Yeti SB165 — T/Series / T1 2020
2020 Mountain
Estimate price |
7,199$
Weight | 14.65 kg 
Bike details
Overview
Key information split into simple groups.
Bike summary
-
-
Frame Carbon -
Wheels 27.5" -
Travel Front 180mm -
Travel Rear 165mm -
Fork Fox Factory Float 36
-
Groupset XT -
Suspension Full -
Brakes Hydraulic Disc
Sizing
Recommended size guide.
SM
158cm - 171cm
MD
168cm - 180cm
LG
178cm - 189cm
XL
186cm - 199cm
Parts list
Components
Main components, grouped by system.
Bike components
Frame
Frame
TURQ Series carbon fiber frame, Switch Infinity suspension technology, press-fit BB92, internally tunneled cable routing, 148mm x 12mm BOOST dropouts, sealed enduro max pivot bearings, integrated derailleur hanger, and axle.
Suspension Fork
FOX FACTORY GRIP 2 36/180MM
Rear Shock
FOX FACTORY DHX2 2 POS LEVER 230 X 65MM / SPRING RATE (STEEL): SM: 350, MD: 400, LG: 450, XL: 500
Drivetrain
Rear Derailleur
SHIMANO XT
Shift Levers
SHIMANO XT
Cassette
SHIMANO XT 10-51
Crank
SHIMANO XT 30T 170MM
Bottom Bracket
SHIMANO BB92
Chain
SHIMANO XT
Wheels
Rims
DT SWISS CUSTOM EX1700 30MM
Tires
MAXXIS MINION DHF 2.5 EXO+
Brakes
Brakes
SHIMANO XT 4 PISTON
Disk Rotors
SHIMANO 203/203
Cockpit
Stem
RACE FACE TURBINE BASIC 35X50MM
Handlebar
YETI CARBON 35X800MM
Grips
ODI ELITE PRO
Headset
CANE CREEK 40 INTEGRATED
Seat
Saddle
WTB VOLT CUSTOM
Seatpost
FOX TRANSFER 31.6MM / SM: 125MM, MD: 150MM, LG-XL: 175MM
Fit data
Geometry
Numbers for sizing and ride feel.
| Size | SM | MD | LG | XL |
|---|---|---|---|---|
| Stack Reach Ratio | 1.39 mm | 1.31 mm | 1.27 mm | 1.23 mm |
| Bottom Bracket Height | 344.9 mm | 344.9 mm | 344.9 mm | 344.9 mm |
| Front Center | 764.7 mm | 797.2 mm | 822.2 mm | 852.2 mm |
| Stack | 591.9 mm | 596.9 mm | 606.9 mm | 616.9 mm |
| Reach | 427.1 mm | 457.1 mm | 477.1 mm | 502.1 mm |
| Top Tube Length | 564 mm | 595.5 mm | 618.5 mm | 646.4 mm |
| Seat Tube Angle | 77 ° | 77 ° | 77 ° | 77 ° |
| Seat Tube Length | 380 mm | 410 mm | 450 mm | 495 mm |
| Head Tube Angle | 63.5 ° | 63.5 ° | 63.5 ° | 63.5 ° |
| Head Tube Length | 104.8 mm | 110.4 mm | 121.6 mm | 132.8 mm |
| Chainstay Length | 430 mm | 430 mm | 430 mm | 430 mm |
| Wheelbase | 1194 mm | 1227 mm | 1252 mm | 1282 mm |
| Bottom Bracket Drop | 11 mm | 11 mm | 11 mm | 11 mm |
| Standover Height | 707 mm | 713 mm | 720 mm | 743 mm |
| Wheels | 27" | 27" | 27" | 27" |
| Rider Min Height | 158 cm | 168 cm | 178 cm | 186 cm |
| Rider Max Height | 171 cm | 180 cm | 189 cm | 199 cm |
About this model
SB165 — T/Series / T1 completes the Yeti Sb165 model. There are 28 bikes that carry this model name. Check out the entire range from 2020 of this model, by clicking this link.
Model range prices
Yeti SB165 — C/Series / C1 2020 is the most affordable bike of this model and has a price of 5599$. On the other hand, Yeti SB165 — T/Series / T3 2020, is the most expensive and costs 8799$.
Safety
When cycling always take safety very seriously. Wear a helmet, obey the traffic rules and wear hi-vis clothes. In short, take care of yourself so others can take care of you.
Enduro bikes average price
According to our math, the average price for a trustworthy Enduro bike is 3599$. However, even though the average price of an Enduro bike is lower, you might still be able to get a top-quality bike. As a general rule of thumb, you should always read reviews about the bike and its components before buying it to ensure you don’t pay too much.
This bike was released in 2020 and its price was 7199$. In conclusion, this bike price is 100.03% higher than the price of the average Enduro bike.
Enduro bikes average weight
Enduro bikes have an average weight of 14.27 kg (31.46 lbs). You will have a greater advantage on climbs if your bike is easier than the average. On descents, however, a heavier bike will give you extra speed.
With a weight of 14.65 kg (32.3 lbs), Yeti bike is slightly heavier than average. In conclusion, the average Enduro bike weighs 2.66% less than SB165 — T/Series / T1.
Internal Cable Routing
Moreover, this bike comes with internal cable routing allowing you to keep the cables in a good condition. It also makes it look more professional.
Overview of components
Fork
This bike has the Fox Factory Float 36 fork installed. The fork’s travel is 180mm. Bike forks absorb the shocks and give you a smooth and pleasant ride. In conclusion, always look for a fork with decent travel when you buy a bike.
Rear Shock
From the factory, it comes with the FOX FACTORY DHX2 2 POS LEVER rear shock model, which has a travel of 165mm. Rear shocks improve riding comfort and give you greater control over all terrains. In short, if you want smooth rides, get a full-suspension bicycle.
Wheels size
The SB165 — T/Series / T1 2020 bike is equipped with 27.5″ aluminum wheels when leaving the factory. 27.5″ wheels will reach higher speeds than smaller-sized wheels. However, these wheels have a slower top speed if you compare them to 29″ wheels.
Brakes
Nothing is more important on a bike than its ability to brake properly. Yeti SB165 — T/Series / T1 is equipped with Hydraulic Disc brakes. With Hydraulic Disc brakes, you’ll be able to stop on a dime, even in wet or icy conditions. To sum up, you can ride your bike with confidence.
Sizes
This bike is available in 4 sizes. They vary from 158 cm – 199 cm (5.18 ft – 6.53 ft). In conclusion, it won’t take much to find one that’s right for you.
Dropper post
Yeti SB165 — T/Series / T1 includes a dropper post. If used correctly, a dropper post gives you more faith, maneuverability, and greater control over your bike.