Specialized Enduro Pro 29/6Fattie 2018
Bike details
Key information split into simple groups.
Bike summary
-
-
Frame Carbon
-
Wheels 29"
-
Travel Front 160mm
-
Travel Rear 160mm
-
Fork Öhlins
-
Groupset X01 Eagle, Truvativ Descendant Carbon
-
Suspension Full
-
Drivetrain 1 × 12
-
Brakes Hydraulic Disc
Recommended size guide.
SM
158cm - 171cm
MD
168cm - 180cm
LG
178cm - 189cm
XL
186cm - 199cm
Parts list
Main components, grouped by system.
Bike components
Frame
Frame
FACT 11m, X-Wing layout, full carbon chassis and rear end, All Mountain Geometry, SWAT™ Door integration, threaded BB, fully enclosed internal cable routing, ManFu link, oversized pivot bearings, alloy link & adjustable shock extension, 12x148mm dropouts, replaceable derailleur hanger, 160mm of travel
Suspension Fork
Öhlins RXF 36, 29/6Fattie, Single-Tube design, air spring w/ adjustable 3rd chamber, adjustable low-speed compression, adjustable rebound, 15x110mm thru-axle, 51mm offset, 160mm of travel
Rear Shock
Custom Öhlins STX, Single-Tube design, Rx All Mountain Tune, AUTOSAG, adjustable compression & rebound damping, 216x57mm
Drivetrain
Rear Derailleur
SRAM X01 Eagle, 12-speed
Shift Levers
SRAM X01 Eagle, trigger, 12-speed
Cassette
SRAM X01 Eagle, 12-speed, 10-50t
Crank
Truvativ Descendant, carbon, Boost™ 148, 170mm crankarm, 24mm spindle, Steel, 30T
Bottom Bracket
SRAM GXP, XR 73
Chain
SRAM X01 Eagle, 12-speed w/ PowerLock
Pedals
Specialized Platform, Cr-Mo, 9/16" spindle
Wheels
Front Hub
Specialized, sealed cartridge bearings, 15x110mm spacing, 24h
Rear Hub
DT Swiss 350, Star Ratchet, 36t engagement, SRAM XD driver body, 12mm thru-axle, 148mm spacing, 28h
Rims
Roval Traverse Carbon 29, hookless carbon, 30mm inner width, 24/28h, tubeless ready, hand-built
Spokes
DT Swiss Revolution
Tires
Butcher, GRID casing, Gripton compound, 2Bliss Ready, 29 x 2.3"
Brakes
Brakes
SRAM Code R, 4-piston caliper, hydraulic disc, metallic pads, 200mm rotor
Cockpit
Stem
Specialized Trail, 3D forged alloy, 4-bolt, 6-degree rise
Handlebar
Specialized DH, 7050 alloy, 8-degree backsweep, 6-degree upsweep, 27mm rise, 800mm, 31.8mm clamp
Grips
Specialized Sip Grip, half-waffle, S/M: regular thickness, L/XL: XL thickness
Seat
Saddle
Body Geometry Henge Comp, hollow Cr-Mo rails, 143mm
Seatpost
Command Post IRcc WU, 12-position micro-height adjustable, alien head design, bottom mount cable routing, remote adjust SRL lever, 34.9mm, 150mm of travel
Fit data
Numbers for sizing and ride feel.
| Size | SM | MD | LG | XL |
|---|---|---|---|---|
| Stack Reach Ratio | 1.46 mm | 1.38 mm | 1.34 mm | 1.31 mm |
| Bottom Bracket Height | 346 mm | 346 mm | 346 mm | 346 mm |
| Front Center | 732 mm | 757 mm | 785 mm | 812 mm |
| Rake | 51 mm | 51 mm | 51 mm | 51 mm |
| Trail | 107 mm | 107 mm | 107 mm | 107 mm |
| Stack | 602 mm | 602 mm | 615 mm | 629 mm |
| Reach | 411 mm | 436 mm | 458 mm | 479 mm |
| Top Tube Length | 555 mm | 580 mm | 607 mm | 633 mm |
| Seat Tube Angle | 76.7 ° | 76.7 ° | 76.5 ° | 76.3 ° |
| Seat Tube Length | 396 mm | 430 mm | 467 mm | 521 mm |
| Head Tube Angle | 65.5 ° | 65.5 ° | 65.5 ° | 65.5 ° |
| Head Tube Length | 95 mm | 95 mm | 110 mm | 125 mm |
| Chainstay Length | 429 mm | 429 mm | 429 mm | 429 mm |
| Wheelbase | 1161 mm | 1186 mm | 1214 mm | 1241 mm |
| Bottom Bracket Drop | 19 mm | 19 mm | 19 mm | 19 mm |
| Standover Height | 759 mm | 765 mm | 777 mm | 795 mm |
| Wheels | 29" | 29" | 29" | 29" |
| Rider Min Height | 158 cm | 168 cm | 178 cm | 186 cm |
| Rider Max Height | 171 cm | 180 cm | 189 cm | 199 cm |
About this model
Enduro Pro 29/6Fattie belongs to the Specialized Enduro model. Specialized released 117 bikes variations of this model so far. Check out the entire range from 2018 of this model, by clicking this link.
Model range prices
Specialized Enduro Comp 27.5 2018 is the most economical model, with a starting price of 3200$. Specialized S-Works Enduro 27.5 2018 on the other hand costs 8500$, and is the most expensive model.
Safety
Make sure you wear a helmet on every ride, and that your bike performs well. In short, this means checking the tires, brakes, and chain to make sure everything is in good working order.
Average price for Enduro bikes
If you want to purchase a solid Enduro bike, it is important to know that the average cost is 3599$. However, you could also get a good Enduro bike even if you pay a lower amount than the average price. As a general rule of thumb, you should always read reviews about the bike and its components before buying it to ensure you don’t pay too much.
This bike was released in 2018 and its price was 6500$. In conclusion, this bike price is 80.61% more expensive than the price of the average Enduro bike.
Internal Cable Routing
Another thing to mention, is the internal cable routing of this bike. In conclusion, this helps you too, keep the bike cables in mint condition, and also it looks better. No more cables, surrounding the bike.
Overview of components
Fork
The fork installed on this bike is the Öhlins model. The travel on this model is 160mm. Bike forks are good shock absorbers and provide a smooth ride and a great experience. To sum up, when buying a bicycle, make sure you get a fork that is capable of delivering decent travel.
Rear Shock
From the factory, it comes with the Custom Öhlins STX rear shock model, which has a travel of 160mm. Rear shocks give you increased comfort, control, and traction, which is important when cornering or braking. This allows you to ride faster on bumpy roads. To sum up, always consider getting a bike that has a rear shock as well.
Wheels
As for the wheels, Specialized Enduro Pro 29/6Fattie 2018, has a 29″ carbon model. Having 29″ wheels means that you need less fork travel, leading to a reduction of the pedal bob effect. However, these wheels are not ideal for smaller people.
Brakes
We ride faster and faster, so a good braking system is essential on a bike nowadays. The Enduro Pro 29/6Fattie comes with Hydraulic Disc brakes. These kinds of brakes are among the most popular models used on bikes. To sum up, your safety is in good hands.
Sizes
This bike is available in 4 sizes. They vary from 158 cm – 199 cm (5.18 ft – 6.53 ft). In short, you can easily find one that suits you.
Dropper post
Specialized Enduro Pro 29/6Fattie includes a dropper post. A dropper post is a must-have these days if you’re riding anything remotely technical. The main benefit of a dropper post is increased safety while riding. As mentioned above, the lever system allows you to quickly move the saddle out of the way when approaching descents or trail obstacles.
