Bike details
Overview
Key information split into simple groups.
Bike summary
-
-
Frame Carbon -
Wheels 29" -
Travel Front 160mm -
Travel Rear 160mm -
Fork Fox Factory Float 36
-
Groupset XTR -
Suspension Full -
Drivetrain 1 × 12 -
Brakes Hydraulic Disc
Sizing
Recommended size guide.
SM
158cm - 171cm
MD
168cm - 180cm
LG
178cm - 189cm
XL
186cm - 199cm
Parts list
Components
Main components, grouped by system.
Bike components
Frame
Frame
Carbon Fiber
Suspension Fork
FOX Float 36 Factory, FIT2, 3-Position, High and Low Speed Compression Adjustment, Rebound Adjustment, 110x15mm Boost Spacing, 51mm Offset
Rear Shock
FOX Float X2 Factory, 200x57mm, High and Low Speed Compression Adjustment, High and Low Speed Rebound Adjustment, Custom Tune, Custom Decals, 25.4mm x M8 Upper Hardware, Custom Lower Hardware
Drivetrain
Rear Derailleur
Shimano XTR, RD-M9100-SGS, Long Cage, Shadow Plus Design
Front Derailleur
N/A
Shift Levers
Shimano XTR, SL-M9100-IR, 12-Speed, I-Spec EV
Cassette
Shimano XTR CS-M9100, 12-Speed, 10-51 Tooth
Crank
Shimano XTR, FC-M9120-1, Size S: 170mm Length, All Other Sizes: 175mm Length
Bottom Bracket
Shimano XTR PF92
Chain
Shimano XTR, CN-M9100 with Quick Link
Chain Guide
e*thirteen TRS+
Pedals
N/A
Wheels
Front Hub
Front: Shimano XTR, Alloy Body, Cartridge Bearings, 110mm x 15mm E-Thru Axle, Rear: Shimano XTR Scylence, Alloy Body, Cartridge Bearings, 148mm x 12mm E-Thru Axle, XTR Freehub Body
Rear Hub
Front: Shimano XTR, Alloy Body, Cartridge Bearings, 110mm x 15mm E-Thru Axle, Rear: Shimano XTR Scylence, Alloy Body, Cartridge Bearings, 148mm x 12mm E-Thru Axle, XTR Freehub Body
Rims
e*thirteen TRS Race, Carbon Fiber, 28 Hole, 31mm Inner, Hookless, Tubeless Ready
Spokes
The Hive Triple-Butted, Black, J-Bend
Tires
Front: e*thirteen TRS Race, 29"x2.35", Race Compound, Aramid Reinforced, 72 TPI, Rear: e*thirteen TRS Plus, 29"x2.35", Plus Compound, 72 TPI
Brakes
Brakes
Shimano XTR Enduro M9120 Hydraulic Disc, 203mm Rotors
Brake Levers
Shimano XTR BLM9120
Cockpit
Stem
Deity Copperhead, 35mm Length
Handlebar
Deity DC31 Mohawk Carbon, 787mm Width, 15mm Rise
Grips
Marin Locking
Headset
FSA Orbit, No. 42/47/ACB/S-4, Sealed Cartridge Bearings
Seat
Saddle
WTB Volt Race, Ti Rails
Seatpost
FOX Transfer Performance Elite, Anodized Black, with 1x Lever, Size S: 125mm Travel, All Other Sizes: 150mm Travel
Fit data
Geometry
Numbers for sizing and ride feel.
| Size | SM | MD | LG | XL |
|---|---|---|---|---|
| Stack Reach Ratio | 1.5 mm | 1.43 mm | 1.37 mm | 1.38 mm |
| Bottom Bracket Height | 336 mm | 336 mm | 336 mm | 336 mm |
| Stack | 633.5 mm | 633.5 mm | 642.8 mm | 665.6 mm |
| Reach | 422 mm | 442 mm | 469.2 mm | 482.8 mm |
| Top Tube Length | 582 mm | 602 mm | 627 mm | 644.6 mm |
| Seat Tube Angle | 73.5 ° | 73.5 ° | 73.5 ° | 73.5 ° |
| Seat Tube Length | 390 mm | 420 mm | 465 mm | 525 mm |
| Head Tube Angle | 66.5 ° | 66.5 ° | 66.5 ° | 66.5 ° |
| Head Tube Length | 90 mm | 90 mm | 100 mm | 125 mm |
| Chainstay Length | 442 mm | 442 mm | 442 mm | 442 mm |
| Wheelbase | 1161 mm | 1181 mm | 1213 mm | 1236 mm |
| Bottom Bracket Drop | 38 mm | 38 mm | 38 mm | 38 mm |
| Standover Height | 708 mm | 718 mm | 761 mm | 807 mm |
| Wheels | 29" | 29" | 29" | 29" |
| Rider Min Height | 158 cm | 168 cm | 178 cm | 186 cm |
| Rider Max Height | 171 cm | 180 cm | 189 cm | 199 cm |
About this model
Wolf Ridge Pro is a Marin Wolf model. 12 bikes variations carry this model name so far. Check out the entire range from 2019 of this model, by clicking this link.
Model range prices
Marin Wolf Ridge 8 2019 is the most economical model, with a starting price of 5299$. Marin Wolf Ridge Pro 2019 on the other hand costs 8899$, and is the most expensive model.
Safety
When cycling always take safety very seriously. Wear a helmet, obey the traffic rules and wear hi-vis clothes. In short, take care of yourself so others can take care of you.
Average price for Enduro bikes
Our math shows that the average cost of a dependable Enduro bike is 3599$. However, even though the average price of an Enduro bike is lower, you might still be able to get a top-quality bike. To make sure you don’t pay a higher amount than normal for your bike, always do some components analysis and read reviews.
This bike was released in 2019 and its price was 8899$. Comparing the average cost of an Enduro bike to this one, you will see that Wolf Ridge Pro price is 147.26% more expensive.
Overview of components
Fork
Marin Wolf Ridge Pro 2019 bike is equipped with the Fox Factory Float 36 fork, and has 160mm travel. Bike forks are great for shock absorption and provide you with a smooth ride. In short, make sure you choose one with a decent fork when you purchase your dream bike.
Rear Shock
The shock that’s installed on this bike is FOX Float X2 Factory, with a travel distance of 160mm. Bike rear shocks are a great way to increase comfort on the bike and give you more control when riding on technical trails. In short, if you want smooth rides, get a full-suspension bicycle.
Wheels
When leaving the production line, the Wolf Ridge Pro model has 29″ carbon wheels. Having 29″ wheels means that you need less fork travel, leading to a reduction of the pedal bob effect. However, 29″ wheels will make your bike react slower to obstacles you may encounter.
Brakes
We ride faster and faster, so a good braking system is essential on a bike nowadays. The Wolf Ridge Pro comes with Hydraulic Disc brakes. Hydraulic disc brakes provide amazing stopping power, no matter what the terrain. To sum up, these are ideal for anyone.
Sizes
This bike is available in 4 sizes. They vary from 158 cm – 199 cm (5.18 ft – 6.53 ft). In conclusion, it won’t take much to find one that’s right for you.
Dropper post
The Marin model is also equipped with a dropper post. A dropper post is a must-have these days if you’re riding anything remotely technical. The main benefit of a dropper post is increased safety while riding. As mentioned above, the lever system allows you to quickly move the saddle out of the way when approaching descents or trail obstacles.