Yeti SB100 — T/Series Frameset 2020
2020 Mountain
Estimate price |
3,399$
Weight | 2.68 kg 
Bike details
Overview
Key information split into simple groups.
Frame summary
-
Category -
Frame Carbon -
Wheels 29" -
Travel Rear 100mm -
Suspension Full
Sizing
Recommended size guide.
SM
158cm - 171cm
MD
168cm - 180cm
LG
178cm - 189cm
XL
186cm - 199cm
Parts list
Components
Main components, grouped by system.
Bike components
Frame
Frame
TURQ Series carbon fiber frame, Switch Infinity suspension technology, press-fit BB92, internally tunneled cable routing, 148mm x 12mm BOOST dropouts, sealed enduro max pivot bearings, integrated derailleur hanger, and axle.
Rear Shock
FOX FACTORY DPS 190 X 37.5MM
Drivetrain
Bottom Bracket
BB86/BB92, press-fit
Fit data
Geometry
Numbers for sizing and ride feel.
| Size | SM | MD | LG | XL |
|---|---|---|---|---|
| Stack Reach Ratio | 1.49 mm | 1.42 mm | 1.39 mm | 1.38 mm |
| Bottom Bracket Height | 332.1 mm | 332.1 mm | 332 mm | 332 mm |
| Front Center | 985.2 mm | 714.2 mm | 740.2 mm | 768.3 mm |
| Stack | 595 mm | 605.1 mm | 620.1 mm | 640.2 mm |
| Reach | 400.1 mm | 425.1 mm | 445.1 mm | 465.1 mm |
| Top Tube Length | 569.7 mm | 598.2 mm | 623.3 mm | 650.2 mm |
| Seat Tube Angle | 74.3 ° | 74.2 ° | 74.1 ° | 74 ° |
| Seat Tube Length | 393 mm | 419 mm | 457 mm | 495 mm |
| Head Tube Angle | 67.8 ° | 67.8 ° | 67.8 ° | 67.8 ° |
| Head Tube Length | 96.2 mm | 107 mm | 123.2 mm | 144.7 mm |
| Chainstay Length | 430 mm | 430 mm | 430 mm | 430 mm |
| Wheelbase | 1115 mm | 1144 mm | 1170 mm | 1198 mm |
| Bottom Bracket Drop | 42 mm | 42 mm | 42 mm | 42 mm |
| Standover Height | 717 mm | 717 mm | 717 mm | 717 mm |
| Wheels | 29" | 29" | 29" | 29" |
| Rider Min Height | 158 cm | 168 cm | 178 cm | 186 cm |
| Rider Max Height | 171 cm | 180 cm | 189 cm | 199 cm |
About this model
SB100 — T/Series Frameset is part of the Yeti Sb100 model. Yeti launched 24 frames of this model so far. Check out the entire range from 2020 of this model, by clicking this link.
Model range prices
Yeti SB100 — T/Series Frameset 2020 is the most affordable frame of this model and has a price of 3399$. On the other hand, Yeti SB100 Beti — T/Series / Frameset 2020, is the most expensive and costs 3400$.
Safety
When you go for a ride, don’t forget to put your helmet on. Moreover, ride with traffic, not against it. This will help you stay visible to drivers and also makes it easier for them to see you.
Average price for Crosscountry frames
Our math shows that the average cost of a dependable Crosscountry frame is 1689$. However, even though the average price of a Crosscountry frame is lower, you might still be able to get a top-quality frame. In short, before purchasing your ideal frame do some research about its components, and also check for reviews online.
Furthermore, this bike was made available in 2020 for 3399$. Comparing this to the average Crosscountry frame price, we see that the price is 101.24% higher.
Crosscountry frames average weight
On a deeper look, we notice that the average weight of a Crosscountry frame is 2.04 kg (4.5 lbs). A lighter bike will give you some extra advantage when climbing. A heavier bike will have more speed for descents.
Yeti SB100 — T/Series Frameset it’s weighing 2.68 kg (5.91 lbs). At this weight, is much heavier than average. To sum up, it’s 31.37% heavier than the average weight of Crosscountry frames.
Internal Cable Routing
Moreover, this bike comes with internal cable routing allowing you to keep the cables in a good condition. It also makes it look more professional.
Overview of components
Rear Shock
As for the rear shock, this frame has the FOX FACTORY DPS 190 X 37.5MM model, with a travel of 100mm. Bike rear shocks increase the riding comfort, and also give you more control over technical trails. In short, if you want smooth rides, get a full-suspension bicycle.
Sizes
SB100 — T/Series Frameset comes in 4 sizes, that range from 158 cm – 199 cm (5.18 ft – 6.53 ft). In conclusion, finding one for you shouldn’t be a problem.