Bike details
Overview
Key information split into simple groups.
Bike summary
-
-
Frame Aluminum -
Wheels 26" -
Travel Front 100mm -
Fork RST
-
Suspension Hardtail -
Brakes Rim
Parts list
Components
Main components, grouped by system.
Bike components
Frame
Frame
Aluminum
Suspension Fork
RST Dirt RA, 10mm axle
Rear Shock
N/A
Drivetrain
Rear Derailleur
N/A
Front Derailleur
N/A (1x-specific)
Shift Levers
N/A
Cassette
14 tooth freewheel
Crank
Salt by WTP, tubular cromoly
Bottom Bracket
Octane One external, 73mm, threaded
Chain
PYC-410H, 1-speed
Chain Guide
N/A
Pedals
NS Nylon
Wheels
Front Hub
Front: Joytech 9mm, Rear: Joytech Single Speed
Rear Hub
Front: Joytech 9mm, Rear: Joytech Single Speed
Rims
Jalco DBX 32-hole front, NS Fundamental 32-hole rear
Spokes
14mm nipples
Tires
Kenda Small Block 8, 26" x 2.1"
Brakes
Brakes
Tektro Novela 160mm disc rear, Alhonga v-brake front
Brake Levers
Tektro Novela rear, Alhonga front
Cockpit
Stem
NS Chemical, 25.4mm clamp
Handlebar
NS Lick, 740mm width
Grips
NS Sam Pilgrim signature, without flanges
Headset
GW integrated, tapered IS42/52, sealed bearings
Seat
Saddle
Octane One fat seat/post combo
Seatpost
Octane One fat seat/post combo
Fit data
Geometry
Numbers for sizing and ride feel.
| Size | One Size |
|---|---|
| Stack Reach Ratio | 1.44 mm |
| Bottom Bracket Height | 318 mm |
| Front Center | 653 mm |
| Rake | 42 mm |
| Trail | 87 mm |
| Stack | 577 mm |
| Reach | 400 mm |
| Top Tube Length | 588 mm |
| Seat Tube Angle | 72 ° |
| Seat Tube Length | 335 mm |
| Head Tube Angle | 69 ° |
| Head Tube Length | 115 mm |
| Chainstay Length | 388 mm |
| Wheelbase | 1040 mm |
| Bottom Bracket Drop | 25 mm |
| Standover Height | 741 mm |
| Wheels | 26" |
| Rider Min Height | 120 cm |
Model Overview
Movement 3 is a Ns Movement model. NS released 22 bikes variations of this model so far. Take a sneak peek at all Ns Movement bikes models from 2018, by clicking here.
Safety
Make sure you wear a helmet on every ride, and that your bike performs well. In short, this means checking the tires, brakes, and chain to make sure everything is in good working order.
Average price for Dirt Jump bikes
According to our calculations, the average cost of a Dirt Jump bike that is reliable is 863$. However, even though the average price of a Dirt Jump bike is lower, you might still be able to get a top-quality bike. To make sure you don’t pay a higher amount than normal for your bike, always do some components analysis and read reviews.
Average weight for Dirt Jump bikes
The average weight for Dirt Jump bikes is 12.37 kg (27.27 lbs). An easier bike will give you a big advantage in climbs. However, a heavier bike can gain speed when you descend.
Weighing 13.1 kg (28.88 lbs), the Movement 3 model is a bit heavier than average. To sum up, it’s 5.9% heavier than the average weight of Dirt Jump bikes.
Overview of components
Fork
This bike has the RST fork installed. The fork’s travel is 100mm. Bike forks absorb the shocks and give you a smooth and pleasant ride. To sum up, when buying a bicycle, make sure you get a fork that is capable of delivering decent travel.
Wheels
When leaving the production line, the Movement 3 model has 26″ aluminum wheels. The 26″ wheels are lighter than the 27.5 or 29″ wheels. However, you will need increased suspension than in the case of 29″ wheels.
Brakes
Nothing is more important on a bike than its ability to brake properly. NS Movement 3 is equipped with Rim brakes. Slightly lighter than hydraulic brakes, rim brakes are a budget choice. However, they have problems in wet conditions.