Cannondale F-Si Hi-MOD 1 2019
2019 Mountain
Estimate price |
7,350$
Weight | 8.8 kg 
Bike details
Overview
Key information split into simple groups.
Bike summary
-
Category -
Frame Carbon -
Wheels 29" / 29" -
Travel Front 100mm -
Fork Cannondale Lefty Ocho Carbon
-
Groupset XX1 Eagle, X01 Eagle -
Suspension Hardtail -
Drivetrain 1 × 12 -
Brakes Hydraulic Disc
Sizing
Recommended size guide.
XS
156cm - 166cm
SM
163cm - 174cm
MD
171cm - 182cm
LG
179cm - 189cm
XL
185cm - 195cm
Parts list
Components
Main components, grouped by system.
Bike components
Frame
Frame
ALL-NEW F-Si, Hi-MOD BallisTec Carbon, SAVE, PF30A, tapered head tube, Speed Release 12mm thru axle, Ai Offset
Suspension Fork
ALL-NEW Lefty Ocho Carbon, 29", 100mm, Chamber Damper with cable lockout, OppO Spring System, tapered steerer, 55mm offset
Rear Shock
N/A
Drivetrain
Rear Derailleur
SRAM XX1 Eagle
Front Derailleur
N/A
Shift Levers
SRAM X01 Eagle, 12-speed
Cassette
SRAM XG-1295, X01 Eagle, 10-50, 12-speed
Crank
Truvativ Stylo Carbon, 34T, Ai Custom
Bottom Bracket
Cannondale Alloy PressFit30
Chain
SRAM GX Eagle, 12-speed
Chain Guide
N/A
Pedals
Not Included
Wheels
Front Hub
Lefty 60 front, HollowGram 12x148 rear w/ DT Swiss internals
Rear Hub
Lefty 60 front, HollowGram 12x148 rear w/ DT Swiss internals
Rims
HollowGram 23, Superlight Hi-Impact Carbon, tubeless ready, 28h, 23mm inner width
Spokes
HollowGram, double-butted straight pull (Ai Offset dish - rear)
Tires
Schwalbe Racing Ray 29 x 2.25" front, Racing Ralph 2.25" rear, Snake Skin Addix Speedgrip Compound, tubeless ready
Brakes
Brakes
SRAM Level TLM hydro disc, 160/160mm Centerline rotors
Brake Levers
SRAM Level TLM hydro disc
Cockpit
Stem
Cannondale C1, 7075 Alloy, 1-1/8", 31.8, 7-degree
Handlebar
Cannondale C1 Flat, Carbon, 8-degree sweep, 760mm
Grips
Cannondale Locking Grips
Headset
Integrated, 1-1/8 to 1.5", sealed angular contact bearings (Integrated steer stop size small only)
Seat
Saddle
Fabric Scoop Flat Race, ti rails
Seatpost
Cannondale C1 Full Carbon, 27.2 x 350/400mm
Fit data
Geometry
Numbers for sizing and ride feel.
| Size | XS | SM | MD | LG | XL |
|---|---|---|---|---|---|
| Stack Reach Ratio | 1.5 mm | 1.51 mm | 1.46 mm | 1.42 mm | 1.38 mm |
| Bottom Bracket Height | 308 mm | 308 mm | 308 mm | 308 mm | 308 mm |
| Stack | 567 mm | 600 mm | 610 mm | 621 mm | 633 mm |
| Reach | 378 mm | 398 mm | 418 mm | 438 mm | 458 mm |
| Top Tube Length | 551 mm | 581 mm | 604 mm | 627 mm | 651 mm |
| Seat Tube Angle | 73.1 ° | 73.1 ° | 73.1 ° | 73.1 ° | 73.1 ° |
| Seat Tube Length | 330 mm | 330 mm | 430 mm | 480 mm | 530 mm |
| Head Tube Angle | 69 ° | 69 ° | 69 ° | 69 ° | 69 ° |
| Head Tube Length | 90 mm | 90 mm | 101 mm | 113 mm | 126 mm |
| Chainstay Length | 421 mm | 425 mm | 425 mm | 425 mm | 425 mm |
| Wheelbase | 1053 mm | 1084 mm | 1108 mm | 1132 mm | 1157 mm |
| Bottom Bracket Drop | 47 mm | 66 mm | 66 mm | 66 mm | 66 mm |
| Standover Height | 713 mm | 753 mm | 791 mm | 826 mm | 861 mm |
| Wheels | 27" | 29" | 29" | 29" | 29" |
| Rider Min Height | 156 cm | 163 cm | 171 cm | 179 cm | 185 cm |
| Rider Max Height | 166 cm | 174 cm | 182 cm | 189 cm | 195 cm |
About this model
F-Si Hi-MOD 1 completes the Cannondale F Si model. Cannondale released 59 bikes variations of this model so far. You can easily view all of the Cannondale F Si bikes models from 2019, here.
Model range prices
The most economical model, the Cannondale F-Si Carbon 5 2019 has a starting price of 2300$. Cannondale F-Si Hi-MOD World Cup 2019 on the other hand is the most expensive at 9500$.
Safety
Make sure you wear a helmet on every ride, and that your bike performs well. In short, this means checking the tires, brakes, and chain to make sure everything is in good working order.
Average price for Crosscountry bikes
According to our calculations, the average cost of a Crosscountry bike that is reliable is 1905$. However, you could also get a good Crosscountry bike even if you pay a lower amount than the average price. As a general rule of thumb, you should always read reviews about the bike and its components before buying it to ensure you don’t pay too much.
Furthermore, this bike was made available in 2019 for 7350$. Comparing the average cost of a Crosscountry bike to this one, you will see that F-Si Hi-MOD 1 price is 285.83% more expensive.
Crosscountry bikes average weight
Crosscountry bikes weigh an average of 12.4 kg (27.34 lbs). An easier bike will give you a big advantage in climbs. However, a heavier bike can gain speed when you descend.
F-Si Hi-MOD 1 weighs 8.8 kg (19.4 lbs) and is much lighter than the average. In other words, this model is 40.91% lighter than the average Crosscountry bike.
Overview of components
Fork
This bike has the Cannondale Lefty Ocho Carbon fork installed. The fork’s travel is 100mm. Bike forks are great for shock absorption and provide you with a smooth ride. To sum it all, when buying a bike, ensure that you look for a fork capable of decent travel.
Fork material
F-Si Hi-MOD 1 has a carbon fork, so, its weight is considerably lighter than one made out of steel. However, they cost a bit more than steel forks.
Wheels size
The wheels on F-Si Hi-MOD 1 are the 29″ carbon type. Having 29″ wheels means that you need less fork travel, leading to a reduction of the pedal bob effect. However, 29″ wheels will make your bike react slower to obstacles you may encounter.
Brakes
We ride faster and faster, so a good braking system is essential on a bike nowadays. The F-Si Hi-MOD 1 comes with Hydraulic Disc brakes. Hydraulic disc brakes are perfect for mountain biking, road cycling, and commuting. To sum up, you can ride your bike with confidence.
Sizes
This bike is available in 5 sizes. They vary from 156 cm – 195 cm (5.12 ft – 6.4 ft). In short, it won’t be difficult to find the right one for you.