Cannondale Scalpel-Si Hi-MOD 1 2020
2020 Mountain
Estimate price |
8,800$
Weight | 10.2 kg 
Bike details
Overview
Key information split into simple groups.
Bike summary
-
Category -
Frame Carbon -
Wheels 29" / 29" -
Travel Front 100mm -
Travel Rear 100mm -
Fork Cannondale Lefty Ocho Carbon
-
Groupset XTR -
Suspension Full -
Drivetrain 1 × 12 -
Brakes Hydraulic Disc
Sizing
Recommended size guide.
SM
158cm - 171cm
MD
168cm - 180cm
LG
178cm - 189cm
XL
186cm - 199cm
Parts list
Components
Main components, grouped by system.
Bike components
Frame
Frame
BallisTec Hi-MOD Carbon, 100mm travel, Zero Pivot seatstay, Carbon Link, PF30-83, 1.5 Si head tube, Ai Offset, 100mm travel, Zero Pivot seatstay, Carbon Link, PF30-83, 1.5 Si head tube, Ai Offset
Suspension Fork
Lefty Ocho Carbon, 27.5/29", 100mm, Chamber Damper with cable lockout, OppO Spring System, tapered steerer, 50/55mm offset
Rear Shock
Fox Float Factory DPS EVOL, 100mm, remote-actuated, Kashima coating
Drivetrain
Rear Derailleur
Shimano XTR, Shadow Plus
Shift Levers
Shimano XTR, 12-speed
Cassette
Shimano XT, 10-51, 12-speed
Crank
HollowGram, BB30 w/X-Sync® SpideRing, 34T, Ai offset
Bottom Bracket
Cannondale Alloy PressFit30
Chain
Shimano XTR, 12-speed
Pedals
Not Included
Wheels
Front Hub
(F) Lefty 60
Rear Hub
(R) Hollowgram w/ DT internals 12x142 w/ Micro Spline
Rims
HollowGram 23, Superlight Hi-Impact Carbon, 28h, 23mm inner width, tubeless ready
Spokes
DT Swiss Competition Race (Ai Offset dish - rear)
Tires
(F) Schwalbe Racing Ray 27.5/29 x 2.25", Snake Skin, Addix Speedgrip Compound, tubeless ready(R) Schwalbe Racing Ralph 27.5/29 x 2.25", Snake Skin, Addix Speed Compound, tubeless ready
Brakes
Brakes
Shimano XTR Race, 180/160mm Ice Tech rotors
Brake Levers
Shimano XTR Race
Cockpit
Stem
Cannondale 1, 7075 Alloy, 1-1/8", 31.8, 7°
Handlebar
ENVE M5, Carbon, 760mm, 31.8mm, 5° rise, 9° sweep
Grips
Cannondale Locking Grips
Headset
Integrated, 1-1/8 to 1.5", sealed angular contact bearings (Integrated steer stop size small only)
Seat
Saddle
Fabric Scoop Flat Race, titanium rails
Seatpost
ENVE Carbon, 31.6 x 400mm, 0mm offset
Fit data
Geometry
Numbers for sizing and ride feel.
| Size | SM | MD | LG | XL |
|---|---|---|---|---|
| Stack Reach Ratio | 1.421 mm | 1.478 mm | 1.437 mm | 1.393 mm |
| Bottom Bracket Height | 343 mm | 345 mm | 345 mm | 345 mm |
| Front Center | 656 mm | 690 mm | 715 mm | 741 mm |
| Rake | 44 mm | 51 mm | 51 mm | 51 mm |
| Trail | 91 mm | 92 mm | 92 mm | 92 mm |
| Stack | 560 mm | 603 mm | 615 mm | 627 mm |
| Reach | 394 mm | 408 mm | 428 mm | 450 mm |
| Top Tube Length | 574 mm | 604 mm | 627 mm | 653 mm |
| Seat Tube Angle | 72 ° | 72 ° | 72 ° | 72 ° |
| Seat Tube Length | 400 mm | 440 mm | 480 mm | 520 mm |
| Head Tube Angle | 68.5 ° | 68.5 ° | 68.5 ° | 68.5 ° |
| Head Tube Length | 97 mm | 110 mm | 122 mm | 134 mm |
| Chainstay Length | 426 mm | 436 mm | 436 mm | 436 mm |
| Wheelbase | 1082 mm | 1125 mm | 1149 mm | 1176 mm |
| Bottom Bracket Drop | 10 mm | 27 mm | 27 mm | 27 mm |
| Standover Height | 791 mm | 835 mm | 863 mm | 891 mm |
| Wheels | 29" | 29" | 29" | 29" |
| Rider Min Height | 158 cm | 168 cm | 178 cm | 186 cm |
| Rider Max Height | 171 cm | 180 cm | 189 cm | 199 cm |
About this model
Scalpel-Si Hi-MOD 1 is a Cannondale Scalpel Si model. Cannondale released 69 bikes variations of this model so far. You can get a glimpse at all models from 2020, by clicking on this link.
Model range prices
Cannondale Scalpel-Si 5 2020 is the most economical model, with a starting price of 3150$. Cannondale Scalpel-Si Hi-Mod World Cup 2020 on the other hand costs 11000$, and is the most expensive model.
Safety
Take safety seriously when you ride your bike, and always wear your helmet. Moreover, don’t ride on the sidewalk. This is actually against the law in some states and can be dangerous for both you and pedestrians.
Crosscountry bikes average price
If you want an acceptable Crosscountry bike you should know that the average price is 1905$. However, even if your budget is less than the average, you might still be able to get a top-quality Crosscountry bike. In short, before purchasing your ideal bike do some research about its components, and also check for reviews online.
At the moment of the release date, Cannondale Scalpel-Si Hi-MOD 1 price was 8800$. Comparing the average cost of a Crosscountry bike to this one, you will see that Scalpel-Si Hi-MOD 1 price is 361.94% higher.
Average weight for Crosscountry bikes
Crosscountry bikes weigh an average of 12.4 kg (27.34 lbs). A lighter bike will give you some extra advantage when climbing. A heavier bike will have more speed for descents.
Scalpel-Si Hi-MOD 1 weighs 10.2 kg (22.49 lbs) and is much lighter than the average. In short, the average Crosscountry bike weight is 21.57% higher than this one.
Overview of components
Fork
Cannondale Scalpel-Si Hi-MOD 1 2020 bike is equipped with the Cannondale Lefty Ocho Carbon fork, and has 100mm travel. Bike forks absorb the shocks and give you a smooth and pleasant ride. In short, make sure you choose one with a decent fork when you purchase your dream bike.
Fork material
Scalpel-Si Hi-MOD 1 has a carbon fork, so, its weight is considerably lighter than one made out of steel. However, they cost a bit more than steel forks.
Rear Shock
The shock that’s installed on this bike is Fox Float Factory DPS EVOL, with a travel distance of 100mm. Bike rear shocks are a great way to increase comfort on the bike and give you more control when riding on technical trails. In conclusion, to increase your riding experience, get a bike with a rear shock if possible.
Wheels
When leaving the production line, the Scalpel-Si Hi-MOD 1 model has 29″ carbon wheels. These wheels are more forgiving when you go over roots, rocks, bumps, or other obstacles you encounter on your ride. However, 29″ wheels will make your bike react slower to obstacles you may encounter.
Brakes
Stopping the bike when needed, it’s essential for your safety. This bike has Hydraulic Disc brakes. Hydraulic disc brakes are perfect for mountain biking, road cycling, and commuting. To sum up, these are ideal for anyone.
Sizes
There are 4 sizes available for this model. Rider height can be anywhere between 158 cm – 199 cm (5.18 ft – 6.53 ft). In conclusion, finding one for you shouldn’t be a problem.