Kona Process 153 CR/DL 27.5 2018
2018 Mountain
Estimate price |
5,999$
Weight | 14.29 kg 
Bike details
Overview
Key information split into simple groups.
Bike summary
-
-
Frame Carbon -
Wheels 27.5" -
Travel Front 160mm -
Travel Rear 153mm -
Fork RockShox Lyrik
-
Groupset X01, GX -
Suspension Full -
Drivetrain 1 × 12 -
Brakes Hydraulic Disc
Sizing
Recommended size guide.
SM
152cm - 170cm
MD
157cm - 182cm
LG
175cm - 195cm
XL
180cm - 195cm
Parts list
Components
Main components, grouped by system.
Bike components
Frame
Frame
Kona DH Carbon w/ 6061 Aluminum chain stays 153mm Travel
Suspension Fork
RockShox Lyrik RCT3 Solo Air 160mm Tapered 110mm Spacing
Rear Shock
RockShox Super Deluxe RCT Trunnion
Drivetrain
Rear Derailleur
SRAM X01-Eagle
Front Derailleur
n/a
Shift Levers
SRAM GX-Eagle
Cassette
SRAM X01-Eagle 10-50t 12spd
Crank
SRAM Descendant Carbon, 34t X-Sync Eagle
Bottom Bracket
SRAM GXP PF92
Chain
SRAM GX-Eagle
Chain Guide
n/a
Pedals
n/a
Wheels
Front Hub
SRAM S900 110x15mm
Rear Hub
SRAM S900 148x12mm
Rims
WTB Asym i29 TCS
Spokes
Stainless Black 14g
Tires
Maxxis Minion DHF EXO TR 3C 27.5x2.5"
Brakes
Brakes
SRAM Guide RSC
Brake Levers
SRAM Guide RSC
Disk Rotors
SRAM Centerline 200mm
Cockpit
Stem
Kona XC/BC 35
Handlebar
Kona XC/BC 35
Grips
ODI Elite Flow
Headset
FSA No.57EP
Seat
Saddle
WTB Volt Race (Race 250 size S)
Seatpost
Rock Shox Reverb w/Plunger Lever 31.6mm
Fit data
Geometry
Numbers for sizing and ride feel.
| Size | SM | MD | LG | XL |
|---|---|---|---|---|
| Stack Reach Ratio | 1.41 mm | 1.35 mm | 1.3 mm | 1.22 mm |
| Bottom Bracket Height | 348 mm | 348 mm | 348 mm | 348 mm |
| Front Center | 735 mm | 762 mm | 791 mm | 830 mm |
| Rake | 42 mm | 42 mm | 42 mm | 42 mm |
| Trail | 111 mm | 112 mm | 112 mm | 112 mm |
| Stack | 604 mm | 609 mm | 618 mm | 627 mm |
| Reach | 427 mm | 452 mm | 477 mm | 512 mm |
| Top Tube Length | 575 mm | 602 mm | 631 mm | 670 mm |
| Seat Tube Angle | 76 ° | 76 ° | 76 ° | 76 ° |
| Seat Tube Length | 385 mm | 410 mm | 450 mm | 485 mm |
| Head Tube Angle | 66 ° | 66 ° | 66 ° | 66 ° |
| Head Tube Length | 115 mm | 120 mm | 130 mm | 140 mm |
| Chainstay Length | 427 mm | 427 mm | 427 mm | 427 mm |
| Wheelbase | 1162 mm | 1189 mm | 1218 mm | 1257 mm |
| Bottom Bracket Drop | 10 mm | 10 mm | 10 mm | 10 mm |
| Standover Height | 707 mm | 706 mm | 706 mm | 705 mm |
| Wheels | 27" | 27" | 27" | 27" |
| Rider Min Height | 152 cm | 157 cm | 175 cm | 180 cm |
| Rider Max Height | 170 cm | 182 cm | 195 cm | 195 cm |
About this model
Process 153 CR/DL 27.5 is a Kona Process 153 model. There are 42 bikes that carry this model name. Check out the entire range from 2018 of this model, by clicking this link.
Model range prices
Kona Process 153 SE 2018 is the most economical model, with a starting price of 2199$. Kona Process 153 CR/DL 27.5 2018 on the other hand costs 5999$, and is the most expensive model.
Safety
When cycling always take safety very seriously. Wear a helmet, obey the traffic rules and wear hi-vis clothes. In short, take care of yourself so others can take care of you.
Enduro bikes average price
According to our math, the average price for a trustworthy Enduro bike is 3599$. However, you could also get a good Enduro bike even if you pay a lower amount than the average price. In short, before purchasing your ideal bike do some research about its components, and also check for reviews online.
Furthermore, this bike was made available in 2018 for 5999$. Comparing the average cost of an Enduro bike to this one, you will see that Process 153 CR/DL 27.5 price is 66.69% higher.
Enduro bikes average weight
On a deeper look, we notice that the average weight of an Enduro bike is 14.27 kg (31.46 lbs). You will have a greater advantage on climbs if your bike is easier than the average. On descents, however, a heavier bike will give you extra speed.
Weighing 14.29 kg (31.5 lbs), the Process 153 CR/DL 27.5 model is slightly heavier than average. In short, the average Enduro bike weight is 0.14% lower than this one.
Overview of components
Fork
This bike has the RockShox Lyrik fork installed. The fork’s travel is 160mm. Bike forks are great for shock absorption and provide you with a smooth ride. To sum it all, when buying a bike, ensure that you look for a fork capable of decent travel.
Rear Shock
The Process 153 CR/DL 27.5 has a rear shock with a travel of 153mm. The model RockShox Super Deluxe RCT Trunnion is the one installed in this bike. Bike rear shocks increase the riding comfort, and also give you more control over technical trails. In short, if you want smooth rides, get a full-suspension bicycle.
Wheels
When leaving the production line, the Process 153 CR/DL 27.5 model has 27.5″ aluminum wheels. 27.5″ wheels will reach higher speeds than smaller-sized wheels. However, the 27.5″ wheels are less forgiving than the 29″ wheels.
Brakes
Nothing is more important on a bike than its ability to brake properly. Kona Process 153 CR/DL 27.5 is equipped with Hydraulic Disc brakes. With Hydraulic Disc brakes, you’ll be able to stop on a dime, even in wet or icy conditions. To sum up, you can ride your bike with confidence.
Sizes
This bike is available in 4 sizes. They vary from 152 cm – 195 cm (4.99 ft – 6.4 ft). In short, it won’t be difficult to find the right one for you.
Dropper post
A dropper post is included with the Process 153 CR/DL 27.5. If you are a technical rider, a dropper post is essential. A dropper post provides increased safety while riding. The lever system, allows you to move your saddle up and down, which is very useful on climbs and descends.