Yeti SB100 — T/Series / XX1 2019
2019 Mountain
Estimate price |
8,999$
Weight | 11.66 kg 
Bike details
Overview
Key information split into simple groups.
Bike summary
-
Category -
Frame Carbon -
Wheels 29" -
Travel Front 120mm -
Travel Rear 100mm -
Fork Fox Factory Float 34
-
Groupset XX1 Eagle, X01 -
Suspension Full -
Drivetrain 1 × 12 -
Brakes Hydraulic Disc
Sizing
Recommended size guide.
SM
158cm - 171cm
MD
168cm - 180cm
LG
178cm - 189cm
XL
186cm - 199cm
Parts list
Components
Main components, grouped by system.
Bike components
Frame
Frame
TURQ Series carbon fiber frame, Switch Infinity suspension technology, press-fit BB92, fully enclosed internal cable routing, 148mm x 12mm BOOST dropouts, sealed Enduro Max pivot bearings, integrated derailleur hanger, and axle.
Suspension Fork
FOX FACTORY 34/120MM SC
Rear Shock
FOX FACTORY DPS, 190mm X 37.5mm
Drivetrain
Rear Derailleur
SRAM XX1 EAGLE
Shift Levers
SRAM XX1 EAGLE
Cassette
SRAM 1299 EAGLE 10-50
Crank
SRAM X01 CARBON EAGLE 30T
Bottom Bracket
SRAM DUB BB92
Chain
SRAM XX1 EAGLE
Wheels
Rims
DT SWISS XM 1501 SPLINE ONE 25
Tires
MAXXIS MINION DHF 2.3
Brakes
Brakes
SRAM LEVEL ULTIMATE
Disk Rotors
SRAM CENTERLINE Front 180mm / Rear 160mm
Cockpit
Stem
RACE FACE TURBINE 35x50mm
Handlebar
YETI CARBON 35x760mm
Grips
ERGON GE1
Headset
CANE CREEK 40 INTEGRATED
Seat
Saddle
ERGON SME3 CUSTOM
Seatpost
FOX TRANSFER FACTORY 30.9MM / SM: 100MM, MD: 125MM, L-XL: 150MM
Fit data
Geometry
Numbers for sizing and ride feel.
| Size | SM | MD | LG | XL |
|---|---|---|---|---|
| Stack Reach Ratio | 1.49 mm | 1.42 mm | 1.39 mm | 1.38 mm |
| Bottom Bracket Height | 332 mm | 332 mm | 332 mm | 332 mm |
| Front Center | 685.2 mm | 714.2 mm | 740.2 mm | 768.3 mm |
| Stack | 595 mm | 605.1 mm | 620.1 mm | 640.2 mm |
| Reach | 400.1 mm | 425.1 mm | 445.1 mm | 465.1 mm |
| Top Tube Length | 569.7 mm | 598.2 mm | 623.3 mm | 650.2 mm |
| Seat Tube Angle | 74.3 ° | 74.2 ° | 74.1 ° | 74 ° |
| Seat Tube Length | 393 mm | 419 mm | 457 mm | 495 mm |
| Head Tube Angle | 67.8 ° | 67.8 ° | 67.8 ° | 67.8 ° |
| Head Tube Length | 96.2 mm | 107 mm | 123.2 mm | 144.7 mm |
| Chainstay Length | 430 mm | 430 mm | 430 mm | 430 mm |
| Wheelbase | 1115 mm | 1144 mm | 1170 mm | 1198 mm |
| Bottom Bracket Drop | 42 mm | 42 mm | 42 mm | 42 mm |
| Standover Height | 717 mm | 717 mm | 717 mm | 717 mm |
| Wheels | 29" | 29" | 29" | 29" |
| Rider Min Height | 158 cm | 168 cm | 178 cm | 186 cm |
| Rider Max Height | 171 cm | 180 cm | 189 cm | 199 cm |
Model Overview
SB100 — T/Series / XX1 is a Yeti Sb100 model. Yeti launched 24 bikes of this model so far. You can easily view all of the Yeti Sb100 bikes models from 2019, here.
Model range prices
The most economical model, the Yeti SB100 Beti — C/Series / GX 2019 has a starting price of 4999$. Yeti SB100 — T/Series / XX1 2019 on the other hand is the most expensive at 8999$.
Safety
When you go for a ride, don’t forget to put your helmet on. Moreover, ride with traffic, not against it. This will help you stay visible to drivers and also makes it easier for them to see you.
Average price for Crosscountry bikes
Our math shows that the average cost of a dependable Crosscountry bike is 1905$. However, even if your budget is less than the average, you might still be able to get a top-quality Crosscountry bike. To sum up, when you purchase your bike, make sure to check if it has reviews, and also do some components research.
Furthermore, if we have a quick look at this model’s cost, we can see that at its release date the price was 8999$. If we compare this with the average Crosscountry bike cost we notice that the price is 372.39% higher.
Crosscountry bikes average weight
The average weight for Crosscountry bikes is 12.4 kg (27.34 lbs). It is a good advantage to have a lighter bike than the average. However, a heavier bike is more efficient on descents.
a bit lighter than average, SB100 — T/Series / XX1 has a weight of 11.66 kg (25.71 lbs). In other words, this model is 6.35% lighter than the average Crosscountry bike.
Internal Cable Routing
Moreover, this bike comes with internal cable routing allowing you to keep the cables in a good condition. It also makes it look more professional.
Overview of components
Fork
The Fox Factory Float 34 is included from the factory. It has a travel distance of 120mm. Bike forks are good shock absorbers and provide a smooth ride and a great experience. In short, make sure you choose one with a decent fork when you purchase your dream bike.
Rear Shock
From the factory, it comes with the FOX FACTORY DPS rear shock model, which has a travel of 100mm. Rear shocks give you increased comfort, control, and traction, which is important when cornering or braking. This allows you to ride faster on bumpy roads. In conclusion, to increase your riding experience, get a bike with a rear shock if possible.
Wheels size
When leaving the production line, the SB100 — T/Series / XX1 model has 29″ aluminum wheels. These wheels are more forgiving when you go over roots, rocks, bumps, or other obstacles you encounter on your ride. However, 29″ wheels will make your bike react slower to obstacles you may encounter.
Brakes
Stopping the bike when needed, it’s essential for your safety. This bike has Hydraulic Disc brakes. Hydraulic disc brakes are perfect for mountain biking, road cycling, and commuting. To sum up, you can ride your bike with confidence.
Sizes
Yeti SB100 — T/Series / XX1 bike has 4 sizes, in the range of 158 cm – 199 cm (5.18 ft – 6.53 ft). In conclusion, finding one for you shouldn’t be a problem.
Dropper post
The Yeti model is also equipped with a dropper post. Therefore, climbing or descending will be a breeze.