Haro Steel Reserve 1.1 2018
2018 Mountain
Estimate price |
549$
Weight | 12.97 kg 
Bike details
Overview
Key information split into simple groups.
Bike summary
-
-
Frame Steel -
Wheels 26" -
Suspension Rigid -
Brakes Mechanical Disc
Parts list
Components
Main components, grouped by system.
Bike components
Frame
Frame
Chromoly
Suspension Fork
Rigid Chromoly, suspension-corrected, IS disc brake mount
Rear Shock
N/A
Drivetrain
Rear Derailleur
N/A
Front Derailleur
N/A
Shift Levers
N/A
Cassette
12 tooth CrMo cog
Crank
Haro CrMo 8 Spline, 3-piece
Bottom Bracket
4 x sealed bearing, Euro
Chain
KMC HV410, 1/2" x 1/8"
Chain Guide
N/A
Pedals
Wellgo platform alloy, replaceable pins
Wheels
Front Hub
Weinmann XM260
Rear Hub
Weinmann XM260
Rims
Weinmann XM260, alloy double wall
Spokes
Weinmann XM260
Tires
Kenda K-Rad 2.3"
Brakes
Brakes
Tektro Aries MD-M280
Brake Levers
Tektro ML-330
Cockpit
Stem
Haro, alloy, 1-1/8"
Handlebar
Haro Steel, 65mm riser bar, 730mm wide, 6° back sweep
Grips
Haro Counterfeit
Headset
VP-A46ACM
Seat
Saddle
Haro, padded Slim one piece seat/post
Seatpost
Alloy, included with seat
Fit data
Geometry
Numbers for sizing and ride feel.
| Size | Short | Long |
|---|---|---|
| Stack Reach Ratio | 1.43 mm | 1.36 mm |
| Bottom Bracket Height | 325 mm | 325 mm |
| Front Center | 624 mm | 642 mm |
| Rake | 40 mm | 39 mm |
| Trail | 89 mm | 90 mm |
| Stack | 546 mm | 546 mm |
| Reach | 383 mm | 402 mm |
| Top Tube Length | 559 mm | 575 mm |
| Seat Tube Angle | 70 ° | 70 ° |
| Seat Tube Length | 285 mm | 285 mm |
| Head Tube Angle | 69 ° | 69 ° |
| Head Tube Length | 117 mm | 117 mm |
| Chainstay Length | 393 mm | 393 mm |
| Wheelbase | 1016 mm | 1034 mm |
| Bottom Bracket Drop | 17 mm | 17 mm |
| Standover Height | 674 mm | 668 mm |
| Wheels | 26" | 26" |
Model Overview
Steel Reserve 1.1 is a Haro Steel model. Haro released 12 bikes variations of this model so far. Check out the entire range from 2018 of this model, by clicking this link.
Model range prices
Haro Steel Reserve 1.1 2018 is the most affordable bike of this model and has a price of 549$. On the other hand, Haro Steel Reserve 1.3 2018, is the most expensive and costs 1579$.
Safety
Take safety seriously when you ride your bike, and always wear your helmet. Moreover, don’t ride on the sidewalk. This is actually against the law in some states and can be dangerous for both you and pedestrians.
Average price for Dirt Jump bikes
According to our calculations, the average cost of a Dirt Jump bike that is reliable is 863$. However, even if your budget is less than the average, you might still be able to get a top-quality Dirt Jump bike. In conclusion, always check bike reviews and their components before making a purchase to make sure you don’t overpay.
When Haro released this model in 2018, its price was 549$. Comparing the average cost of a Dirt Jump bike to this one, you will see that Steel Reserve 1.1 price is 57.19% smaller.
Average weight for Dirt Jump bikes
Dirt Jump bikes weigh an average of 12.37 kg (27.27 lbs). A lighter bike will give you some extra advantage when climbing. A heavier bike will have more speed for descents.
Haro Steel Reserve 1.1 it’s weighing 12.97 kg (28.59 lbs). At this weight, is slightly heavier than average. In short, the average Dirt Jump bike weight is 4.85% lower than this one.
Steel Reserve 1.1 components
Fork material
The fork is made out of steel, which tends to be more flexible than carbon forks in general. However, a carbon fork is considerably lighter.
Wheels
When it comes to wheels, the Steel Reserve 1.1 bike is equipped with the 26″ aluminum model. The 26″ wheels are lighter than the 27.5 or 29″ wheels. However, they are less forgiving when riding over obstacles such as bumps and roots.
Brakes
When you want to stop the bike in time, the brakes are vital. The Steel Reserve 1.1 has Mechanical Disc brakes. These brakes are also very popular, and a lot cheaper than hydraulic disk brakes. However, with hydraulic disk brakes, you have the ultimate braking power!