Specialized S-Works Turbo Kenevo SL 2022
Bike details
Key information split into simple groups.
Bike summary
-
-
Frame Carbon
-
Wheels 29"
-
Travel Front 170mm
-
Travel Rear 170mm
-
Fork Fox Factory Float 38
-
Groupset XX1 Eagle AXS, X01 Eagle AXS
-
Suspension Full
-
Motor Specialized 240W 35Nm mid-drive
-
Battery Specialized SL1-320, fully integrated, 320Wh
-
Drivetrain 1 × 12 Electronic
-
Brakes Hydraulic Disc
Recommended size guide.
S2
157cm - 172cm
S3
165cm - 180cm
S4
172cm - 188cm
S5
177cm - 193cm
Parts list
Main components, grouped by system.
Bike components
Frame
Frame
FACT 11m full carbon, 29", full internal cable routing, 148mm spacing, fully sealed cartridge bearings, 170mm rear travel, geo adjust head tube, geo adjust horst pivot
Suspension Fork
FOX FLOAT 38 Factory 29, Grip2 damper, 44mm offset, HSC, LSC, HSR, LSR, 110x15mm, 1.5" tapered steerer, 170mm travel, Kashima
Rear Shock
FOX FLOAT X2 Factory, LSC, LSR, 2-position lever, 62.5x230mm, Kashima
Drivetrain
Rear Derailleur
SRAM XX1 Eagle AXS
Shift Levers
SRAM Eagle AXS Rocker Paddle
Cassette
SRAM XG-1299 Eagle, 10-52t
Crank
Praxis Carbon M30, custom offset, SRAM X-Sync Eagle, 94 BCD, 32T, alloy
Chain
SRAM XX1, 12 speed
Wheels
Rims
Front: Traverse SL 29, Rear: Traverse SL 29
Tires
Front: Butcher Grid Trail T9 29x2.3", Rear: Butcher Grid Trail T7 29 x 2.3"
Brakes
Brakes
SRAM Code RSC, 4-piston caliper, hydraulic disc, 220mm
Cockpit
Stem
Deity, 35.0mm
Handlebar
Roval Traverse SL Carbon, riser bar, 6-degree upsweep, 8-degree backsweep, 30mm rise, 800mm, 35.0mm
Grips
Deity, Knuckleduster, Black
Seat
Saddle
Bridge, 155/143mm, Hollow Ti-rails
Seatpost
RockShox Reverb AXS, 30.9mm, S2: 125mm, S3: 150mm, S4/S5: 170mm
Motor & Battery
Motor
Specialized SL 1.1, custom lightweight motor
Battery
Specialized SL1-320, fully integrated, 320Wh
Charger
Custom charger, 48V System w/ SL system charger plug
Fit data
Numbers for sizing and ride feel.
| Size | S2 | S3 | S4 | S5 |
|---|---|---|---|---|
| Stack Reach Ratio | 1.421 mm | 1.361 mm | 1.309 mm | 1.263 mm |
| Bottom Bracket Height | 350 mm | 350 mm | 350 mm | 350 mm |
| Front Center | 782 mm | 812 mm | 841 mm | 871 mm |
| Rake | 46 mm | 46 mm | 46 mm | 46 mm |
| Trail | 136 mm | 136 mm | 136 mm | 136 mm |
| Stack | 618 mm | 626 mm | 635 mm | 644 mm |
| Reach | 435 mm | 460 mm | 485 mm | 510 mm |
| Seat Tube Angle | 76 ° | 76 ° | 76 ° | 76 ° |
| Seat Tube Length | 400 mm | 420 mm | 440 mm | 465 mm |
| Head Tube Angle | 63.5 ° | 63.5 ° | 63.5 ° | 63.5 ° |
| Head Tube Length | 105 mm | 115 mm | 125 mm | 135 mm |
| Chainstay Length | 447 mm | 447 mm | 447 mm | 447 mm |
| Wheelbase | 1228 mm | 1258 mm | 1287 mm | 1316 mm |
| Bottom Bracket Drop | 25 mm | 25 mm | 25 mm | 25 mm |
| Standover Height | 779 mm | 779 mm | 792 mm | 802 mm |
| Wheels | 29" | 29" | 29" | 29" |
| Rider Min Height | 157 cm | 165 cm | 172 cm | 177 cm |
| Rider Max Height | 172 cm | 180 cm | 188 cm | 193 cm |
About this model
S-Works Turbo Kenevo SL belongs to the Specialized E Turbo Kenevo model. Specialized released 18 e-bikes variations of this model so far. You can get a glimpse at all models from 2022, by clicking on this link.
Model range prices
Specialized Turbo Kenevo SL Comp 2022 is the most economical model, with a starting price of 9000$. Specialized S-Works Turbo Kenevo SL 2022 on the other hand costs 15000$, and is the most expensive model.
Safety
Make sure you wear a helmet on every ride, and that your bike performs well. In short, this means checking the tires, brakes, and chain to make sure everything is in good working order.
Enduro e-bikes average price
If you want to purchase a solid Enduro e-bike, it is important to know that the average cost is 4785$. However, you could also get a good Enduro e-bike even if you pay a lower amount than the average price. In conclusion, always check e-bike reviews and their components before making a purchase to make sure you don’t overpay.
When Specialized released this model in 2022, its price was 15000$. Comparing the average cost of an Enduro e-bike to this one, you will see that S-Works Turbo Kenevo SL price is 213.48% more expensive.
Internal Cable Routing
Moreover, this bike comes with internal cable routing allowing you to keep the cables in a good condition. It also makes it look more professional.
Overview of components
Fork
The fork installed on this bike is the Fox Factory Float 38 model. The travel on this model is 170mm. Bike forks are great for shock absorption and provide you with a smooth ride. In short, make sure you choose one with a decent fork when you purchase your dream bike.
Rear Shock
Specialized S-Works Turbo Kenevo SL e-bike has the FOX FLOAT X2 Factory model installed, and has a travel of 170mm. Bike rear shocks are a great way to increase comfort on the bike and give you more control when riding on technical trails. To sum up, always consider getting a bike that has a rear shock as well.
Wheels
The wheels on S-Works Turbo Kenevo SL are the 29″ aluminum type. These wheels are more forgiving when you go over roots, rocks, bumps, or other obstacles you encounter on your ride. However, 29″ wheels will make your e-bike react slower to obstacles you may encounter.
Brakes
Stopping the bike when needed, it’s essential for your safety. This e-bike has Hydraulic Disc brakes. Hydraulic disc brakes provide amazing stopping power, no matter what the terrain. To sum up, these are ideal for anyone.
Sizes
This e-bike is available in 4 sizes. They vary from 157 cm – 193 cm (5.15 ft – 6.33 ft). In short, it won’t be difficult to find the right one for you.
Dropper post
A dropper post is included with the S-Works Turbo Kenevo SL. A dropper post is a must-have these days if you’re riding anything remotely technical. The main benefit of a dropper post is increased safety while riding. As mentioned above, the lever system allows you to quickly move the saddle out of the way when approaching descents or trail obstacles.
