Specialized S-Works Turbo Kenevo SL 2023
Bike details
Key information split into simple groups.
Bike summary
-
-
Frame Carbon
-
Wheels 29"
-
Travel Front 170mm
-
Travel Rear 170mm
-
Fork Fox Factory Float 38
-
Groupset XX1 Eagle AXS, SRAM
-
Suspension Full
-
Motor Specialized 240W 35Nm mid-drive
-
Battery Specialized SL1-320, fully integrated, 320Wh
-
Drivetrain 1 × 12 Electronic
-
Brakes Hydraulic Disc
Recommended size guide.
S2
157cm - 172cm
S3
165cm - 180cm
S4
172cm - 188cm
S5
177cm - 193cm
Parts list
Main components, grouped by system.
Bike components
Frame
Frame
FACT 11m full carbon, 29", full internal cable routing, 148mm spacing, fully sealed cartridge bearings, 170mm rear travel, geo adjust head tube, geo adjust horst pivot
Suspension Fork
FOX FLOAT 38 Factory 29, Grip2 damper, 44mm offset, HSC, LSC, HSR, LSR, 110x15mm, 1.5" tapered steerer, 170mm travel, Kashima
Rear Shock
FOX FLOAT X2 Factory, LSC, LSR, 2-position lever, 62.5x230mm, Kashima
Drivetrain
Rear Derailleur
SRAM XX1 Eagle AXS
Shift Levers
SRAM Eagle AXS Rocker Paddle
Cassette
SRAM XG-1299 Eagle, 10-52t
Crank
Praxis Carbon/M30 Spindle Interface, SRAM X-Sync Eagle, 94 BCD, 32T, alloy
Chain
SRAM XX1, 12 speed
Wheels
Tires
Front: Butcher Grid Trail T9 29x2.3", Rear: Butcher Grid Trail T7 29 x 2.3"
Brakes
Brakes
Front: SRAM Code RSC, 4-piston caliper, hydraulic disc, 220mm, Rear: SRAM Code RSC, 4-piston caliper, hydraulic disc, 220mm
Cockpit
Stem
Deity, 35.0mm
Handlebar
Roval Traverse SL Carbon, riser bar, 6-degree upsweep, 8-degree backsweep, 30mm rise, 800mm, 35.0mm
Grips
Deity, Knuckleduster, Black
Seat
Saddle
Bridge, 155/143mm, Hollow Ti-rails
Seatpost
RockShox Reverb AXS, 30.9mm, S2: 125mm, S3: 150mm, S4/S5: 170mm
Motor & Battery
Motor
Specialized SL 1.1, custom lightweight motor
Battery
Specialized SL1-320, fully integrated, 320Wh
Charger
Custom charger, 48V System w/ SL system charger plug
Fit data
Numbers for sizing and ride feel.
| Size | S2 | S3 | S4 | S5 |
|---|---|---|---|---|
| Stack Reach Ratio | 1.421 mm | 1.361 mm | 1.309 mm | 1.263 mm |
| Bottom Bracket Height | 350 mm | 350 mm | 350 mm | 350 mm |
| Front Center | 782 mm | 812 mm | 841 mm | 871 mm |
| Rake | 46 mm | 46 mm | 46 mm | 46 mm |
| Trail | 136 mm | 136 mm | 136 mm | 136 mm |
| Stack | 618 mm | 626 mm | 635 mm | 644 mm |
| Reach | 435 mm | 460 mm | 485 mm | 510 mm |
| Seat Tube Angle | 76 ° | 76 ° | 76 ° | 76 ° |
| Seat Tube Length | 400 mm | 420 mm | 440 mm | 465 mm |
| Head Tube Angle | 63.5 ° | 63.5 ° | 63.5 ° | 63.5 ° |
| Head Tube Length | 105 mm | 115 mm | 125 mm | 135 mm |
| Chainstay Length | 447 mm | 447 mm | 447 mm | 447 mm |
| Wheelbase | 1228 mm | 1258 mm | 1287 mm | 1316 mm |
| Bottom Bracket Drop | 25 mm | 25 mm | 25 mm | 25 mm |
| Standover Height | 779 mm | 779 mm | 792 mm | 802 mm |
| Wheels | 29" | 29" | 29" | 29" |
| Rider Min Height | 157 cm | 165 cm | 172 cm | 177 cm |
| Rider Max Height | 172 cm | 180 cm | 188 cm | 193 cm |
About this model
S-Works Turbo Kenevo SL belongs to the Specialized E Turbo Kenevo model. 18 e-bikes variations carry this model name so far. You can get a glimpse at all models from 2023, by clicking on this link.
Model range prices
Specialized Turbo Kenevo Comp 2023 is the cheapest e-bike model and costs 6000$. Specialized S-Works Turbo Kenevo SL 2023 is the most expensive one and costs 15000$.
Safety
When cycling always take safety very seriously. Wear a helmet, obey the traffic rules and wear hi-vis clothes. In short, take care of yourself so others can take care of you.
Enduro e-bikes average price
If you want an acceptable Enduro e-bike you should know that the average price is 4785$. However, you could also get a good Enduro e-bike even if you pay a lower amount than the average price. To make sure you don’t pay a higher amount than normal for your e-bike, always do some components analysis and read reviews.
This e-bike was released in 2023 and its price was 15000$. In conclusion, this e-bike price is 213.48% higher than the price of the average Enduro e-bike.
Internal Cable Routing
It’s also important to mention the internal cable routing that this e-bike has. In short, this will allow you to keep your bike cables in great condition. Say goodbye to hanging cables.
Overview of components
Fork
This e-bike has the Fox Factory Float 38 fork installed. The fork’s travel is 170mm. Bike forks are good shock absorbers and provide a smooth ride and a great experience. To sum it all, when buying a bike, ensure that you look for a fork capable of decent travel.
Rear Shock
The S-Works Turbo Kenevo SL has a rear shock with a travel of 170mm. The model FOX FLOAT X2 Factory is the one installed in this e-bike. Rear shocks give you increased comfort, control, and traction, which is important when cornering or braking. This allows you to ride faster on bumpy roads. To sum up, always consider getting a bike that has a rear shock as well.
Wheels size
When leaving the production line, the S-Works Turbo Kenevo SL model has 29″ wheels. Having 29″ wheels means that you need less fork travel, leading to a reduction of the pedal bob effect. However, 29″ wheels will make your e-bike react slower to obstacles you may encounter.
Brakes
Stopping the bike when needed, it’s essential for your safety. This e-bike has Hydraulic Disc brakes. These kinds of brakes are among the most popular models used on bikes. To sum up, these are ideal for anyone.
Sizes
S-Works Turbo Kenevo SL comes in 4 sizes, that range from 157 cm – 193 cm (5.15 ft – 6.33 ft). In conclusion, finding one for you shouldn’t be a problem.
Dropper post
Specialized S-Works Turbo Kenevo SL comes with a dropper post. If you are a technical rider, a dropper post is essential. A dropper post provides increased safety while riding. The lever system, allows you to move your saddle up and down, which is very useful on climbs and descends.
