NS Movement 3 2020
Bike details
Key information split into simple groups.
Bike summary
-
-
Frame Aluminum
-
Wheels 26"
-
Travel Front 100mm
-
Fork RST
-
Suspension Hardtail
-
Brakes Rim
Parts list
Main components, grouped by system.
Bike components
Frame
Frame
NS Bikes AL6061-T6 custom formed and butted tubes, tapered integrated headset
Suspension Fork
Rst Dirt T, 100mm travel, 9mm axle, 1&1/8” steerer tube
Rear Shock
/
Drivetrain
Rear Derailleur
/
Front Derailleur
N/A
Shift Levers
/
Cassette
/
Crank
Salt by WTP tubular chromoly 25T steel ring
Bottom Bracket
Octane One external, w/Spanish bearings
Chain
PYC-510HX, 1spd
Chain Guide
N/A
Pedals
NS Nylon
Wheels
Front Hub
Joytech 9mm bolt-on
Rear Hub
NS Single Speed, 10T driver
Rims
Jalco DBX 26”, NS Fundamental 26”, 32h
Spokes
Spokes w/14mm nipples
Tires
Kenda Small Block 8 26x2.1
Brakes
Brakes
Alhonga v-brake
Brake Levers
Tektro
Cockpit
Stem
NS Chemical 25.4
Handlebar
NS Lick, 740mm
Grips
NS Hold Fast Unlocked
Headset
GW integrated IS42/IS52, sealed bearings
Seat
Saddle
Octane One fat seat-post combo
Seatpost
Octane One fat seat-post combo
Fit data
Numbers for sizing and ride feel.
| Size | One Size |
|---|---|
| Stack Reach Ratio | 1.44 mm |
| Bottom Bracket Height | 318 mm |
| Front Center | 653 mm |
| Rake | 42 mm |
| Trail | 87 mm |
| Stack | 577 mm |
| Reach | 400 mm |
| Top Tube Length | 588 mm |
| Seat Tube Angle | 72 ° |
| Seat Tube Length | 335 mm |
| Head Tube Angle | 69 ° |
| Head Tube Length | 115 mm |
| Chainstay Length | 388 mm |
| Wheelbase | 1040 mm |
| Bottom Bracket Drop | 25 mm |
| Standover Height | 741 mm |
| Wheels | 26" |
| Rider Min Height | 120 cm |
Model Overview
Movement 3 belongs to the Ns Movement model. NS released 22 bikes variations of this model so far. Check out the entire range from 2020 of this model, by clicking this link.
Model range prices
NS Movement 3 2020 is the cheapest bike model and costs 849$. NS Movement 1 2020 is the most expensive one and costs 1399$.
Safety
Your safety should be the top priority when you go for a ride. In short, make sure that you always use a helmet, high visibility clothing, and proper lights when riding at night-time.
Average price for Dirt Jump bikes
If you want an acceptable Dirt Jump bike you should know that the average price is 863$. However, you could also get a good Dirt Jump bike even if you pay a lower amount than the average price. In short, before purchasing your ideal bike do some research about its components, and also check for reviews online.
When NS released this model in 2020, its price was 849$. Doing a quick comparison, we notice that Movement 3 price is 1.65% lower than the average cost of a Dirt Jump bike.
Dirt Jump bikes average weight
If we make a quick analysis of the average weight of a Dirt Jump bike, we get 12.37 kg (27.27 lbs). A lighter bike will give you some extra advantage when climbing. A heavier bike will have more speed for descents.
With a weight of 13.15 kg (28.99 lbs), NS bike is a bit heavier than average. In conclusion, the average Dirt Jump bike weighs 6.31% less than Movement 3.
Movement 3 components
Fork
The RST is included from the factory. It has a travel distance of 100mm. Bike forks are good shock absorbers and provide a smooth ride and a great experience. In conclusion, always look for a fork with decent travel when you buy a bike.
Wheels size
The Movement 3 2020 bike is equipped with 26″ aluminum wheels when leaving the factory. Being a little smaller, these wheels will fit both small and tall riders. However, they are less forgiving when riding over obstacles such as bumps and roots.
Brakes
Nothing is more important on a bike than its ability to brake properly. NS Movement 3 is equipped with Rim brakes. Rim brakes deliver an average performance overall. However, they have problems in wet conditions.
