | 402 mm |
| Top Tube Length | 559 mm | 575 mm |
| Seat Tube Angle | 70 ° | 70 ° |
| Seat Tube Length | 285 mm | 285 mm |
| Head Tube Angle | 69 ° | 69 ° |
| Head Tube Length | 117 mm | 117 mm |
| Chainstay Length | 393 mm | 393 mm |
| Wheelbase | 1016 mm | 1034 mm |
| Bottom Bracket Drop | 17 mm | 17 mm |
| Standover Height | 674 mm | 668 mm |
| Wheels | 26" | 26" |
Model Overview
Steel Reserve 1.2 is part of the Haro Steel model. Haro released 12 bikes variations of this model so far. Check out the entire range from 2019 of this model, by clicking this link.
Model range prices
Haro Steel Reserve 1.1 2019 is the most affordable bike of this model and has a price of 599$. On the other hand, Haro Steel Reserve 1.2 2019, is the most expensive and costs 929$.
Safety
When you go for a ride, don’t forget to put your helmet on. Moreover, ride with traffic, not against it. This will help you stay visible to drivers and also makes it easier for them to see you.
Average price for Dirt Jump bikes
If you want an acceptable Dirt Jump bike you should know that the average price is 863$. However, even if your budget is less than the average, you might still be able to get a top-quality Dirt Jump bike. As a general rule of thumb, you should always read reviews about the bike and its components before buying it to ensure you don’t pay too much.
Furthermore, this bike was made available in 2019 for 929$. Doing a quick comparison, we notice that Steel Reserve 1.2 price is 7.65% higher than the average cost of a Dirt Jump bike.
Internal Cable Routing
This bike has an internal cable routing. As a result, this helps to preserve the bike’s cables. No more cables around your bike.
Overview of components
Fork
This bike has the Marzocchi fork installed. The fork’s travel is 100mm. Bike forks absorb the shocks and give you a smooth and pleasant ride. To sum up, when buying a bicycle, make sure you get a fork that is capable of delivering decent travel.
Wheels size
As for the wheels, Haro Steel Reserve 1.2 2019, has a 26″ aluminum model. These wheels give you great handling over your bike. However, you will need increased suspension than in the case of 29″ wheels.
Brakes
Nothing is more important on a bike than its ability to brake properly. Haro Steel Reserve 1.2 is equipped with Hydraulic Disc brakes. Hydraulic disc brakes provide amazing stopping power, no matter what the terrain. To sum up, these are ideal for anyone.