Polygon Vander N7 2021
2021 Mountain
Estimate price |
2,399$
Weight | 15.9 kg 
Bike details
Overview
Key information split into simple groups.
Bike summary
-
-
Frame Aluminum -
Wheels 29" -
Travel Front 160mm -
Travel Rear 150mm -
Fork RockShox Yari RC
-
Groupset NX -
Suspension Full -
Drivetrain 1 × 12 -
Brakes Hydraulic Disc
Sizing
Recommended size guide.
SM
154cm - 169cm
MD
166cm - 179cm
LG
176cm - 187cm
XL
184cm - 195cm
Parts list
Components
Main components, grouped by system.
Bike components
Frame
Frame
ALX Trail 6061 Aluminium Frame, 150mm Travel, Tapered Headtube, 73mm Threaded Boost BB, 148x12mm Thru-Axle
Suspension Fork
RockShox Yari SC 160mm Travel (29"), Air Spring, Preload Adjuster, External Rebound, Low Speed Compression, 15x110mm Boost
Rear Shock
RockShox Deluxe Select R, Air Sping, External Rebound, 230x62.5mm
Drivetrain
Rear Derailleur
SRAM NX 12-Speed Direct Attached
Shift Levers
SRAM NX 12-Speed, MatchMaker X Clamp
Cassette
SRAM CS PG-1210 Eagle 12-Speed, 11-50T
Crank
SRAM NX, 32T, 170mm
Bottom Bracket
SRAM DUB Threaded
Chain
SRAM SX 12-Speed
Pedals
Flat PP
Wheels
Front Hub
Alloy Hub 32H, 6-Bolt, F: 15x100mm / R: 12x148mm
Rear Hub
Alloy Hub 32H, 6-Bolt, F: 15x100mm / R: 12x148mm
Rims
WTB STi29 (29"), TCS, 32H, Pinned Joint *
Spokes
Entity Stainless, Brass Nipple, F: 294mm R: 292mm/294mm
Tires
Vee Flow Snap 29x2.6", Folding Bead, Tackle Compound, Tubeless Ready
Brakes
Brakes
SRAM Guide RE Hydraulic Disc, 4-Piston
Cockpit
Stem
Entity Xpert, Alloy, 35mm Barbore, 45mm Ext, 0 Degree
Handlebar
Raceface Chester, Alloy, 35m Barbore, 780mm Width, 20mm Rise, 0 Degree Back Sweep
Headset
FSA No.57E Orbit 1.5E Zero Stack (Zs) Sealed Bearing, ZS 44/28.6 | ZS 56/40
Seat
Saddle
Entity MTB
Seatpost
KS Rage-I, 30.9mm, 0mm Offset
Fit data
Geometry
Numbers for sizing and ride feel.
| Size | SM | MD | LG | XL |
|---|---|---|---|---|
| Stack Reach Ratio | 1.39 mm | 1.34 mm | 1.29 mm | 1.25 mm |
| Bottom Bracket Height | 343 mm | 343 mm | 343 mm | 343 mm |
| Front Center | 775 mm | 797 mm | 820 mm | 842 mm |
| Rake | 46 mm | 45 mm | 46 mm | 46 mm |
| Trail | 128 mm | 129 mm | 128 mm | 128 mm |
| Stack | 621 mm | 626 mm | 631 mm | 635 mm |
| Reach | 448 mm | 468 mm | 488 mm | 508 mm |
| Top Tube Length | 600 mm | 623 mm | 646 mm | 669 mm |
| Seat Tube Angle | 70 ° | 70 ° | 70 ° | 70 ° |
| Seat Tube Length | 420 mm | 440 mm | 460 mm | 480 mm |
| Head Tube Angle | 64.5 ° | 64.5 ° | 64.5 ° | 64.5 ° |
| Head Tube Length | 95 mm | 100 mm | 105 mm | 110 mm |
| Chainstay Length | 448 mm | 448 mm | 448 mm | 448 mm |
| Wheelbase | 1221 mm | 1243 mm | 1266 mm | 1288 mm |
| Bottom Bracket Drop | 34 mm | 34 mm | 34 mm | 34 mm |
| Standover Height | 788 mm | 786 mm | 786 mm | 788 mm |
| Front Travel | 160 mm | 160 mm | 160 mm | 160 mm |
| Rear Travel | 150 mm | 150 mm | 150 mm | 150 mm |
| Wheels | 29" | 29" | 29" | 29" |
| Rider Min Height | 154 cm | 166 cm | 176 cm | 184 cm |
| Rider Max Height | 169 cm | 179 cm | 187 cm | 195 cm |
Model Overview
Vander N7 belongs to the Polygon Vander model. Polygon launched 4 bikes of this model so far. Take a sneak peek at all Polygon Vander bikes models from 2021, by clicking here.
Model range prices
Polygon Vander T7 2021 is the cheapest bike model and costs 1699$. Polygon Vander N7 2021 is the most expensive one and costs 2399$.
Safety
Take safety seriously when you ride your bike, and always wear your helmet. Moreover, don’t ride on the sidewalk. This is actually against the law in some states and can be dangerous for both you and pedestrians.
Average price for Enduro bikes
According to our calculations, the average cost of an Enduro bike that is reliable is 3599$. However, this doesn’t mean that if you spend less money on an Enduro bike, you couldn’t get a decent one. To sum up, when you purchase your bike, make sure to check if it has reviews, and also do some components research.
Furthermore, this bike was made available in 2021 for 2399$. Comparing this to the average Enduro bike price, we see that the price is 50.02% lower.
Average weight for Enduro bikes
On a deeper look, we notice that the average weight of an Enduro bike is 14.27 kg (31.46 lbs). You will have a greater advantage on climbs if your bike is easier than the average. On descents, however, a heavier bike will give you extra speed.
Polygon Vander N7 it’s weighing 15.9 kg (35.05 lbs). At this weight, is considerably heavier than average. In short, the average Enduro bike weight is 11.42% lower than this one.
Vander N7 components
Fork
The RockShox Yari RC is included from the factory. It has a travel distance of 160mm. Bike forks are great for shock absorption and provide you with a smooth ride. In short, you should always ensure you have a good fork when purchasing a bike.
Rear Shock
The Vander N7 has a rear shock with a travel of 150mm. The model RockShox Deluxe Select R is the one installed in this bike. Rear shocks improve riding comfort and give you greater control over all terrains. In short, a full-suspension bike will give you the smoothest ride possible.
Wheels size
The wheels on Vander N7 are the 29″ aluminum type. Having 29″ wheels means that you need less fork travel, leading to a reduction of the pedal bob effect. However, the 29″ wheels will add a little more weight to the bike itself.
Brakes
We ride faster and faster, so a good braking system is essential on a bike nowadays. The Vander N7 comes with Hydraulic Disc brakes. Hydraulic disc brakes are perfect for mountain biking, road cycling, and commuting. To sum up, your safety is in good hands.
Sizes
This bike is available in 4 sizes. They vary from 154 cm – 195 cm (5.05 ft – 6.4 ft). In conclusion, it won’t take much to find one that’s right for you.
Dropper post
Polygon Vander N7 includes a dropper post. If you are a technical rider, a dropper post is essential. A dropper post provides increased safety while riding. The lever system, allows you to move your saddle up and down, which is very useful on climbs and descends.