Yeti SB165 — T/Series / T3 2021
2021 Mountain
Estimate price |
9,500$
Weight | 14.11 kg 
Bike details
Overview
Key information split into simple groups.
Bike summary
-
-
Frame Carbon -
Wheels 27.5" -
Travel Front 180mm -
Travel Rear 165mm -
Fork Fox Factory Float 38
-
Groupset XX1 Eagle, X01 Eagle -
Suspension Full -
Brakes Hydraulic Disc
Sizing
Recommended size guide.
SM
158cm - 171cm
MD
168cm - 180cm
LG
178cm - 189cm
XL
186cm - 199cm
Parts list
Components
Main components, grouped by system.
Bike components
Frame
Frame
TURQ Series carbon fiber frame, Switch Infinity suspension technology, press-fit BB92, internally tunneled cable routing, 148mm x 12mm BOOST dropouts, sealed enduro max pivot bearings, integrated derailleur hanger, and axle.
Suspension Fork
FOX FACTORY 38 GRIP 2/180MM
Rear Shock
FOX FACTORY DHX2 2 POS LEVER 230 X 65MM SLS SPRING
Drivetrain
Rear Derailleur
SRAM XX1 EAGLE Upgradable
Shift Levers
SRAM XX1 EAGLE Upgradable
Cassette
SRAM XX1 EAGLE 1299 10-52
Crank
SRAM X01 EAGLE 30T 170MM
Bottom Bracket
SRAM DUB BB92
Chain
SRAM XX1 EAGLE
Wheels
Rims
DT SWISS CUSTOM EX1700 30MM Upgradable
Tires
MAXXIS ASSEGAI 2.5 EXO+
Brakes
Brakes
SRAM CODE RSC
Disk Rotors
SRAM CENTERLINE 200/SRAM CENTERLINE 200
Cockpit
Stem
RACE FACE TURBINE R 35X50MM
Handlebar
YETI CARBON 35X800MM
Grips
ODI ELITE PRO
Headset
CANE CREEK 110 INTEGRATED
Seat
Saddle
ERGON SADDLE
Seatpost
FOX TRANSFER FACTORY 31.6MM / SM: 125MM, MD: 150MM, LG-XL: 175MM
Fit data
Geometry
Numbers for sizing and ride feel.
| Size | SM | MD | LG | XL |
|---|---|---|---|---|
| Stack Reach Ratio | 1.39 mm | 1.31 mm | 1.27 mm | 1.23 mm |
| Bottom Bracket Height | 344.9 mm | 344.9 mm | 344.9 mm | 344.9 mm |
| Front Center | 764.7 mm | 797.2 mm | 822.2 mm | 852.2 mm |
| Stack | 591.9 mm | 596.9 mm | 606.9 mm | 616.9 mm |
| Reach | 427.1 mm | 457.1 mm | 477.1 mm | 502.1 mm |
| Top Tube Length | 564 mm | 595.5 mm | 618.5 mm | 646.4 mm |
| Seat Tube Angle | 77 ° | 77 ° | 77 ° | 77 ° |
| Seat Tube Length | 380 mm | 410 mm | 450 mm | 495 mm |
| Head Tube Angle | 63.5 ° | 63.5 ° | 63.5 ° | 63.5 ° |
| Head Tube Length | 104.8 mm | 110.4 mm | 121.6 mm | 132.8 mm |
| Chainstay Length | 430 mm | 430 mm | 430 mm | 430 mm |
| Wheelbase | 1194 mm | 1227 mm | 1252 mm | 1282 mm |
| Bottom Bracket Drop | 11 mm | 11 mm | 11 mm | 11 mm |
| Standover Height | 707 mm | 713 mm | 720 mm | 743 mm |
| Wheels | 27" | 27" | 27" | 27" |
| Rider Min Height | 158 cm | 168 cm | 178 cm | 186 cm |
| Rider Max Height | 171 cm | 180 cm | 189 cm | 199 cm |
Model Overview
SB165 — T/Series / T3 completes the Yeti Sb165 model. There are 28 bikes that carry this model name. You can easily view all of the Yeti Sb165 bikes models from 2021, here.
Model range prices
The most economical model, the Yeti SB165 — C/Series / C1 2021 has a starting price of 5900$. Yeti SB165 — T/Series / T3 2021 on the other hand is the most expensive at 9500$.
Safety
Take safety seriously when you ride your bike, and always wear your helmet. Moreover, don’t ride on the sidewalk. This is actually against the law in some states and can be dangerous for both you and pedestrians.
Average price for Enduro bikes
According to our math, the average price for a trustworthy Enduro bike is 3599$. However, you could also get a good Enduro bike even if you pay a lower amount than the average price. As a general rule of thumb, you should always read reviews about the bike and its components before buying it to ensure you don’t pay too much.
When Yeti released this model in 2021, its price was 9500$. Doing a quick comparison, we notice that SB165 — T/Series / T3 price is 163.96% higher than the average cost of an Enduro bike.
Average weight for Enduro bikes
If we make a quick analysis of the average weight of an Enduro bike, we get 14.27 kg (31.46 lbs). Having an easier bike than average will give you a great advantage on climbs. However, a heavier bike will gain more speed on descends.
Weighing 14.11 kg (31.11 lbs), the SB165 — T/Series / T3 model is slightly lighter than average. In short, the average Enduro bike weight is 1.13% higher than this one.
Internal Cable Routing
Moreover, this bike comes with internal cable routing allowing you to keep the cables in a good condition. It also makes it look more professional.
Overview of components
Fork
The SB165 — T/Series / T3 comes factory-installed with the Fox Factory Float 38 fork. This has a travel range of 180mm. Bike forks are good shock absorbers and provide a smooth ride and a great experience. To sum it all, when buying a bike, ensure that you look for a fork capable of decent travel.
Rear Shock
The shock that’s installed on this bike is FOX FACTORY DHX2 2 POS LEVER 230 X 65MM SLS SPRING, with a travel distance of 165mm. Rear shocks give you increased comfort, control, and traction, which is important when cornering or braking. This allows you to ride faster on bumpy roads. In short, a full-suspension bike will give you the smoothest ride possible.
Wheels size
The SB165 — T/Series / T3 2021 bike is equipped with 27.5″ aluminum wheels when leaving the factory. These wheels will provide you with more control over the bike. However, the 27.5″ wheels are less forgiving than the 29″ wheels.
Brakes
Stopping the bike when needed, it’s essential for your safety. This bike has Hydraulic Disc brakes. Hydraulic disc brakes provide amazing stopping power, no matter what the terrain. To sum up, these are ideal for anyone.
Sizes
This bike is available in 4 sizes. They vary from 158 cm – 199 cm (5.18 ft – 6.53 ft). In conclusion, finding one for you shouldn’t be a problem.
Dropper post
The Yeti model is also equipped with a dropper post. If used correctly, a dropper post gives you more faith, maneuverability, and greater control over your bike.