Rocky Mountain Slayer Alloy 50 2021
2021 Mountain
Estimate price |
4,599$
Weight | 17.15 kg 
Bike details
Overview
Key information split into simple groups.
Bike summary
-
-
Frame Aluminum -
Wheels 27.5" / 29" -
Travel Front 180mm -
Travel Rear 180mm -
Fork Fox Performance Float 38
-
Groupset XT, SLX -
Suspension Full -
Brakes Hydraulic Disc
Sizing
Recommended size guide.
SM
158cm - 171cm
MD
168cm - 180cm
MD
168cm - 180cm
LG
178cm - 189cm
XL
186cm - 199cm
Parts list
Components
Main components, grouped by system.
Bike components
Frame
Frame
FORM™ Alloy. Full Sealed Cartridge Bearings. Press Fit BB92. Internal Cable Routing. 2-Bolt ISCG05 Tabs. RIDE-4™ Adjustable Geometry + Suspension Rate. 29: 170mm Travel / 27.5: 180mm Travel. FORM™ Alloy Rear Triangle
Suspension Fork
Fox 38 Float EVOL GRIP Performance Series | 27.5 = 180mm, 37mm Offset | 29 = 180mm, 44mm Offset
Rear Shock
Fox DHX2 Performance | Steel Spring | Sealed Bearing Eyelet | 25x8mm F Hardware | All Sizes = 230x65mm | Size-Specific tune in FAQ
Drivetrain
Rear Derailleur
Shimano XT
Shift Levers
Shimano SLX
Cassette
Shimano SLX 10-51T
Crank
Race Face Aeffect Cinch | 27.5 = 34T | 29 = 32T | 24mm Spindle | 170mm Crank Length
Bottom Bracket
Shimano SM-BBMT500
Chain
Shimano M7100
Wheels
Front Hub
Rocky Mountain Sealed Boost 15mm
Rear Hub
DT Swiss 370 Boost 148mm | RMB Axle | 163mm x 12mm x 1.5mm
Rims
WTB ST i30 TCS 2.0 Tubeless | Tubeless Ready - Tape | Valves Incl | 32H
Spokes
DT Swiss Champion 2.0
Tires
F: Maxxis Minion DHF 2.5 WT 3C MaxxGrip DD Tubeless Ready // R: Maxxis Minion DHR II 2.4 WT 3C MaxxGrip DD Tubeless Ready
Brakes
Brakes
Shimano SLX Trail 4 Piston | Metal Pads | RT66 203mm F Rotor | RT66 203mm R Rotor
Cockpit
Stem
Rocky Mountain 35 AM | 5° Rise | All Sizes = 40m
Handlebar
Rocky Mountain AM | 780mm Width | 27.5 = 38mm Rise | 29 = 25mm Rise | 9° Backsweep | 5° Upsweep | 35mm Clamp
Grips
Ergon GD10 EVO Lock On
Headset
FSA Orbit NO.57E | 36°x45° Bearings | 30.2mm x 41mm x 7.1mm Upper | 40mm x 51.8mm x 7.5mm Lower | 1.5" Crown Race
Seat
Saddle
WTB Volt Race | Cromoly Rails | 142mm Width
Seatpost
Race Face Aeffect R Dropper 30.9mm | Shimano MT500 Remote | SM = 125mm | MD = 150mm | LG - XL = 175mm
Fit data
Geometry
Numbers for sizing and ride feel.
| Size | SM | MD | MD | LG | XL |
|---|---|---|---|---|---|
| Stack Reach Ratio | 1.42 mm | 1.35 mm | 1.43 mm | 1.39 mm | 1.33 mm |
| Bottom Bracket Height | 337 mm | 337 mm | 347 mm | 347 mm | 347 mm |
| Front Center | 750 mm | 775 mm | 791 mm | 820 mm | 857 mm |
| Rake | 43 mm | 41 mm | 44 mm | 43 mm | 42 mm |
| Trail | 126 mm | 129 mm | 140 mm | 141 mm | 142 mm |
| Stack | 592 mm | 597 mm | 622 mm | 636 mm | 650 |
| Reach | 416 mm | 441 mm | 436 mm | 459 mm | 490 mm |
| Top Tube Length | 571 mm | 595 mm | 601 mm | 626 mm | 661 mm |
| Seat Tube Angle | 75.4 ° | 75.4 ° | 75.2 ° | 75.2 ° | 75.2 ° |
| Seat Tube Length | 380 mm | 420 mm | 420 mm | 445 mm | 480 mm |
| Head Tube Angle | 63.9 ° | 63.9 ° | 63.2 ° | 63.2 ° | 63.2 ° |
| Head Tube Length | 90 mm | 95 mm | 95 mm | 110 mm | 125 mm |
| Chainstay Length | 428 mm | 428 mm | 440 mm | 440 mm | 440 mm |
| Wheelbase | 1177 mm | 1202 mm | 1230 mm | 1259 mm | 1296 mm |
| Bottom Bracket Drop | 18 mm | 18 mm | 27 mm | 27 mm | 27 mm |
| Standover Height | 803 mm | 803 mm | 829 mm | 829 mm | 829 mm |
| Wheels | 27" | 27" | 29" | 29" | 29" |
| Rider Min Height | 158 cm | 168 cm | 168 cm | 178 cm | 186 cm |
| Rider Max Height | 171 cm | 180 cm | 180 cm | 189 cm | 199 cm |
About this model
Slayer Alloy 50 belongs to the Rockymountain Slayer model. 64 bikes variations carry this model name so far. Check out the entire range from 2021 of this model, by clicking this link.
Model range prices
Rocky Mountain Slayer Alloy 30 2021 is the cheapest bike model and costs 3759$. Rocky Mountain Slayer Carbon 90 2021 is the most expensive one and costs 8359$.
Safety
Your safety is a top priority so always wear a helmet when you ride your bike. Moreover, wear the right clothing. You want to be visible to other drivers, so avoid wearing dark clothing.
Average price for Enduro bikes
Our math shows that the average cost of a dependable Enduro bike is 3599$. However, paying less money than this amount doesn’t mean that you couldn’t get a great Enduro bike. To make sure you don’t pay a higher amount than normal for your bike, always do some components analysis and read reviews.
This bike was released in 2021 and its price was 4599$. If we compare this with the average Enduro bike cost we notice that the price is 27.79% higher.
Enduro bikes average weight
Enduro bikes weigh an average of 14.27 kg (31.46 lbs). An easier bike will give you a big advantage in climbs. However, a heavier bike can gain speed when you descend.
Weighing 17.15 kg (37.81 lbs), the Slayer Alloy 50 model is much heavier than average. In conclusion, the average Enduro bike weighs 20.18% less than Slayer Alloy 50.
Internal Cable Routing
Moreover, this bike comes with internal cable routing allowing you to keep the cables in a good condition. It also makes it look more professional.
Overview of components
Fork
The Fox Performance Float 38 is included from the factory. It has a travel distance of 180mm. Bike forks absorb the shocks and give you a smooth and pleasant ride. In short, you should always ensure you have a good fork when purchasing a bike.
Rear Shock
The Slayer Alloy 50 has a rear shock with a travel of 180mm. The model Fox DHX2 Performance | Steel Spring is the one installed in this bike. Bike rear shocks are a great way to increase comfort on the bike and give you more control when riding on technical trails. In conclusion, to increase your riding experience, get a bike with a rear shock if possible.
Wheels
When leaving the production line, the Slayer Alloy 50 model has 27.5″ aluminum wheels. The 27.5″ wheels are a great choice for smaller riders. However, the overall traction of 27.5″ wheels is lower than 29″ wheels.
Brakes
For your safety, it is important to have quality breaks on your bike. Rocky Mountain Slayer Alloy 50 has Hydraulic Disc brakes installed. Hydraulic disc brakes are perfect for mountain biking, road cycling, and commuting. To sum up, these are ideal for anyone.
Sizes
There are 5 sizes available for this model. Rider height can be anywhere between 158 cm – 199 cm (5.18 ft – 6.53 ft). In conclusion, finding one for you shouldn’t be a problem.
Dropper post
Rocky Mountain Slayer Alloy 50 includes a dropper post. If you are a technical rider, a dropper post is essential. A dropper post provides increased safety while riding. The lever system, allows you to move your saddle up and down, which is very useful on climbs and descends.