Vitus Sommet 29 VRX 2020
Bike details
Key information split into simple groups.
Bike summary
-
-
Frame Aluminum
-
Wheels 29"
-
Travel Front 170mm
-
Travel Rear 160mm
-
Fork Fox Factory Float 36
-
Groupset XTR, Shimano
-
Suspension Full
-
Drivetrain 1 × 12
-
Brakes Hydraulic Disc
Recommended size guide.
SM
157cm - 169cm
MD
166cm - 179cm
LG
176cm - 189cm
XL
187cm - 200cm
Parts list
Main components, grouped by system.
Bike components
Frame
Frame
Sommet 29" 160mm travel full suspension frame, Boost, 6061 Alloy
Suspension Fork
Fox Float 36 Factory FIT GRIP 2 170mm, 29in, Fit Grip 2, Light Compression Tune, HSC/LSC/HSR/LSR adjusters, Kabolt 110, 44mm Offset
Rear Shock
Fox Float DPX2 Factory, 3pos lever, Trunnion, Evol LV air spring, 205mm x 62.5mm, 0.6 Spacer, custom tune
Drivetrain
Rear Derailleur
Shimano XTR 12 speed, RD-M9100, SHADOW PLUS
Front Derailleur
N/A, N/A
Shift Levers
Shimano XT 12 speed SL-M8100-R, I-Spec EV
Cassette
Shimano XT 12 speed 10-51T, CS-M8100-12, 10-12-14-16-18-21-24-28-33-39-45-51T
Crank
Raceface NEXT R carbon, 32T shimano 12 speed, 170mm
Bottom Bracket
Raceface BSA 73mm, Ø30mm
Chain
KMC Z9 EPT Anti Rust CN-M8100
Wheels
Front Hub
EX1501 Spline 30 Boost 110x15mm, CENTER LOCK,
Rear Hub
EX1501 Spline, Boost 148x12mm, CENTERLOCK, Shimano 12 speed MICROSPLINE
Rims
EX1501 Spline 30 29", 30mm inner rim widt
Spokes
DT Swiss
Tires
MAXXIS ASSEGAI, 29"x2.5"WT, 3C MaxxTerra/EXO+/TR
Brakes
Brakes
Shimano XT M8120 4 piston, METAL PAD(W/FIN), MT800 203mm rotor
Cockpit
Stem
Nukeproof Horizon 50mm * 31.8mm
Handlebar
Nukeproof Horizon AL7050, 25mm Rise, Back 9deg, up 6deg, Bar Diameter 31.8mm Width - S780mm, M780mm, L800mm, XL800mm
Grips
VITUS Tapered, single alloy clamp, sticky rubber
Headset
ACROS ZS 44mm/56mm
Seat
Saddle
WTB Volt 142 RACE 0
Seatpost
Brand X Ascend 31.6mm, Left hand remote lever, S125mm, M150mm, L&XL170mm
Fit data
Numbers for sizing and ride feel.
| Size | SM | MD | LG | XL |
|---|---|---|---|---|
| Stack Reach Ratio | 1.47 mm | 1.41 mm | 1.37 mm | 1.32 mm |
| Bottom Bracket Height | 349 mm | 349 mm | 349 mm | 349 mm |
| Front Center | 749 mm | 779 mm | 803 mm | 832 mm |
| Rake | 44 mm | 44 mm | 44 mm | 44 mm |
| Trail | 120 mm | 120 mm | 120 mm | 120 mm |
| Stack | 625 mm | 634 mm | 643 mm | 652 mm |
| Reach | 424 mm | 449 mm | 469 mm | 494 mm |
| Top Tube Length | 572 mm | 600 mm | 623 mm | 651 mm |
| Seat Tube Angle | 75 ° | 75 ° | 75 ° | 75 ° |
| Seat Tube Length | 382 mm | 433 mm | 483 mm | 523 mm |
| Head Tube Angle | 65.5 ° | 65.5 ° | 65.5 ° | 65.5 ° |
| Head Tube Length | 100 mm | 110 mm | 120 mm | 130 mm |
| Chainstay Length | 449 mm | 449 mm | 449 mm | 449 mm |
| Wheelbase | 1197 mm | 1226 mm | 1250 mm | 1279 mm |
| Bottom Bracket Drop | 25 mm | 25 mm | 25 mm | 25 mm |
| Wheels | 29" | 29" | 29" | 29" |
| Rider Min Height | 157 cm | 166 cm | 176 cm | 187 cm |
| Rider Max Height | 169 cm | 179 cm | 189 cm | 200 cm |
Model Overview
Sommet 29 VRX is a Vitus Sommet model. Vitus launched 79 bikes of this model so far. Check out the entire range from 2020 of this model, by clicking this link.
Model range prices
The most economical model, the Vitus Sommet 29 2020 has a starting price of 2188$. Vitus Sommet 27 CRX 2020 on the other hand is the most expensive at 4864$.
Safety
Make sure you wear a helmet on every ride, and that your bike performs well. In short, this means checking the tires, brakes, and chain to make sure everything is in good working order.
Enduro bikes average price
Our math shows that the average cost of a dependable Enduro bike is 3599$. However, even if your budget is less than the average, you might still be able to get a top-quality Enduro bike. In conclusion, always check bike reviews and their components before making a purchase to make sure you don’t overpay.
When Vitus released this model in 2020, its price was 4743$. If we compare this with the average Enduro bike cost we notice that the price is 31.79% higher.
Enduro bikes average weight
Enduro bikes weigh an average of 14.27 kg (31.46 lbs). A lighter bike will give you some extra advantage when climbing. A heavier bike will have more speed for descents.
a bit heavier than average, Sommet 29 VRX has a weight of 15.43 kg (34.02 lbs). To sum up, it’s 8.13% heavier than the average weight of Enduro bikes.
Sommet 29 VRX components
Fork
The fork installed on this bike is the Fox Factory Float 36 model. The travel on this model is 170mm. Bike forks absorb the shocks and give you a smooth and pleasant ride. To sum it all, when buying a bike, ensure that you look for a fork capable of decent travel.
Rear Shock
As for the rear shock, this bike has the Fox Float DPX2 Factory model, with a travel of 160mm. Rear shocks offer better comfort, better traction, and better cornering. This allows for quicker riding on rough roads and trails. In short, if you want smooth rides, get a full-suspension bicycle.
Wheels
As for the wheels, Vitus Sommet 29 VRX 2020, has a 29″ aluminum model. These wheels are more forgiving when you go over roots, rocks, bumps, or other obstacles you encounter on your ride. However, the 29″ wheels will add a little more weight to the bike itself.
Brakes
Stopping the bike when needed, it’s essential for your safety. This bike has Hydraulic Disc brakes. Hydraulic disc brakes provide amazing stopping power, no matter what the terrain. To sum up, you can ride your bike with confidence.
Sizes
There are 4 sizes available for this model. Rider height can be anywhere between 157 cm – 200 cm (5.15 ft – 6.56 ft). In conclusion, it won’t take much to find one that’s right for you.
Dropper post
Vitus Sommet 29 VRX includes a dropper post. If you are a technical rider, a dropper post is essential. A dropper post provides increased safety while riding. The lever system, allows you to move your saddle up and down, which is very useful on climbs and descends.
