Yeti SB6 — T/Series / XX1 2020
2020 Mountain
Estimate price |
9,499$
Weight | 12.73 kg 
Bike details
Overview
Key information split into simple groups.
Bike summary
-
-
Frame Carbon -
Wheels 27.5" -
Travel Front 170mm -
Travel Rear 152mm -
Fork Fox Factory Float 36
-
Groupset X01 Eagle, XX1 Eagle -
Suspension Full -
Brakes Hydraulic Disc
Parts list
Components
Main components, grouped by system.
Bike components
Frame
Frame
TURQ Series carbon fiber frame, Switch Infinity suspension technology, press-fit BB92, fully enclosed internal cable routing, 148mm x 12mm BOOST dropouts, sealed Enduro Max pivot bearings, integrated derailleur hanger, and axle.
Suspension Fork
FOX FACTORY 36/170MM GRIP 2
Rear Shock
FOX FACTORY X2, 8.5” X 2.5”
Drivetrain
Rear Derailleur
SRAM X01 EAGLE
Shift Levers
SRAM XX1 EAGLE
Cassette
SRAM XX1 1299 EAGLE 10-50
Crank
SRAM X01 CARBON EAGLE 30T
Bottom Bracket
SRAM DUB BB92
Chain
SRAM XX1 EAGLE
Wheels
Rims
DT SWISS XM 1501 SPLINE ONE 30MM
Tires
MAXXIS MINION DHF 2.5
Brakes
Brakes
SRAM CODE RSC
Disk Rotors
SRAM CENTERLINE Front 200mm / Rear 180mm
Cockpit
Stem
RACE FACE TURBINE 35X50MM
Handlebar
YETI CARBON 35X800MM
Grips
ERGON GE1
Headset
CANE CREEK 40 INSET
Seat
Saddle
ERGON CUSTOM SME3
Seatpost
FOX TRANSFER FACTORY 30.9MM / XS-S: 100MM, MD: 125MM, L-XL: 150MM
Fit data
Geometry
Numbers for sizing and ride feel.
| Size | SM | MD | LG | XL | XS |
|---|---|---|---|---|---|
| Stack Reach Ratio | 1.54 mm | 1.49 mm | 1.44 mm | 1.41 mm | 1.39 mm |
| Bottom Bracket Height | 350 mm | 349.9 mm | 349.9 mm | 349.7 mm | 349.6 mm |
| Front Center | 690.1 mm | 717.5 mm | 744.2 mm | 771.6 mm | 799.6 mm |
| Stack | 577.2 mm | 592.3 mm | 602.5 mm | 617.6 mm | 637.7 mm |
| Reach | 375.7 mm | 396.2 mm | 418.4 mm | 438.9 mm | 457.7 mm |
| Top Tube Length | 552.4 mm | 577.8 mm | 603.2 mm | 628.7 mm | 654.1 mm |
| Seat Tube Angle | 73 ° | 73 ° | 73 ° | 73 ° | 72.9 ° |
| Seat Tube Length | 381 mm | 419.1 mm | 444.5 mm | 482.6 mm | 520.7 mm |
| Head Tube Angle | 64.94 ° | 64.9 ° | 64.9 ° | 64.9 ° | 64.9 ° |
| Head Tube Length | 93.5 mm | 110 mm | 121 mm | 137.5 mm | 159.5 mm |
| Chainstay Length | 440 mm | 440 mm | 440 mm | 440 mm | 440 mm |
| Wheelbase | 1130 mm | 1157 mm | 1184 mm | 1211 mm | 1239 mm |
| Bottom Bracket Drop | 5 mm | 6 mm | 6 mm | 6 mm | 6 mm |
| Standover Height | 758 mm | 761 mm | 762 mm | 763 mm | 762 mm |
| Wheels | 27" | 27" | 27" | 27" | 27" |
About this model
SB6 — T/Series / XX1 belongs to the Yeti Sb6 model. There are 17 bikes that carry this model name. You can easily view all of the Yeti Sb6 bikes models from 2020, here.
Model range prices
The most economical model, the Yeti SB6 — C/Series / GX 2020 has a starting price of 5199$. Yeti SB6 — T/Series / XX1 2020 on the other hand is the most expensive at 9499$.
Safety
When you go for a ride, don’t forget to put your helmet on. Moreover, ride with traffic, not against it. This will help you stay visible to drivers and also makes it easier for them to see you.
Average price for Enduro bikes
If you want an acceptable Enduro bike you should know that the average price is 3599$. However, you could also get a good Enduro bike even if you pay a lower amount than the average price. In conclusion, always check bike reviews and their components before making a purchase to make sure you don’t overpay.
This bike was released in 2020 and its price was 9499$. Comparing this to the average Enduro bike price, we see that the price is 163.93% higher.
Enduro bikes average weight
Enduro bikes have an average weight of 14.27 kg (31.46 lbs). A lighter bike will give you some extra advantage when climbing. A heavier bike will have more speed for descents.
With a weight of 12.73 kg (28.06 lbs), Yeti bike is considerably lighter than average. In short, the average Enduro bike weight is 12.1% higher than this one.
Internal Cable Routing
Moreover, this bike comes with internal cable routing allowing you to keep the cables in a good condition. It also makes it look more professional.
SB6 — T/Series / XX1 components
Fork
The Fox Factory Float 36 is included from the factory. It has a travel distance of 170mm. Bike forks are great for shock absorption and provide you with a smooth ride. In conclusion, always look for a fork with decent travel when you buy a bike.
Rear Shock
The shock that’s installed on this bike is FOX FACTORY X2, with a travel distance of 152mm. Bike rear shocks are a great way to increase comfort on the bike and give you more control when riding on technical trails. To sum up, always consider getting a bike that has a rear shock as well.
Wheels
When it comes to wheels, the SB6 — T/Series / XX1 bike is equipped with the 27.5″ aluminum model. The 27.5″ wheels are a great choice for smaller riders. However, these wheels have a slower top speed if you compare them to 29″ wheels.
Brakes
Stopping the bike when needed, it’s essential for your safety. This bike has Hydraulic Disc brakes. Hydraulic disc brakes are perfect for mountain biking, road cycling, and commuting. To sum up, you can ride your bike with confidence.
Dropper post
Every bike should have a dropper post, and this one does. Therefore, climbing or descending will be a breeze.